CS Paper Radar

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates

cs.CV ·submitted 2026-08-29 11:08 UTC · v1

Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

Closest papers

Nearest neighbours by meaning across the whole index.

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.75
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22

Camera Radar LiDAR Fusion via Point-Cloud Projection for Multi-Task Learning

cs.CV cs.AIcs.LG ·2026-11-02 ·Kavin Chandrasekaran, Sorin Grigorescu
hot direction similarity 0.74
Abstract · IEEE International Workshop on Signal Processing Systems 2026

Autonomous vehicles require robust perception systems to operate safely under diverse environmental conditions. While cameras provide high-resolution visual data, their performance significantly degrades in low-light and adverse weather. High Definition (HD) radar offers superior reliability and angular resolution under such conditions but lacks rich visual feature recognition. LiDAR, though expensive, delivers highly precise distance measurements and dense point clouds. Each sensor exhibits unique trade-offs, necessitating the development of advanced sensor fusion algorithms to harness complementary strengths while minimizing computational complexity and maintaining accuracy. In this study, the proposed fusion architecture performs early fusion by combining camera images with perspective-view point cloud data from HD radar and LiDAR sensors. The proposed model is trained to detect vehicles and segment free drivable space simultaneously. Experiments are performed on the RADIal dataset where we demonstrate that fusing point cloud data with camera images in front-view surpasses the performances of the most recent standalone and fusion models.

0.23

LiNO: Lightweight Network for Occupancy Estimation

cs.CV ·2026-11-10 ·Ruan Bispo, Tim Brophy, Reenu Mohandas, Anthony Scanlan, Ciaran Eising
similarity 0.72
Abstract · 13 pages / 6 figures / 10 tables

Occupancy estimation for automated vehicles is a crucial task that builds a 3D map using vehicle sensors. This map allows the vehicle to identify drivable areas and various obstacle classes. The task involves complex subtasks such as depth estimation, object classification, and segmentation to align semantic information with the 3D grid. Moreover, producing these estimations from multiple sensors demands significant computational power and memory, as high-dimensional data fusion requires complex feature extraction and processing. Consequently, most existing methods rely on large and computationally intensive architectures that are not suitable for real-time or real-world applications. We present a real-time, lightweight architecture that leverages camera and radar sensors through a residual multi-stage head. Unlike prior methods that rely on heavy camera-only blocks, our architecture employs camera-radar fusion and lightweight components. Additionally, we introduce a task-specific data augmentation strategy that enhances data diversity and improves generalisation. Our method achieves state-of-the-art (SOTA) performance, attaining 45.7 mean Intersection over Union (mIoU) on Occ3D and 41.9 Ray-level Intersection over Union (RayIoU) (41.9) on OpenOcc datasets, running at 17.2 frames per second (FPS) and using only 5.3 GB of memory, compared with 4.1 FPS and 7.7 GB for STCOcc.

0.24

RbFT-Net: Rectify-Before-Fuse Temporal Radar Anchors for 4D Radar-Camera Depth Completion

cs.CV ·2026-08-13 ·Wentao Zhao, Shouxuan Wu, Yongtao Cen, Tianchen Deng, Yuyang Zhang +1 more
similarity 0.71
Abstract

Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.

0.04

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.71
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28

4D Radar Perception Algorithms for Autonomous Driving: A Review

cs.RO cs.CVeess.SP ·2026-09-16 ·Xumin Wu, Jun Zhou, Jilin Mei, Chen Min, Yu Hu
similarity 0.68
Abstract · 12 pages, 9 figures, 5 tables. Submitted to IEEE Sensors Journal

Research on 4D millimeter-wave radar perception algorithms has flourished in recent years, extending from signal processing and object detection to semantic segmentation, motion estimation, occupancy prediction, and dynamic scene reconstruction. This review organizes the field according to the evolution of perception tasks and algorithms. It first introduces radar fundamentals, data representations, and quality-enhancement methods, and then reviews object-level perception, motion and localization, local and dense spatial perception, and dynamic scene understanding. Across these directions, we compare radar-only learning, multimodal fusion, and cross-modal supervision and knowledge distillation. Particular attention is paid to how elevation, Doppler measurements, and radar physical priors are exploited across tasks. We further summarize the task coverage, input data, annotations, and evaluation protocols of existing datasets, clarifying the empirical support for different research directions. Finally, we discuss the common challenges and future directions of 4D radar perception for autonomous driving. This review provides a task-oriented perspective on the transition from sparse object perception to dynamic spatial understanding.

0.18

SARFusion: Scene-Aware Routing Fusion for Robust Camera-LiDAR 3D Object Detection

cs.CV cs.AI ·2026-09-24 ·Yuting Zhao, Ziyi Zheng, Shuxiao Li
similarity 0.68
Abstract

Camera-LiDAR fusion has become a prevailing paradigm for 3D object detection in autonomous driving. However, existing fusion detectors often establish strong inter-modality dependencies by decoding object queries from tightly coupled multimodal representations. Under corrupted driving conditions, such dependencies make the detector vulnerable to unreliable modalities, where degraded observations may interfere with reliable modality-specific evidence and lead to suboptimal predictions. Moreover, modality reliability can vary across both global driving scenes and individual object queries, requiring adaptive fusion decisions at a finer granularity. To bridge this gap, we reformulate robust camera-LiDAR fusion as a scene-aware branch routing problem and propose SARFusion, a robust 3D object detector. Instead of producing detections from a single fused representation, SARFusion decouples object-query decoding into three parallel reasoning branches: a camera branch, a LiDAR branch, and a camera-LiDAR fusion branch. Guided by a Scene Reliability Prior estimated from the global driving context, SARFusion further incorporates object-level evidence to route each query to the most suitable branch. This query-wise routing strategy alleviates harmful cross-modal interference while preserving the benefits of multimodal fusion when complementary cues are trustworthy. On the nuScenes test set, SARFusion achieves strong performance with 72.5 mAP and 74.4 NDS. Extensive analyses demonstrate its robustness under challenging conditions, including sensor corruptions and environmental changes.

0.15

RadarGSOcc: Doppler-Aware 3D Semantic Occupancy Prediction Using 4D Radar Tensor with Geometric-Semantic Feature Extraction

cs.CV cs.AIcs.RO ·2026-10-13 ·Christofel Rio Goenawan, Dong-Hee Paek, Seung-Hyun Kong
benchmark similarity 0.68
Abstract

3D semantic occupancy prediction is crucial for autonomous driving, but camera-based methods degrade in low-light conditions and LiDAR-based methods are sensitive to adverse weather. 4D radar is more robust, yet its sparsity and the high cost of radar tensor processing limit its use. We propose Radar Geometric-Semantic Occupancy Prediction (RadarGSOcc), an efficient framework that directly processes 4D radar tensors by separately extracting geometric and semantic features, including Doppler information, with a deformable attention-based geometric refinement module as its key component. We also introduce the K-Radar 3DSemOcc benchmark, the first large-scale benchmark for 3D semantic occupancy prediction using 4D radar tensors, built on the K-Radar dataset with refined LiDAR-based annotations. RadarGSOcc predicts 15 classes within a 51.2m range and achieves 38.2% IoU, 7.6% mIoU, and 25.5% weighted mIoU, outperforming RadarOcc by 17% relative (25.5 vs. 21.9) in weighted mIoU while using fewer parameters and lower computation. It substantially improves truck prediction while trading off car accuracy, outperforms camera-based approaches, and narrows the gap with LiDAR-based methods. To assess robustness without per-frame ground truth in adverse weather, we further propose a novel proxy metric, Environment-Based KL Divergence (EBKL), under which 4D radar proves a reliable and efficient modality for 3D semantic occupancy prediction. The dataset and code will be publicly available.

0.14