CS Paper Radar

RbFT-Net: Rectify-Before-Fuse Temporal Radar Anchors for 4D Radar-Camera Depth Completion

Wentao Zhao, Shouxuan Wu, Yongtao Cen, Tianchen Deng, Yuyang Zhang, Jingchuan Wang

cs.CV ·submitted 2026-08-13 11:26 UTC · v1

Abstract

Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.

Closest papers

Nearest neighbours by meaning across the whole index.

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

cs.CV ·2026-08-29 ·Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates
similarity 0.71
Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

0.09

4D Radar Perception Algorithms for Autonomous Driving: A Review

cs.RO cs.CVeess.SP ·2026-09-16 ·Xumin Wu, Jun Zhou, Jilin Mei, Chen Min, Yu Hu
similarity 0.69
Abstract · 12 pages, 9 figures, 5 tables. Submitted to IEEE Sensors Journal

Research on 4D millimeter-wave radar perception algorithms has flourished in recent years, extending from signal processing and object detection to semantic segmentation, motion estimation, occupancy prediction, and dynamic scene reconstruction. This review organizes the field according to the evolution of perception tasks and algorithms. It first introduces radar fundamentals, data representations, and quality-enhancement methods, and then reviews object-level perception, motion and localization, local and dense spatial perception, and dynamic scene understanding. Across these directions, we compare radar-only learning, multimodal fusion, and cross-modal supervision and knowledge distillation. Particular attention is paid to how elevation, Doppler measurements, and radar physical priors are exploited across tasks. We further summarize the task coverage, input data, annotations, and evaluation protocols of existing datasets, clarifying the empirical support for different research directions. Finally, we discuss the common challenges and future directions of 4D radar perception for autonomous driving. This review provides a task-oriented perspective on the transition from sparse object perception to dynamic spatial understanding.

0.18

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.69
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

cs.RO ·2026-10-03 ·Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee +5 more
published similarity 0.69
Abstract · 6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

0.23

Adversarial Robustness of Camera-Radar Sensor Fusion for Autonomous Driving

cs.CR cs.CV ·2026-10-12 ·Ce Zhou, Yubo Wu, Khang Nguyen, Liyang Xiao, Thomas Hou +1 more
similarity 0.67
Abstract · 25 pages

Autonomous driving (AD) relies on multi-sensor perception to interpret the surrounding environment. However, the robustness of camera--radar fusion under adversarial conditions remains largely unexplored. This paper presents a systematic measurement study of the robustness of camera--radar sensor fusion in AD. We construct a unified evaluation pipeline on the nuScenes dataset that simulates attacks on both sensing modalities, including eight camera-image perturbations and three radar point-cloud perturbations. We evaluate five camera--radar fusion algorithms across two perception tasks, 3D object detection and depth estimation, and quantify their performance under clean and attacked inputs using standard metrics. Our evaluation reveals a clear asymmetry in the robustness of fusion systems. Camera perturbations substantially degrade both object detection and depth estimation, and moderate attack strengths are already sufficient to cause severe performance degradation. In contrast, the evaluated radar perturbations produce smaller and task-dependent effects, with object-detection models showing particularly limited degradation. Our analysis attributes this difference to the strong dependence of existing fusion architectures on dense camera features, together with the filtering, association, and confidence-weighting mechanisms commonly applied to sparse radar measurements. These results demonstrate that sensor fusion does not inherently guarantee robustness and that the contribution and reliability of each sensing modality must be explicitly considered under adversarial conditions. Based on four empirical findings, we derive measurement-guided design implications for future robust camera--radar fusion, including modality-specific reliability estimation, cross-modal consistency checking, adaptive fusion, and graceful failover under severe sensor degradation.

0.15

Stereo 4D Radar for 3D Object Detection: Integrating Geometric Alignment and Absolute Velocity Estimation

cs.CV ·2026-09-02 ·Seung-Hyun Song, Dong-Hee Paek, Woong-Chan Byun, Seung-Hyun Kong
similarity 0.67
Abstract

Four-dimensional (4D) Radar is a powerful sensing modality capable of detecting surrounding three-dimensional (3D) objects under diverse weather conditions and providing Doppler-based motion information. However, raw 4D Radar signals contain significant clutter from road surfaces, guardrails, and surrounding vehicles, along with multipath-induced ghost reflections and the receiver's inherent noise floor. Consequently, preprocessing algorithms designed to remove such invalid measurements often make the Radar data excessively sparse. Moreover, the Doppler measurements provided by 4D Radar describe only the radial component of an object's velocity, limiting their ability to recover the full motion state. In this paper, we introduce a stereo 4D Radar-based 3D object detection framework that exploits the geometric disparity between left and right Radars to estimate the absolute velocity of objects and achieve more robust perception through the fusion of their complementary features. The effectiveness of the proposed framework is validated on our in-house stereo 4D Radar dataset, demonstrating performance gains of 8.82 points in AP 3D and 9.0 points in AP BEV over state-of-the-art mono 4D Radar baselines. These results demonstrate that absolute velocity estimation combined with stereo geometry-aware feature fusion leads to substantial improvements in 3D object detection.

0.31

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.66
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

GRADE: Single-Frame Generative Radar Depth Estimation Under Visual Degradation

cs.CV cs.RO ·2026-09-09 ·Bin Zhao, Patrick Chiou, Nakul Garg
top venuecode/data similarity 0.66
Abstract · To appear in ACM MobiCom 2026

Dense 3D depth perception fails under smoke, fog, and darkness because optical sensors cannot penetrate airborne particulates. mmWave radar remains usable and measures range accurately under these conditions, but its small aperture limits angular resolution. We present GRADE, which grounds a pretrained generative prior in single-frame radar geometry to estimate high-fidelity metric depth. GRADE first maps raw 4D radar spectra to coarse metric depth. A latent diffusion backbone then recovers structural detail while conditioning every denoising step on this estimate. A pixel-space adapter uses residual camera cues when available and is trained across clear, smoke-degraded, and occluded inputs so the full output approaches the radar-conditioned path as visibility degrades. Trained and evaluated on ~95K frames across 12 buildings with real smoke, GRADE achieves an MAE of 0.303 m in clear scenes and 0.313 m under smoke, outperforming existing baselines. Code and datasets are available at https://phi-lab-rice.github.io/GRADE.

0.72