CS Paper Radar

Robust Well-Log Reconstruction Across Point Gaps and Whole Wells via Boundary-Gated Soft-Thresholding Kalman Fusion

Yongan Zhang, Zhihan Qiu, Yizheng Li, Youzhuang Sun

cs.LG cs.AI ·submitted 2026-11-14 21:17 UTC · v1

Abstract

Missing wireline logs hinder subsurface characterization. Deep reconstruction networks suffer from gap-boundary steps and cross-basin shifts, while interpolation and Gaussian smoothers struggle with long intervals and outliers. We propose boundary-gated soft-thresholding Kalman fusion (ST-KF), unifying multiresolution wavelet shrinkage, distance-gated residual prior learning, and closed-form robust Kalman smoothing with learning--inference decoupling. Across two public benchmarks totaling 263 wells in the Norwegian North Sea and New Zealand's Taranaki Basin, ST-KF ranks first over 0.15--100-m anchored gaps with 0.09% parameter overhead. Against the strongest of nine baselines, pooled RMSE falls by 5.0%--8.3% for bulk density and 6.4%--15.6% for compressional slowness; against the four strongest baselines, reductions are 0.7%--4.1% for neutron porosity and 1.3%--2.9% for photoelectric factor. Ablations and sensitivity analyses confirm operator synergy and stable performance: removing state-space fusion increases short-gap errors by up to 58.8%, while zero-shot transfer cuts anchored errors by 14%--68%. The results show that local borehole continuity transfers across basins whereas cross-property mappings shift with regional geology, supporting measurement-guided log reconstruction.

Comment
17 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Well-Log Reconstruction with Pre-trained Geological Knowledge: A Knowledge-Conditioned Large-Language-Model Generative Agent

cs.LG cs.AI ·2026-11-14 ·Yongan Zhang, Yitao Yu, Yizheng Li, An Gong, Youzhuang Sun
benchmark similarity 0.58
Abstract · 35 pages

Missing well-log intervals make subsurface reconstruction ill-posed. Existing numerical regression models lack geological prior knowledge to constrain ambiguous inverse mappings. We propose GeoLog-Agent, a knowledge-conditioned generative agent using pre-trained large language models (LLMs) as a source of geological priors. A universal Geo-Harness translates LLM stratigraphic reasoning into formation-anchored petrophysical trajectories, feature-wise linear modulation, and conditional adversarial constraints. On the Norwegian North Sea benchmark, GeoLog-Agent achieves a mean $R^2$ of 0.9307 and a peak $R^2$ of 0.9713. It exceeds the nine-baseline average $R^2$ of 0.8387 by 0.0920, with a 30.97% average RMSE reduction, and exceeds the strongest baseline by 0.0274--0.0498 in $R^2$, with 16.25%--24.05% lower RMSE. Ablations confirm the effectiveness and synergy of geological prior reasoning, multi-scale dilated generation, and conditional adversarial modules. Transferring the coupling mechanism to six conventional deep learning models improves their $R^2$ by 0.0162--0.0789 with cross-well stability. These results demonstrate how foundation-model domain reasoning can constrain deep generative reconstruction of missing petrophysical measurements.

0.26

Structure-aware Bayesian full waveform inversion via diffusion-regularized Stein variational gradient descent

cs.LG stat.MLphysics.geo-ph ·2026-10-13 ·Chao Li, Mrinal K. Sen, Sergey Fomel, Yangkang Chen
similarity 0.57
Abstract

Full waveform inversion (FWI) is a powerful tool for high-resolution subsurface model reconstruction, but it remains highly nonlinear and ill-posed, especially when the initial model is inaccurate or the acquired data are noisy and incomplete. Annealed Stein variational gradient descent (ASVGD) provides a particle-based Bayesian framework for FWI by approximating the posterior distribution with an ensemble of velocity models, thereby enabling uncertainty quantification beyond a single deterministic solution. However, conventional ASVGD-FWI commonly relies on simple handcrafted priors, such as Gaussian or smoothing assumptions, which are often insufficient to represent complex geological structures. To address this limitation, we introduce a learned diffusion model (DM) as an implicit regularization mechanism within the ASVGD-FWI framework. Instead of explicitly evaluating the diffusion prior density, the trained diffusion model acts as a learned geological projection operator that guides updated particles toward the distribution of plausible velocity models. In this way, the proposed method combines data consistency from FWI, posterior diversity from ASVGD, and structural realism from the diffusion prior. Numerical experiments demonstrate that the diffusion-regularized ASVGD-FWI produces more geologically consistent mean models, suppresses nonphysical artifacts, and yields uncertainty estimates that are more concentrated around structurally complex and poorly constrained regions. These results suggest that learned diffusion priors can effectively enhance Bayesian FWI by improving both inversion stability and the interpretability of posterior uncertainty.

0.03

An AI-assisted conditioning and geological interpretation workflow for usage in implicit geological modeling

cs.AI physics.geo-phcs.LG ·2026-10-07 ·Stefan Carpentier, Jan Diederik van Wees, Eva de Boever, Jan Niederau, Camille Chapeland +3 more
similarity 0.57
Abstract · 17 page, 19 figures

Implicit modeling and Relative Geologic Time are geological modeling techniques that enable more efficient, faster, less biased and more reproducible modeling results. For optimal operation, these techniques require many well-constrained input data. In the framework of the Horizon Europe GO-Forward and MOOI WarmingUP GOO projects and to accelerate Implicit modeling, Machine Learning (ML) methods have been tested and implemented in a toolkit for the interpretation of (onshore) seismic data from the shallow to deep range (+- 300 - 3500 m). The goal is to rapidly characterise this depth domain by efficient interpretation of horizons and faults in seismic data. The first step is to improve the signal by applying AI techniques like self-supervised and semi-supervised contrastive learning CNN's for noise reduction and interpolation. Next, horizons and faults are interpreted with minimal use of human-generated training data by using (semi-) self-supervised methods. The resulting developed toolkit supports the application of the implemented algorithms in an efficient workflow. As a first demonstration, the top of the Dutch Maassluis Formation has been interpreted in the Leeuwarden and Waalwijk 3D seismic cubes. Overall, this study demonstrates that AI-assisted interpretation workflows have reached a level of maturity that allows their integration into applied geological modeling and decision-making.

0.22

Physical Cross-Modal Masked Autoencoding for Seismic-to-Well Representation Learning

cs.LG physics.geo-ph ·2026-09-28 ·Meher Gajula, Keyla Gonzalez, Ben Lasscock, Alejandro Valenciano
similarity 0.55
Abstract · 11 pages, 3 figures

Learning from scientific measurements often requires aligning modalities with different spatial support and resolution. Subsurface characterization is an extreme dense-sparse problem in which 3D seismic provides volumetric but indirect measurements and well logs provide high-resolution 1D measurements at sparse borehole locations. We introduce a physically grounded cross-modal masked autoencoder (CM-MAE) for seismic-to-well representation learning. The model jointly tokenizes seismic volumes and well-log depth patches, embeds both modalities in continuous physical coordinates using four-axis rotary position embeddings, and reconstructs masked targets with a cross-modal decoder. Sparse Mixture-of-Experts layers provide modality-specific capacity while dense attention allows information exchange between modalities. Pretraining uses 23 seismic volumes covering approximately 178,000 square km across U.S. offshore and onshore basins, together with approximately 92,000 wells. Matched-mask ablations show strongly asymmetric information flow. Seismic context improves held-out well-log reconstruction by 9.73%, while well-log context improves seismic reconstruction by 0.65%. We evaluate seismic-only pseudo-log predictions against independent interpreter-drawn salt-geobody masks to determine whether they contain geologic signal. Across offshore U.S. surveys, compressional-slowness-derived salt scores reach an AUROC of 0.910. In onshore basins, predicted compressional slowness preserves formation-scale structure and partial relative organization in an unseen survey despite calibration drift. CM-MAE learns useful seismic-to-well representations under extreme modality asymmetry, although absolute pseudo-log calibration remains survey-dependent.

0.21

Efficient Continuous DEM Reconstruction under Limited Target-Resolution Supervision

cs.CV cs.LGeess.IV ·2026-09-24 ·Zekai Shi, Meng Zhang, Haokun Zhang, Bo Zhang
similarity 0.55
Abstract · 19 pages, 15 figures

High-resolution digital elevation models (DEMs) support Earth observation applications, but paired training references are often available only at coarser output resolutions. Reconstructing finer terrain grids therefore requires both effective transfer beyond the supervised scale and control of dense-query computation. To address this problem, SCOPE learns a continuous terrain representation from coarser-resolution pairs. It predicts a latent coefficient field on the low-resolution grid and reuses local Fourier residual functions through basis evaluation and geometry-guided ensemble fusion. This separates high-dimensional coefficient prediction from output-grid construction. Experiments on geographically distributed land--ocean samples assess supervised reconstruction, unseen-scale inference, cross-domain generalization, and theoretical computation. SCOPE leads the compared methods across six metrics in the main supervised-scale evaluation. At an unseen factor three times the training factor, land reconstruction reduces RMSE and MAE by approximately 12\% relative to bicubic interpolation, with errors close to target-scale fine-tuning. Ninefold output density increases counted multiply--accumulate operations by only about 2\%. Frozen-model validation on held-out external marine regions reduces RMSE relative to the DEM-specific implicit baseline EBCF-CDEM by approximately 19\% under self-downsampling and 2\% with cross-product inputs, while also yielding lower RMSE than LIIF-MS in both settings. These results demonstrate the value of reusable coefficient fields for accurate reconstruction beyond the supervised resolution with low incremental arithmetic cost.

0.22

Taking a Second Look: Correcting Sea Ice Forecasts with Sparse Observations

cs.LG ·2026-09-21 ·Tianshuo Zhang, Xianglei Xing, Aowen Yang, Jia Gao, Wenzhe Zhai +2 more
code/data similarity 0.53
Abstract · Added a co-author and updated the manuscript

Sea ice forecasts are issued several days ahead, allowing errors to accumulate while new, often sparse sea ice concentration (SIC) observations become available. We find that fixed-propagation errors concentrate near structured, high-gradient ice edges, whereas homogeneous interiors require limited propagation, suggesting that propagation distance should be state dependent. We therefore introduce ECHO (Evidence-guided Correction with Heterogeneous prOpagation), where ECHO-Scale adapts propagation distance while preserving correction geometry, and ECHO-Delta learns a bounded residual around fixed propagation. Across all 96 standard evaluation settings spanning diverse priors, observation times, sparsity levels, geometries, and noise conditions, both outperform fixed propagation. ECHO-Delta achieves the best average accuracy, while ECHO-Scale is more robust to geometry shifts. Code is available at https://github.com/yingtian22/TAKING-A-SECOND-LOOK.

0.41

Fault-tolerant shallow recurrent decoders for sparse sensing with missing sensor measurements

cs.LG cs.AI ·2026-11-03 ·Matteo Romilio Pasqual, Matteo Tomasetto, J. Nathan Kutz, Andrea Manzoni
benchmark similarity 0.52
Abstract

Real-world sensing systems are inherently imperfect: sensors may fail, intermittently disconnect, operate with asynchronous sampling rates, and be subject to noise, leading to measurement streams that are irregular, incomplete, and heterogeneous. Nevertheless, sensing strategies for real-time state reconstruction typically assume synchronous and continuously active sensors, a constraint that substantially limits their applicability in operational environments. In this work, we introduce fault-tolerant sparse sensing strategies in the context of shallow recurrent decoders (SHRED) to enable high-dimensional state estimation from sparse, asynchronous, and missing sensor measurements. Specifically, we consider naive imputation strategies, fault-tolerant recurrent temporal encoders, and we introduce four different transformer-based masking mechanisms to make SHRED explicitly aware of sensor availability through the binary data-availability mask. Moreover, we further introduce a multi-step decoding training objective for SHRED, resulting in smoother latent trajectories and more robust predictions. Throughout a synthetic benchmark and three real-world problems in hydrodynamic and ocean modeling, we show that (i) transformer-based masking mechanisms outperform standard imputation techniques and fault-tolerant recurrent architectures, (ii) the multi-step decoding training objective enhances reconstruction fidelity and robustness in the presence of heterogeneous missing-data patterns, while (iii) the computational efficiency of SHRED is preserved, with no additional inference-time overhead.

0.20

Autoregressive Drillhole Modelling Under Distribution Shift

cs.LG ·2026-10-01 ·Yihao Ding, Daniel Yitian Su, Yiran Zhang, Christopher M. Gonzalez, Wei Liu
benchmarkcode/data similarity 0.51
Abstract · work in progress

Autoregressive modelling has achieved remarkable success in language and sequence tasks by learning to predict future states from previous observation. Mineral-exploration drillholes provide a natural but largely unexplored setting for this paradigm: as drilling proceeds, lithology is revealed sequentially from shallow to deep, making prediction of deeper strata inherently autoregressive. Existing drillhole modelling, however, is dominated by spatial interpolation and reconstruction, or largely rely on masked modelling, leaving strictly autoregressive prediction largely underexplored. We introduce DrillBench, a benchmark of 49,671 Western Australian drillholes for next-layer prediction and autoregressive stratigraphic generation across a graded transfer spectrum, from local prediction through spatial shift to cross geological province transfer. Benchmarking classical, geostatistical, and neural models reveals a clear \emph{transfer boundary}: spatial and geochemical conditioning provides large local gains but deteriorates sharply under stronger shift, whereas lithology-sequence autoregressive models transfer more robustly. Guided by this finding, we develop a backbone-agnostic recipe combining large-scale pretraining on historical drillholes with spatial retrieval of neighbouring lithology. Retrieval is most effective in weathered cover, when local spatial continuity remains informative, whereas pretraining contributes more strongly in bedrock and under broader geological shift. Together, they retain strong local performance while improving generalisation under spatial and cross-province shift, most markedly on the most distant splits. The benchmark and code are available at https://github.com/yihaoding/drillbench.

0.33