CS Paper Radar

EasyNav: A Modular Architecture for Real-Time Navigation Across Heterogeneous Robot Environments

Francisco Martín Rico, Francisco Miguel Moreno, Juan Sebastián Cely Gutiérrez, Esther Aguado, Miguel Ángel De Miguel Paraíso, José Miguel Guerrero

cs.RO ·submitted 2026-11-15 09:17 UTC · v1
code/data

Abstract

Most robot navigation stacks implicitly bind mapping, localization, planning, and control to specific representations and data flows, yielding architectures hard to extend, compare experimentally, or reason about end-to-end timing. This is critical in heterogeneous scenarios, where multiple spatial representations, sensing modalities, and coordinate frames coexist and evolve at different rates. This paper presents a navigation architecture centered on an explicit, shared navigation state that serves as the sole interaction interface between modular components. Constraining mapping, localization, planning, and control to operate over this shared state enables interchangeable, representation-agnostic pipelines under explicit compatibility and timing contracts. We realize this architecture as EasyNav, an open source ROS 2 framework, and validate it through real-robot experiments, including indoor navigation with laser sensing and large-scale indoor-outdoor navigation with GPS and 3D LiDAR across multi-level routes. Compared with Nav2 under matched conditions, EasyNav reduces reaction latency from 377 to 33 ms indoors and from 71 to 8 ms outdoors, while also using less CPU and memory.

Comment
9 pages, 4 figures, 3 tables. Code: https://github.com/EasyNavigation

Closest papers

Nearest neighbours by meaning across the whole index.

I2O2I-Nav: A Benchmark with a Modular Agent for Long-Horizon Indoor-to-Outdoor-to-Indoor Navigation

cs.RO ·2026-10-13 ·Zhengjie Shu, Wanyu Li, Di Xiao, Lingxin Jiang, Lai Jiang +9 more
benchmarkcode/data similarity 0.71
Abstract · 28 pages. Project page: https://i2o2i-nav.github.io/

Service and delivery robots often need to complete long-horizon navigation missions spanning indoor and outdoor environments. Existing embodied navigation benchmarks primarily evaluate isolated stages or partial cross-domain journeys, providing limited support for assessing how heterogeneous navigation capabilities compose under continuous execution. We introduce I2O2I-Nav, a physics-enabled benchmark of 20 real-world composite scenes spanning over 115,000 square meters across multiple buildings and floors, with aligned 3DGS rendering and collision geometry. Its three-level evaluation progresses from independent primitives to two-stage compositions and complete four-stage I2O2I missions. Each stage starts from its predecessor's actual endpoint, while stage-conditional metrics track completion and localize failures along the mission. We further propose the MODULAR-Agent that coordinates frozen navigation policies through completion verification, stage handoffs, and bounded recovery. Evaluation across 1,374 episodes highlights the difficulty of continuous composition. The MODULAR-Agent achieves 40.5-76% success on individual primitives, but full I2O2I success remains low. Compared with a fixed policy chain using the same underlying policies, it more than doubles success on both Indoor-to-Outdoor (I2O) and Outdoor-to-Indoor (O2I), while improving full-mission success from 1.15% to 4.02%. Stage-wise analysis shows that the MODULAR-Agent enables more missions to reach the final object-navigation stage, where conditional success remains low, revealing challenges in both long-horizon stage execution and completion decisions.

0.39

RTNav: Towards Real-Time Zero-Shot Object Navigation

cs.RO cs.AIcs.CV ·2026-08-27 ·Easop Lee, Lingyu Zhang, Boyuan Chen
similarity 0.67
Abstract

Navigation in unknown environments to find unforeseen objects has become increasingly feasible with capable vision and language foundation models. However, these models also introduce non-negligible inference latency, which becomes an important concern when agents must operate continuously in the real world. Most state-of-the-art methods are still developed in synchronous simulators, where the environment waits for the agent to act and inference time is effectively free. As a result, agents are often designed around the sequential execution of perception, reasoning, and action, with little regard for time constraints. Under real-time execution, where wall-clock time counts towards the task budget, the inefficiencies of these architectures become clear. We show that recent zero-shot object navigation methods suffer consistent performance degradation under such realistic timing conditions. Motivated by this observation, we propose RTNav, a simple but effective architecture that treats inference latency, asynchronous environment stepping, and bounded compute as explicit design considerations. Evaluated on real-time variants of HM3D-v1, HM3D-v2, and HM3D-OVON, RTNav improves the success rate by up to 11% and the Success weighted by Completion Time by up to 5.1 points over prior work.

0.20

Navi-Agent: Unlocalized Monocular Navigation Agent

cs.RO cs.CV ·2026-09-17 ·Wenyuan Xie, Mengyang Hong, Yongzhong Wang, Yanbiao Ji, Yijin Zhou +7 more
benchmark similarity 0.66
Abstract · 8 pages, 7 figures

Vision-Language Navigation in Continuous Environments (VLN-CE) requires an embodied agent to execute long-horizon instructions in unknown environments. Existing zero-shot VLN-CE systems typically maintain spatial states through geometric localization or coordinate-based representations. Recent geometry-constrained navigation removes depth and globally consistent coordinates, but maintaining persistent spatial awareness for place confirmation, progress verification, and recovery remains challenging. We present Navi-Agent, a zero-shot VLN-CE agent that constructs a coordinate-free spatial state from visual observations and executed motion histories. Navi-Agent organizes this state as a navigation topology, where nodes represent visual places and edges represent motion transitions. This representation enables observation-based approximate self-localization, task progress verification, and visual revisitation-based recovery. Navi-Agent performs closed-loop navigation by decomposing instructions into sub-goals, executing local visual navigation, and verifying visited places through the constructed spatial state. Experiments on zero-shot VLN-CE benchmark and real-world robot platforms show that Navi-Agent achieves state-of-the-art performance among geometry-constrained methods while remaining competitive with approaches relying on geometric localization.

0.44

RMMBench: A Comprehensive Benchmark for Robotic Mobile Manipulation

cs.RO ·2026-10-04 ·Huapeng Li, Fuxiang Feng, Jinqiu Fan, Shuo Yang, Fengjiao Chen +3 more
publishedbenchmark similarity 0.66
Abstract · Accepted to the Conference on Robot Learning (CoRL 2026), November 9-12, 2026, Austin, TX, USA

Although the advancement of vision-language models (VLMs) has endowed robots with enhanced environmental understanding and task reasoning, a comprehensive evaluation methodology is important to advance the integration of VLMs in robotic navigation and manipulation. However, current benchmarks lack a comprehensive method to evaluate diverse robotic tasks, and evaluation metrics remain relatively constrained, making it difficult to assess the embodied capabilities of VLMs in a thorough and fine-grained manner. To address this issue, we propose RMMBench, an evaluation benchmark that requires robots to understand language instructions and perform long-horizon tasks in continuous spaces. RMMBench seamlessly integrates high- and low-level embodied tasks into a unified framework, constructing a "navigation-manipulation" task suite comprising 70 canonical task scenarios that range from localized manipulation to long-horizon composite navigation. The results reveal that leading VLMs still face major challenges in spatial localization when performing mobile manipulation tasks, and also highlight the necessity of enhancing the spatial perception capability of robots during long-horizon interactions. RMMBench can be accessed at https://mxxq-stack.github.io/rmmbench-project/

0.34

Towards Path-Creative Navigation: Robot Navigation through Embodied Interaction

cs.RO ·2026-10-08 ·Haoyu Xi, Siwei Cheng, Xiangyuan Liu, Brenda Li, Wei Zhang
similarity 0.66
Abstract

Autonomous navigation in cluttered and constrained environments typically assumes a fixed environment and searches only for paths within existing free space. However, a route can be blocked by an articulated structure, a movable object, or a pedestrian, and reaching the goal may therefore require appropriate embodied interaction with the environment. This paper formulates Path-Creative Navigation (PCN), a navigation paradigm in which the robot recovers free space by coordinating locomotion and embodied interaction, and addresses one class of PCN tasks with a mapless framework. The vision-LiDAR-odometry framework integrates local observations, obstacle geometry, and robot-state estimates through a unified navigation system, providing stable semantic and geometric information for navigation and interaction. The traversability-aware decision method utilizes visual and LiDAR distance information to determine whether a blockage is actionable and whether it can be safely bypassed, enabling the robot to interact only when necessary while supporting articulated structure pushing, movable object pushing, obstacle avoidance, and pedestrian requests. We design simulation scenarios and evaluate different methods in both simulation and two real-world tasks that cannot be completed by conventional navigation alone without embodied interaction. These results demonstrate that our framework achieves higher task completion than the baseline methods by coordinating navigation and interaction in cluttered and constrained environments.

0.17

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.66
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

AlphaTruck: A Platform for High-Speed Off-Road Autonomy on Unstructured Terrain

cs.RO ·2026-11-15 ·Rwik Rana, Adam J. Thorpe, Jesse Quattrociocchi, William Ward, Goktug Poyrazoglu +9 more
similarity 0.66
Abstract

Progress in autonomous navigation in off-road environments requires not only advances in algorithms, but also robust and capable physical platforms suited to both development and deployment. Today, off-road autonomy is typically developed and tested at one of two extremes of vehicle scale, each with different drawbacks. Full-size vehicles are capable but expensive, require large logistic infrastructure for deployment and maintenance, and expensive when pushed beyond their limits. RC-scale vehicles are small and inexpensive, but limited in the terrain they can traverse and the payload that they can carry, which includes their sensors and compute. We present the AlphaTruck platform, which leverages recent advances in compact sensing and compute to integrate multimodal sensing, embedded CPU-GPU compute, and an onboard autonomy stack for high-speed, off-road navigation, all integrated into a large-scale, 1/5th RC vehicle chassis. AlphaTruck is designed as both a research testbed and a field-deployable platform for commercial and defense missions such as survey, search and rescue, and agriculture, with the capacity to carry task-specific payloads. At 1/5 scale, the autonomy stack, sensors, and batteries all compete for the same mass, power, and cooling budget, so the platform must balance five needs: mobility over rough terrain, rich sensing, onboard computation, payload capacity to carry the autonomy stack while leaving room for task-specific equipment, and practical operation and repair. Thus, AlphaTruck navigates off-road environments autonomously at 6-10 m/s using only onboard sensing and compute.

0.48

SHIFT: Surface-aware High-speed Integration For TSDFs

cs.RO ·2026-09-06 ·Ayaan Choudhury, Lokender Tiwari
similarity 0.66
Abstract

Real-time 3D mapping is fundamental for autonomous robotic navigation, with Euclidean Signed Distance Fields (ESDFs) serving as the standard representation for online motion planning. While recent advancements in non- projective distance fields yield highly accurate maps, their computational overhead remains a severe bottleneck. Conventional integrators redundantly re-fuse millions of depth pixels every frame, even long after the corresponding voxels have converged, wasting significant computational resources in environments dominated by large planar surfaces. In this paper, we present SHIFT (Surface-aware High-speed Integration For TSDFs), an efficient mapping framework designed to reduce this per-frame update cost. By exploiting structural redundancy directly from 3D depth geometry, SHIFT compresses flat local regions into weighted super-rays and freezes flat-voxel gradients. A compact ESDF voxel layout further reduces the memory footprint of the remaining wavefront. Extensive evaluations across various RGB-D and LiDAR sequences show that SHIFT cuts TSDF cost by 1.42 to 4.07 times, while holding mesh error within millimeters, and reduces ESDF-layer memory by up to 28%

0.17