CS Paper Radar

Spatio-Temporal Calibration of a Vehicle-Mounted Microphone Array for Autonomous Driving

Marvin Seegert, Richard Taupitz, Korbinian Moller, Johannes Betz

cs.SD eess.AS ·submitted 2026-11-10 12:44 UTC · v1

Abstract

Microphones let an autonomous vehicle sense into areas its cameras and LiDAR cannot see, by picking up the sound that other traffic participants emit. Locating those sources and fusing them with the visual perception requires the microphone array to be calibrated and registered relative to the vehicle's other sensors. Existing calibration methods assume small, unobstructed indoor rigs, whereas a vehicle body casts an acoustic shadow that straight-line propagation cannot represent, and to our knowledge no calibration of an array distributed around a vehicle has been reported. We propose a pipeline that uses a balloon burst as a single cross-modal target, which the LiDAR locates in metric coordinates, every microphone hears as a sharp onset and a camera times. Each observation is weighted by its own timing variance, which discounts shadowed arrivals instead of discarding them and needs no model of the vehicle. On a full-size vehicle with eight microphones over a 4.9 m aperture, the held-out range residual of 6.37 cm approaches the 6.07 cm floor set by the onset timing noise, and the calibrated array tracks a moving source to within a few degrees of the vehicle's own LiDAR. A dozen bursts spread around the vehicle suffice, and spreading them matters more than adding more.

Comment
Submitted to IEEE ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

AcousticBEV: Acoustic BEV Object Localization for Intelligent Vehicles

cs.CV cs.RO ·2026-11-14 ·Ziang Liu, Shiming Wang, Joseph Adeola, Julian F. P. Kooij
datasethot direction similarity 0.75
Abstract · Ziang Liu and Shiming Wang have equal contributions. Shiming Wang is the project lead

Modern autonomous driving and driver assistance systems rely predominantly on cameras, radars and LiDARs for environmental perception. However, these modalities face different environmental limitations, including poor illumination for cameras and adverse weather for LiDAR. Acoustic sensing, particularly using microphone arrays, could provide complementary perception capabilities for autonomous driving, but has remained largely underexplored. In this work, we design a horizontally arranged microphone array that functions as the "ears" of a vehicle, enabling localization of nearby moving vehicles in a bird's-eye view (BEV) representation that captures both their relative direction and distance. Using this array, we collect a real-world driving dataset, AcousticScenes, which contains 2,117 static and 2,863 dynamic samples with synchronized spatial acoustic signals, LiDAR point clouds and 3D bounding box annotations. Building on this dataset, we propose AcousticBEV, a learning-based method for acoustic BEV object localization, which estimates the center locations of moving traffic participants in BEV from the microphone-array signals, conditioned on the ego vehicle's own speed. Experimental results demonstrate that AcousticBEV outperforms both classical signal-processing baselines and other learning-based methods, achieving F1 scores of $47.7 \pm 1.2$% on "Easy" scenarios and $45.1 \pm 1.4$% on "Difficult" cases. Our findings demonstrate that acoustic signals from a low-cost, vehicle-mounted microphone array can localize nearby moving vehicles in both azimuth and distance.

0.20

A Multi-Modal Perception Pipeline for Object Detection and Tracking in Autonomous Racing

cs.RO cs.AI ·2026-09-08 ·Davide Malvezzi, Michele Pestarino, Vittoria Cavicchioli, Valentina La Gamba, Silvia Severi +7 more
hot direction similarity 0.64
Abstract · 8 pages, 6 figures, ITSC 2026, Invited Session

Object detection and tracking are fundamental components of perception systems for autonomous driving. Achieving robust performance under adverse conditions such as limited visibility, sensor noise, and failures remains an open challenge, particularly in autonomous racing, where vehicles operate at very high speeds, experience strong vibrations, and interact under small safety margins. This paper presents a multi-modal late-fusion perception pipeline for object detection and tracking in the autonomous racing domain. The proposed system extends previous work by exploiting all onboard sensors through a late-fusion approach and a dedicated multi-object tracking framework. Independent detections from cameras, LiDARs, and RADARs are combined to provide timely and robust state estimates of surrounding vehicles. The tracking method explicitly compensates for detection delays and embeds in its model prior knowledge of vehicle dynamics and track layout. Experimental evaluation on real-world data across diverse critical scenarios, representative of challenging edge cases also in urban driving, confirms the effectiveness of the proposed pipeline and its suitability to support safe and adaptive planning decisions.

0.32

Beam-Wise Statistical Background Subtraction for Static Roadside LiDAR: A Cross-Sensor Benchmark Study

cs.CV cs.RO ·2026-08-14 ·Alexander Baumann, Marcel Vosshans, Thao Dang
publishedbenchmarkdatasetcode/data similarity 0.62
Abstract · Accepted for publication at the 2026 IEEE 29th International Conference on Intelligent Transportation Systems (ITSC), Naples, Italy, Septemb…

Background subtraction is a key preprocessing step for infrastructure-based LiDAR perception, enabling efficient isolation of dynamic traffic participants without semantic annotations. However, systematic cross-sensor evaluations and reproducible studies for static roadside LiDAR are missing. This paper presents a comparative benchmark of beam-wise statistical background subtraction for statically mounted LiDAR sensors. We formulate background estimation as a per-beam temporal modeling problem and investigate complementary statistical strategies that capture dominant as well as multi-modal background structures, combined with spatial filtering in the angular and 3D domain. To enable reproducible evaluation, we introduce HighwayScene, a new multi-LiDAR dataset recorded in a static roadside setup, and extend the public CoopScenes dataset with static/dynamic point-wise annotations. Across multiple scenes and heterogeneous sensing technologies, we demonstrate that beam-wise statistical modeling provides a robust and transferable solution. Combining lightweight per-beam models with spatial consistency filtering substantially improves precision while maintaining high recall and real-time capability. All datasets, annotations, and implementations are publicly released.

0.35

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.61
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35

Self-Localization of Distributed Microphone Arrays Using One Source and Acoustic Reflections

cs.SD ·2026-10-30 ·Thomas Guffroy, Jean-Daniel Pascal Prieto, Cédric Foy, Antoine Deleforge
similarity 0.61
Abstract

We present a method to estimate the relative position and orientation of two non-coplanar microphone arrays using a room impulse response (RIR) from a single source. The approach exploits early acoustic reflections, retrieved by each array in the form of a 3D image-source point cloud, using a recently-proposed image-source localization technique. The task is then reduced to aligning the two unlabeled point clouds, which is made difficult by their inherent symmetries and by spurious, missing and noisy estimates. To this aim we introduce ARCTIC, a point-cloud registration algorithm that performs a ranked search over congruent triangles anchored on the true source. Simulated and real experiments show that ARCTIC strongly outperforms two baselines, achieving mean angular and radial self-localization errors below 5 and 10 cm across 36 real RIRs measured in 6 different rooms.

0.31

MM-BEV: Enhancing Timeliness by Computing Where and When it Matters

cs.RO cs.CVcs.DCeess.SY ·2026-08-15 ·Liangkai Liu, Kang G. Shin
similarity 0.59
Abstract · 12 pages, 20 figures

Multimodal bird's-eye-view (BEV) perception combines LiDAR depth accuracy with dense camera semantics, but its high computational cost and imperfect sensing conditions make real-time deployment challenging. Existing methods largely compress individual detectors and overlook three opportunities: structured sparsity within camera and LiDAR inputs, timing misalignment between modalities, and the fact that many detected objects do not affect the planner's immediate action. We present MM-BEV, a real-time multimodal BEV system guided by a simple principle: compute where and when it matters. MM-BEV divides perception into mandatory work for safety-critical objects within braking distance of the ego vehicle and with short time-to-collision (TTC), and optional work for less urgent regions. It prioritizes mandatory work and reduces or sheds optional work under tight compute budgets. MM-BEV integrates four mechanisms: (1) a criticality-ranked temporal ROI selector based on motion-extrapolated detections from prior frames; (2) sparse, ROI-aware feature extraction using shared-shape camera crops at context-adaptive resolution and ROI-aware LiDAR voxelization; (3) a latency-aware coordinator that adapts LiDAR sweeps, image resolution, and keyframes according to scene dynamics and TTC; and (4) an asynchronous scheduler that decouples sensing from inference and skips stale frames. On nuScenes, MM-BEV reduces inference latency by 1.96x and end-to-end latency by 2.93x, with no loss in geometry-critical recall and only a 0.2 percentage-point drop in safety-critical recall. On a Clearpath Husky A300 equipped with an Ouster-128 LiDAR, BEV cameras, and a Jetson AGX Orin, MM-BEV further reduces mean latency by 2.11x, demonstrating its potential for real-world autonomous systems.

0.40

Robust Beam Prediction for V2X Networks with Multi-Modal Sensing

cs.LG ·2026-09-09 ·Chen Shang, Dinh Thai Hoang, Diep N. Nguyen, Jiadong Yu
published similarity 0.59
Abstract · 6 pages, 3 figures

Integrated sensing and communication (ISAC) provides a promising foundation for beam prediction in future vehicle-to-everything (V2X) networks. However, existing sensing-assisted beamforming methods still rely heavily on radio-frequency sensing, which may become unreliable in complex vehicular environments. Meanwhile, the growing availability of heterogeneous sensors, such as cameras and LiDAR, offers new opportunities to improve beam prediction through richer environmental perception. Motivated by this, this paper proposes a multi-modal beam prediction framework for V2X networks. Specifically, we develop BeamTransFuser, a hierarchical Transformer-based architecture that progressively fuses camera, LiDAR, radar, and GPS observations for robust beam prediction. In addition, to handle possible missing modalities in practical deployment, we introduce a generative module that reconstructs missing modality features from the available observations. Experimental results on a real-world multi-modal V2X dataset show that the proposed framework consistently outperforms representative baselines, while the generative module further improves robustness under incomplete sensing conditions.

0.32

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

cs.RO ·2026-10-03 ·Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee +5 more
published similarity 0.58
Abstract · 6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

0.23