CS Paper Radar

TRaIL-Odom: Tightly Coupled Continuous Time Radar-IMU-LiDAR Odometry with Adaptive Doppler Weighting

Chiyun Noh, Turcan Tuna, William Talbot, Marco Hutter, Laurent Kneip, Ayoung Kim

cs.RO ·submitted 2026-09-03 09:00 UTC · v1
top venuecode/data

Abstract

Existing radar-LiDAR fusion methods rely on fixed residual weights, even though the informativeness of radar Doppler and LiDAR geometry is scan- and direction-dependent, leading to uniform radar weighting that misallocates Doppler information across translational directions. To address this limitation, we propose two degeneracy-aware Doppler reweighting modules within a tightly coupled Radar-IMU-LiDAR odometry framework: per-point radar reweighting and scan-wise radar gain scheduling. Since geometric degeneracy is directional, we first identify weak translational directions from the LiDAR geometry and reweight individual radar Doppler constraints based on their alignment with the weak subspace. We further adjust the overall radar contribution using LiDAR geometric anisotropy such that radar is emphasized when LiDAR observability is poor and suppressed when LiDAR constraints are already reliable. Across 13 evaluated sequences, TRaIL-Odom achieves state-of-the-art overall performance, with clear advantages in geometrically degenerate scenes. In ablation experiments on three degenerate sequences, combining the two adaptive weighting modules reduces RMSE ATE and RTE by 86.0% and 78.5% relative to the fixed-weight baseline. We make our code and an accompanying dataset publicly available at https://github.com/ChiyunNoh/TRaIL-Odom.

Comment
Accepted for publication at the IEEE Robotics and Automation Letters on 23 August, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Resilient Decentralized Radar-LiDAR-Inertial Odometry in Challenging Subterranean Environments

cs.RO ·2026-10-23 ·Moumita Mukherjee, Avijit Banerjee, Anton Koval, George Nikolakopoulos
similarity 0.70
Abstract

Accurate localization in GPS-denied and visually degraded environments affected by smoke, dust, or fog remains a critical challenge for autonomous systems. While LiDAR provides high-resolution spatial perception, its performance deteriorates under particulate occlusion. In contrast, frequency-modulated continuous-wave (FMCW) radar offers robustness under such conditions but suffers from sparse measurements and outliers. This article presents a resilient decentralized LiDAR Radar Inertial Odometry (LRIO) framework that fuses the complementary strengths of LiDAR, radar, and inertial sensing to achieve robust pose estimation in challenging subterranean environments. At the core of the framework is an Adaptive Residual Thresholding (ART) mechanism that autonomously detects temporal sensor degradation and selectively adjusts the fusion process to minimize unreliable measurements. Building on this, a Robust Error-Tolerant Optimal Information Filter (RETOIF) is employed within a decentralized fusion architecture to integrate LiDAR-inertial and multiple radar-inertial odometry estimates in a fault-aware manner, enhancing resilience to environmental disturbances and intermittent sensor failures. The proposed framework is evaluated using real-world sensor data collected in GPS-denied subterranean tunnels under smoke-free and smoke-degraded conditions. In the smoke-free experiment, the proposed RETOIF framework achieves a root mean square localization error (RMSE) of 2.1733, compared with 2.9929 for the conventional centralized LRIO approach, corresponding to a 27.4\% reduction in RMSE. Experimental results further demonstrate the framework's ability to maintain pose estimation under smoke-induced sensor degradation, highlighting its potential for resilient autonomous navigation and mapping in challenging subterranean environments.

0.05

FMCW-LIO: A Doppler LiDAR-Inertial Odometry

cs.RO cs.CVeess.SY ·2026-09-24 ·Mingle Zhao, Jiahao Wang, Tianxiao Gao, Chengzhong Xu, Hui Kong
top venuecode/datahighly cited similarity 0.69
Abstract · IEEE Robotics and Automation Letters (RA-L), 2024. Project Page: https://github.com/IMRL/FMCW-LIO

Conventional LiDAR-inertial odometry (LIO) or simultaneous localization and mapping (SLAM) methods heavily rely on geometric features of environments, as LiDARs primarily provide range measurements instead of motion measurements. From now on, however, the situation changes thanks to the novel Frequency Modulated Continuous Wave (FMCW) Doppler LiDARs. FMCW Doppler LiDARs not only offer the point range with high resolution but also capture the instant point Doppler velocity through the Doppler effect. In the letter, we propose FMCW-LIO, a novel and robust LIO, leveraging intrinsic Doppler measurements from FMCW Doppler LiDARs. To correctly exploit Doppler velocities, a motion compensation method is designed, and a Doppler-aided observation model is applied for on-manifold state estimation. Then, dynamic points can be effectively removed by the Doppler criteria, deriving more consistent geometric observations. FMCW-LIO eventually achieves accurate state estimation and static mapping, even in structure-degenerated environments. Extensive experiments in diverse scenes are performed and FMCW-LIO outperforms other algorithms on both accuracy and robustness.

0.78

FIRE-LIVWO: Robust LiDAR-Inertial-Visual-Wheel Odometry via Failure-Immune mmWave Radar Enhancement

cs.RO ·2026-09-04 ·Kun Hu, Menggang Li, Kaidi Wu, Zhiwen Jin, Yingjie Zhao +3 more
publishedcode/data similarity 0.69
Abstract · Accepted by IROS 2026.The project website is "https://kj-falloutlast.github.io/FIRE-LIVWO"

Achieving robust SLAM in large-scale underground coal mines with complex structures and severe degeneracies remains highly challenging. Dense smoke and dust cause substantial loss of visual information and degrade LiDAR point-cloud features, while long, self-similar corridors induce geometric degeneration, leading to pronounced odometry drift. To address these issues, we propose FIRE-LIVWO: Failure-Immune mmWave Radar-Enhanced LiDAR-Inertial-Visual-Wheel Odometry, a tightly coupled multi-modal odometry framework based on an iterated error-state Kalman filter (IESKF). The framework fuses 4D mmWave radar, LiDAR, and visual features within a unified VoxelMap and jointly constructs LiDAR-radar point-to-plane residuals and sparse visual photometric residuals. In smoke-filled environments, we exploit the strong penetration of 4D mmWave radar and introduce pointwise Doppler velocity constraints to preserve state observability. In geometrically degenerate corridors, we tightly couple wheel odometry using non-holonomic constraints (NHC) and online lever-arm compensation to reduce drift. Our central contribution is a degeneration detection and adaptive fusion model switching strategy grounded in geometric and visual observability analysis, which quantifies observability online and dynamically adjusts modality weights. Real-world experiments in underground coal mines demonstrate that FIRE-LIVWO accurately identifies failure boundaries, enabling reliable modality switching under extreme conditions. Compared with baselines, it achieves superior accuracy and robustness (average localization error of 5.677m). We open source our code on Github to benefit the robotics community.

0.41

Dr-LiSA: Direct Radar-Lidar Scan Alignment for SE(3) Localization

cs.RO ·2026-09-22 ·Alex Zhang, Daniil Lisus, Cedric Le Gentil, Timothy D. Barfoot
similarity 0.69
Abstract · 8 pages, 6 figures, paper under review

This paper introduces Dr-LiSA, a first-of-its-kind direct method for localizing 2D spinning radar intensity measurements in $SE(3)$ against 3D lidar maps. Radar-lidar localization combines the complementary strengths of the two sensing modalities: radar is robust to adverse weather and precipitation, while lidar provides high-fidelity 3D maps in favourable conditions. However, existing radar-lidar localization methods are restricted to planar $SE(2)$ localization and have generally fallen short of the accuracy achieved by lidar-lidar and even radar-radar systems. A key challenge is the substantial sensing-modality gap between radar and lidar, which observe and represent scene structure in fundamentally different ways. Dr-LiSA bridges this gap using a learned forward model that predicts radar measurements from a lidar submap at a candidate pose, enabling direct photometric alignment of predicted and observed radar scans in $SE(3)$. Dr-LiSA outperforms prior radar-lidar approaches in $SE(2)$ while achieving planar accuracy competitive with state-of-the-art radar-radar localization across more than 90 km of on-road data.

0.24

Online Target-less Radar-LiDAR-Camera Extrinsic Calibration via Joint Optimization

cs.RO ·2026-10-03 ·Gunhee Shin, Yunsoo Kim, Chanhyuk Lee, Wanhee Kim, Minwoo Lee +5 more
published similarity 0.67
Abstract · 6 pages, 2 figures, 3 tables. Accepted to the International Conference on Control, Automation and Systems (ICCAS 2026)

Fusing radar, LiDAR, and camera enables robust perception in diverse and adverse conditions, but the fusion performance critically depends on accurate extrinsic calibration among the three sensors. In this paper, we address the problem of online target-less extrinsic calibration for the radar-LiDAR-camera system. Existing target-less methods are mostly designed for a single sensor pair, and composing the pairwise results does not guarantee consistency across the three sensors. Moreover, the sparse and noisy radar measurements make the radar-involving pairs unreliable. To tackle these challenges, we propose a joint calibration framework that constructs residuals for each sensor pair and optimizes the extrinsics of all pairs together to minimize the overall residual. Furthermore, we introduce an adaptive radar noise filter that rejects spurious radar returns using a range-dependent margin, and a correspondence accumulation strategy that aggregates sparse radar correspondences over frames. We validate our method on an in-house radar-LiDAR-camera dataset covering diverse urban environments, where it reduces calibration errors across all sensor pairs over a state-of-the-art camera-LiDAR baseline.

0.23

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

cs.CV ·2026-08-29 ·Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates
similarity 0.67
Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

0.09

RadarGSOcc: Doppler-Aware 3D Semantic Occupancy Prediction Using 4D Radar Tensor with Geometric-Semantic Feature Extraction

cs.CV cs.AIcs.RO ·2026-10-13 ·Christofel Rio Goenawan, Dong-Hee Paek, Seung-Hyun Kong
benchmark similarity 0.66
Abstract

3D semantic occupancy prediction is crucial for autonomous driving, but camera-based methods degrade in low-light conditions and LiDAR-based methods are sensitive to adverse weather. 4D radar is more robust, yet its sparsity and the high cost of radar tensor processing limit its use. We propose Radar Geometric-Semantic Occupancy Prediction (RadarGSOcc), an efficient framework that directly processes 4D radar tensors by separately extracting geometric and semantic features, including Doppler information, with a deformable attention-based geometric refinement module as its key component. We also introduce the K-Radar 3DSemOcc benchmark, the first large-scale benchmark for 3D semantic occupancy prediction using 4D radar tensors, built on the K-Radar dataset with refined LiDAR-based annotations. RadarGSOcc predicts 15 classes within a 51.2m range and achieves 38.2% IoU, 7.6% mIoU, and 25.5% weighted mIoU, outperforming RadarOcc by 17% relative (25.5 vs. 21.9) in weighted mIoU while using fewer parameters and lower computation. It substantially improves truck prediction while trading off car accuracy, outperforms camera-based approaches, and narrows the gap with LiDAR-based methods. To assess robustness without per-frame ground truth in adverse weather, we further propose a novel proxy metric, Environment-Based KL Divergence (EBKL), under which 4D radar proves a reliable and efficient modality for 3D semantic occupancy prediction. The dataset and code will be publicly available.

0.14

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.65
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22