CS Paper Radar

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee, Sungwoo Han, Jeongwoo Woo, Hyuntai Chin, Minha Park, Hyun Myung

cs.RO ·submitted 2026-10-03 14:35 UTC · v1
published

Abstract

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

Comment
6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.74
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22

Adversarial Robustness of Camera-Radar Sensor Fusion for Autonomous Driving

cs.CR cs.CV ·2026-10-12 ·Ce Zhou, Yubo Wu, Khang Nguyen, Liyang Xiao, Thomas Hou +1 more
similarity 0.70
Abstract · 25 pages

Autonomous driving (AD) relies on multi-sensor perception to interpret the surrounding environment. However, the robustness of camera--radar fusion under adversarial conditions remains largely unexplored. This paper presents a systematic measurement study of the robustness of camera--radar sensor fusion in AD. We construct a unified evaluation pipeline on the nuScenes dataset that simulates attacks on both sensing modalities, including eight camera-image perturbations and three radar point-cloud perturbations. We evaluate five camera--radar fusion algorithms across two perception tasks, 3D object detection and depth estimation, and quantify their performance under clean and attacked inputs using standard metrics. Our evaluation reveals a clear asymmetry in the robustness of fusion systems. Camera perturbations substantially degrade both object detection and depth estimation, and moderate attack strengths are already sufficient to cause severe performance degradation. In contrast, the evaluated radar perturbations produce smaller and task-dependent effects, with object-detection models showing particularly limited degradation. Our analysis attributes this difference to the strong dependence of existing fusion architectures on dense camera features, together with the filtering, association, and confidence-weighting mechanisms commonly applied to sparse radar measurements. These results demonstrate that sensor fusion does not inherently guarantee robustness and that the contribution and reliability of each sensing modality must be explicitly considered under adversarial conditions. Based on four empirical findings, we derive measurement-guided design implications for future robust camera--radar fusion, including modality-specific reliability estimation, cross-modal consistency checking, adaptive fusion, and graceful failover under severe sensor degradation.

0.15

Resilient Decentralized Radar-LiDAR-Inertial Odometry in Challenging Subterranean Environments

cs.RO ·2026-10-23 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulos
similarity 0.70
Abstract

Accurate localization in GPS-denied and visually degraded environments affected by smoke, dust, or fog remains a critical challenge for autonomous systems. While LiDAR provides high-resolution spatial perception, its performance deteriorates under particulate occlusion. In contrast, frequency-modulated continuous-wave (FMCW) radar offers robustness under such conditions but suffers from sparse measurements and outliers. This article presents a resilient decentralized LiDAR Radar Inertial Odometry (LRIO) framework that fuses the complementary strengths of LiDAR, radar, and inertial sensing to achieve robust pose estimation in challenging subterranean environments. At the core of the framework is an Adaptive Residual Thresholding (ART) mechanism that autonomously detects temporal sensor degradation and selectively adjusts the fusion process to minimize unreliable measurements. Building on this, a Robust Error-Tolerant Optimal Information Filter (RETOIF) is employed within a decentralized fusion architecture to integrate LiDAR-inertial and multiple radar-inertial odometry estimates in a fault-aware manner, enhancing resilience to environmental disturbances and intermittent sensor failures. The proposed framework is evaluated using real-world sensor data collected in GPS-denied subterranean tunnels under smoke-free and smoke-degraded conditions. In the smoke-free experiment, the proposed RETOIF framework achieves a root mean square localization error (RMSE) of 2.1733, compared with 2.9929 for the conventional centralized LRIO approach, corresponding to a 27.4\% reduction in RMSE. Experimental results further demonstrate the framework's ability to maintain pose estimation under smoke-induced sensor degradation, highlighting its potential for resilient autonomous navigation and mapping in challenging subterranean environments.

0.05

RbFT-Net: Rectify-Before-Fuse Temporal Radar Anchors for 4D Radar-Camera Depth Completion

cs.CV ·2026-08-13 ·Wentao Zhao, Shouxuan Wu, Yongtao Cen, Tianchen Deng, Yuyang Zhang +1 more
similarity 0.69
Abstract

Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.

0.04

Dr-LiSA: Direct Radar-Lidar Scan Alignment for SE(3) Localization

cs.RO ·2026-09-22 ·Alex Zhang, Daniil Lisus, Cedric Le Gentil, Timothy D. Barfoot
similarity 0.68
Abstract · 8 pages, 6 figures, paper under review

This paper introduces Dr-LiSA, a first-of-its-kind direct method for localizing 2D spinning radar intensity measurements in $SE(3)$ against 3D lidar maps. Radar-lidar localization combines the complementary strengths of the two sensing modalities: radar is robust to adverse weather and precipitation, while lidar provides high-fidelity 3D maps in favourable conditions. However, existing radar-lidar localization methods are restricted to planar $SE(2)$ localization and have generally fallen short of the accuracy achieved by lidar-lidar and even radar-radar systems. A key challenge is the substantial sensing-modality gap between radar and lidar, which observe and represent scene structure in fundamentally different ways. Dr-LiSA bridges this gap using a learned forward model that predicts radar measurements from a lidar submap at a candidate pose, enabling direct photometric alignment of predicted and observed radar scans in $SE(3)$. Dr-LiSA outperforms prior radar-lidar approaches in $SE(2)$ while achieving planar accuracy competitive with state-of-the-art radar-radar localization across more than 90 km of on-road data.

0.24

Camera Radar LiDAR Fusion via Point-Cloud Projection for Multi-Task Learning

cs.CV cs.AIcs.LG ·2026-11-02 ·Kavin Chandrasekaran, Sorin Grigorescu
hot direction similarity 0.68
Abstract · IEEE International Workshop on Signal Processing Systems 2026

Autonomous vehicles require robust perception systems to operate safely under diverse environmental conditions. While cameras provide high-resolution visual data, their performance significantly degrades in low-light and adverse weather. High Definition (HD) radar offers superior reliability and angular resolution under such conditions but lacks rich visual feature recognition. LiDAR, though expensive, delivers highly precise distance measurements and dense point clouds. Each sensor exhibits unique trade-offs, necessitating the development of advanced sensor fusion algorithms to harness complementary strengths while minimizing computational complexity and maintaining accuracy. In this study, the proposed fusion architecture performs early fusion by combining camera images with perspective-view point cloud data from HD radar and LiDAR sensors. The proposed model is trained to detect vehicles and segment free drivable space simultaneously. Experiments are performed on the RADIal dataset where we demonstrate that fusing point cloud data with camera images in front-view surpasses the performances of the most recent standalone and fusion models.

0.23

TRaIL-Odom: Tightly Coupled Continuous Time Radar-IMU-LiDAR Odometry with Adaptive Doppler Weighting

cs.RO ·2026-09-03 ·Chiyun Noh, Turcan Tuna, William Talbot, Marco Hutter, Laurent Kneip +1 more
top venuecode/data similarity 0.67
Abstract · Accepted for publication at the IEEE Robotics and Automation Letters on 23 August, 2026

Existing radar-LiDAR fusion methods rely on fixed residual weights, even though the informativeness of radar Doppler and LiDAR geometry is scan- and direction-dependent, leading to uniform radar weighting that misallocates Doppler information across translational directions. To address this limitation, we propose two degeneracy-aware Doppler reweighting modules within a tightly coupled Radar-IMU-LiDAR odometry framework: per-point radar reweighting and scan-wise radar gain scheduling. Since geometric degeneracy is directional, we first identify weak translational directions from the LiDAR geometry and reweight individual radar Doppler constraints based on their alignment with the weak subspace. We further adjust the overall radar contribution using LiDAR geometric anisotropy such that radar is emphasized when LiDAR observability is poor and suppressed when LiDAR constraints are already reliable. Across 13 evaluated sequences, TRaIL-Odom achieves state-of-the-art overall performance, with clear advantages in geometrically degenerate scenes. In ablation experiments on three degenerate sequences, combining the two adaptive weighting modules reduces RMSE ATE and RTE by 86.0% and 78.5% relative to the fixed-weight baseline. We make our code and an accompanying dataset publicly available at https://github.com/ChiyunNoh/TRaIL-Odom.

0.42

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.67
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30