CS Paper Radar

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

Richard Beuck, John Nguyen, Sudip Dhakal

cs.CV ·submitted 2026-11-03 04:30 UTC · v1
hot direction

Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

Closest papers

Nearest neighbours by meaning across the whole index.

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

cs.CV ·2026-08-29 ·Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates
similarity 0.75
Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

0.09

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

cs.RO ·2026-10-03 ·Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee +5 more
published similarity 0.74
Abstract · 6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

0.23

Camera Radar LiDAR Fusion via Point-Cloud Projection for Multi-Task Learning

cs.CV cs.AIcs.LG ·2026-11-02 ·Kavin Chandrasekaran, Sorin Grigorescu
hot direction similarity 0.73
Abstract · IEEE International Workshop on Signal Processing Systems 2026

Autonomous vehicles require robust perception systems to operate safely under diverse environmental conditions. While cameras provide high-resolution visual data, their performance significantly degrades in low-light and adverse weather. High Definition (HD) radar offers superior reliability and angular resolution under such conditions but lacks rich visual feature recognition. LiDAR, though expensive, delivers highly precise distance measurements and dense point clouds. Each sensor exhibits unique trade-offs, necessitating the development of advanced sensor fusion algorithms to harness complementary strengths while minimizing computational complexity and maintaining accuracy. In this study, the proposed fusion architecture performs early fusion by combining camera images with perspective-view point cloud data from HD radar and LiDAR sensors. The proposed model is trained to detect vehicles and segment free drivable space simultaneously. Experiments are performed on the RADIal dataset where we demonstrate that fusing point cloud data with camera images in front-view surpasses the performances of the most recent standalone and fusion models.

0.23

Adversarial Robustness of Camera-Radar Sensor Fusion for Autonomous Driving

cs.CR cs.CV ·2026-10-12 ·Ce Zhou, Yubo Wu, Khang Nguyen, Liyang Xiao, Thomas Hou +1 more
similarity 0.72
Abstract · 25 pages

Autonomous driving (AD) relies on multi-sensor perception to interpret the surrounding environment. However, the robustness of camera--radar fusion under adversarial conditions remains largely unexplored. This paper presents a systematic measurement study of the robustness of camera--radar sensor fusion in AD. We construct a unified evaluation pipeline on the nuScenes dataset that simulates attacks on both sensing modalities, including eight camera-image perturbations and three radar point-cloud perturbations. We evaluate five camera--radar fusion algorithms across two perception tasks, 3D object detection and depth estimation, and quantify their performance under clean and attacked inputs using standard metrics. Our evaluation reveals a clear asymmetry in the robustness of fusion systems. Camera perturbations substantially degrade both object detection and depth estimation, and moderate attack strengths are already sufficient to cause severe performance degradation. In contrast, the evaluated radar perturbations produce smaller and task-dependent effects, with object-detection models showing particularly limited degradation. Our analysis attributes this difference to the strong dependence of existing fusion architectures on dense camera features, together with the filtering, association, and confidence-weighting mechanisms commonly applied to sparse radar measurements. These results demonstrate that sensor fusion does not inherently guarantee robustness and that the contribution and reliability of each sensing modality must be explicitly considered under adversarial conditions. Based on four empirical findings, we derive measurement-guided design implications for future robust camera--radar fusion, including modality-specific reliability estimation, cross-modal consistency checking, adaptive fusion, and graceful failover under severe sensor degradation.

0.15

LiNO: Lightweight Network for Occupancy Estimation

cs.CV ·2026-11-10 ·Ruan Bispo, Tim Brophy, Reenu Mohandas, Anthony Scanlan, Ciaran Eising
similarity 0.71
Abstract · 13 pages / 6 figures / 10 tables

Occupancy estimation for automated vehicles is a crucial task that builds a 3D map using vehicle sensors. This map allows the vehicle to identify drivable areas and various obstacle classes. The task involves complex subtasks such as depth estimation, object classification, and segmentation to align semantic information with the 3D grid. Moreover, producing these estimations from multiple sensors demands significant computational power and memory, as high-dimensional data fusion requires complex feature extraction and processing. Consequently, most existing methods rely on large and computationally intensive architectures that are not suitable for real-time or real-world applications. We present a real-time, lightweight architecture that leverages camera and radar sensors through a residual multi-stage head. Unlike prior methods that rely on heavy camera-only blocks, our architecture employs camera-radar fusion and lightweight components. Additionally, we introduce a task-specific data augmentation strategy that enhances data diversity and improves generalisation. Our method achieves state-of-the-art (SOTA) performance, attaining 45.7 mean Intersection over Union (mIoU) on Occ3D and 41.9 Ray-level Intersection over Union (RayIoU) (41.9) on OpenOcc datasets, running at 17.2 frames per second (FPS) and using only 5.3 GB of memory, compared with 4.1 FPS and 7.7 GB for STCOcc.

0.24

AevaScenes: An FMCW LiDAR Dataset and Benchmark for Long-Range Perception

cs.CV cs.RO ·2026-09-27 ·Gautham Narayan Narasimhan, Heethesh Vhavle, Kumar Bhargav Viswanatha, James Reuther, Deva Ramanan
benchmarkdatasetcode/data similarity 0.70
Abstract · Project page: https://scenes.aeva.com

FMCW LiDAR measures per-point radial Doppler velocity alongside range, providing a motion cue unavailable in conventional time-of-flight sensors. Exploiting this signal at long range remains understudied. We present an FMCW LiDAR dataset of 575 sequences (57.5K frames) with over 8 million annotated 3D boxes across 16 detection classes and per-point labels across 24 semantic classes, captured by six commercial FMCW LiDAR sensors and six paired 4K cameras across eight Bay Area cities, including 237 nighttime sequences, with annotations extending to 400m. We define a benchmark with three tasks: 3D object detection, scene flow estimation, and semantic segmentation. Detection and scene flow are evaluated across three range bins to 400m, with a public evaluation server. We explore the impact of Doppler measurements on flagship recognition tasks, and find significant improvements up to 2X in detection AP of far-away vehicles and pedestrians, particularly in low-latency single-frame settings. We similarly find scene flow accuracy is significantly improved with Doppler measurements across all ranges. Our dataset and benchmark have been publicly released at https://scenes.aeva.com.

0.46

RbFT-Net: Rectify-Before-Fuse Temporal Radar Anchors for 4D Radar-Camera Depth Completion

cs.CV ·2026-08-13 ·Wentao Zhao, Shouxuan Wu, Yongtao Cen, Tianchen Deng, Yuyang Zhang +1 more
similarity 0.69
Abstract

Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.

0.04

Dr-LiSA: Direct Radar-Lidar Scan Alignment for SE(3) Localization

cs.RO ·2026-09-22 ·Alex Zhang, Daniil Lisus, Cedric Le Gentil, Timothy D. Barfoot
similarity 0.69
Abstract · 8 pages, 6 figures, paper under review

This paper introduces Dr-LiSA, a first-of-its-kind direct method for localizing 2D spinning radar intensity measurements in $SE(3)$ against 3D lidar maps. Radar-lidar localization combines the complementary strengths of the two sensing modalities: radar is robust to adverse weather and precipitation, while lidar provides high-fidelity 3D maps in favourable conditions. However, existing radar-lidar localization methods are restricted to planar $SE(2)$ localization and have generally fallen short of the accuracy achieved by lidar-lidar and even radar-radar systems. A key challenge is the substantial sensing-modality gap between radar and lidar, which observe and represent scene structure in fundamentally different ways. Dr-LiSA bridges this gap using a learned forward model that predicts radar measurements from a lidar submap at a candidate pose, enabling direct photometric alignment of predicted and observed radar scans in $SE(3)$. Dr-LiSA outperforms prior radar-lidar approaches in $SE(2)$ while achieving planar accuracy competitive with state-of-the-art radar-radar localization across more than 90 km of on-road data.

0.24