CS Paper Radar

ASDL: A Fast Vector Approximation Algorithm for Multiplierless Designs of Convolutional Neural Networks

Guillaume H. Tong, Luiz F. da S. Coelho, Lounis Zerioul, Didier Le Ruyet

eess.SP ·submitted 2026-11-16 13:50 UTC · v2

Abstract

Matrix multiplications are one of the main computational bottlenecks in neural networks. The calculation reduces to numerous sums of partial products, which scale with the total number of Signed Power of Two (SPT) values in the multiplier matrix. Minimizing the SPT count can significantly reduce the computational burden. In this context, we present a Sum Of (signed) Powers Of Two (SOPOT) vector approximation algorithm that limits SPT counts, namely the Accelerated Signed Digit Loading (ASDL) algorithm. This approximation algorithm converts ResNet50 10 times faster than its predecessor MPGBP, while being more precise. We apply this method to the pre-trained coefficients of different convolutional neural networks, achieving 80.41\% ImageNet accuracy down from 81.3\%, at an average of only 1.5 active bits per coefficient. This is done without any retraining or calibration, which are typically required for the most aggressive quantization methods. Our approach offers a promising direction for neural network inference with higher energy efficiency and fewer hardware requirements: we anticipate up to 10 times improvement over bfloat16 inference.

Closest papers

Nearest neighbours by meaning across the whole index.

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.72
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

Pruning Binarized Neural Networks: A Dedicated Framework and Globally Weighted Algorithms

cs.LG ·2026-08-26 ·Roan Rubiales, Jean Pierre David
similarity 0.69
Abstract · 9 pages, 3 figures, 5 tables, 3 algorithms

Extreme compression of deep neural networks, up to full binarization, dramatically reduces memory footprint and arithmetic complexity, facilitating deployment on constrained edge hardware with field-programmable gate arrays (FPGAs) and microcontrollers. Although combining binarization with pruning promises additional efficiency gains, existing pruning strategies are ill-suited to binarized representations and rarely translate into meaningful hardware savings. We introduce a PyTorch-based, research-oriented framework that incorporates freezing and pruning mechanisms for designing and optimizing binarized neural networks. The framework enables rapid and reproducible evaluation of state-of-the-art approaches and the fast prototyping of new ones. Leveraging this framework, we propose a novel pruning method that accounts for the relative importance of learned parameters across abstraction levels. Such a global weighting mechanism consistently achieves a superior trade-off between model accuracy and pruning rate, achieving a 70% pruning rate on VGG11 with constant accuracy, while state-of-the-art results reach only 41% in the binarized setting.

0.16

Decode Late, Multiply Once: Rethinking the Dot Product for Quantized Weights

cs.LG cs.AR ·2026-10-22 ·Jonathan Tapson
similarity 0.68
Abstract

Large neural networks are increasingly deployed with 1-4 bit weights and 16- or 32-bit activations, yet their dot products still use one multiplier per element. We show that a length-n dot product with k-bit weight codes can be computed with n+2^k additions and at most 2^k decodes and 2^k multiplications. Each weight code is used directly as an address offset that selects one of 2^k accumulators; each activation is added into the selected accumulator; and the accumulated sums are decoded and multiplied only once, at the end, in a fused decode-and-multiply step. The decoded weight vector is never formed. The refactoring is exact for integer arithmetic, works with integer or floating-point operands and with arbitrary, including nonlinear, decoders, and extends to group-wise scales and to matrix and tensor products. The multiplier count falls by n/2^k, while total arithmetic energy improves by a smaller, bounded factor that we quantify with a cost model. We describe a scatter-accumulate processing element (SA-PE) that replaces the MAC unit in a weight-stationary systolic array, with a load/stream/reduce/drain schedule in which a small, time-shareable multiplier runs only 2^k times per tile. Because decoded weights are not stored, local weight memory shrinks by up to w_d/k for w_d-bit decoded weights. An RTL implementation synthesized for FPGA and compared with a matched MAC array shows that an unshared SA-PE is larger than a MAC PE, and that the saving appears when the reduction multiplier is shared across PEs. Software models confirm exact integer equivalence and floating-point error no worse than the conventional pipeline. We do not claim the underlying identity is new, and we discuss related work on weight sharing and lookup-based kernels.

0.23

Precision-Aware Variable Bit Processing Elements for Hardware-Efficient Systolic Array Designs

cs.AR cs.ETcs.LGeess.IV ·2026-08-23 ·Dantu Nandini Devi, Madhav Rao
published similarity 0.68
Abstract

Systolic arrays (SAs) have emerged as prominent hardware accelerators for matrix operations in deep learning, while floating point number formats enable precision control across computational domains. This research investigates approximate computing techniques for floating point (FP) multipliers in Weight Stationary Systolic Arrays, focusing on IEEE 754 (FP32), TensorFloat-32 (TF32), and Brain Floating point (BF16) formats. By integrating partial product matrix (PPM) column truncation with positive and negative compressors in the FP multiplier architecture, we optimize the trade-off between computational efficiency and accuracy. NSGA-II optimization algorithm was employed to explore the vast design space for evolving FP multiplier designs, towards achieving substantial hardware improvements while maintaining acceptable output quality. Substantial hardware benefits were observed in the FP multiplier designs across various applications, while preserving output quality. The FP approximated Processing Elements designed in the SA was found to offer comparable CNN accuracy for models trained on MNIST, F-MNIST, and CIFAR-10 dataset. The FP approximated SA designs that fall in the top 10 CNN performance offered substantial hardware gains in the range of 66% to 92% footprint savings, 60% to 93% of power benefits with 21% to 54% improvement in the delay when compared with the corresponding exact implementations mentioned in the literature for running the model trained on CIFAR-10 dataset. The TF32 and BF16 approximated SA designs also achieved substantial gains while maintaining comparable CNN accuracy. Our findings confirm that targeted approximation in FP multiplier design significantly improves the efficiency of hardware accelerators for error-tolerant applications, establishing an effective approach to hardware resource optimization in contemporary computing architectures.

0.27

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.67
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

Bit-Sparsity Aware Acceleration with Compact CSD Code on Generic Matrix Multiplication

cs.AR ·2026-11-11 ·Zixuan Zhu, Xiaolong Zhou, Chundong Wang, Li Tian, Zunkai Huang +1 more
top venuehighly cited similarity 0.66
Abstract · Accepted for publication in IEEE Transactions on Computers (TC)

The ever-increasing demand for matrix multiplication in artificial intelligence (AI) and generic computing emphasizes the necessity of efficient computing power accommodating both floating-point (FP) and quantized integer (QINT). While state-of-the-art bit-sparsity-aware acceleration techniques have demonstrated impressive performance and efficiency in neural networks through software-driven methods such as pruning and quantization, these approaches are not always feasible in typical generic computing scenarios. In this paper, we propose Bit-Cigma, a hardware-centric architecture that leverages bit-sparsity to accelerate generic matrix multiplication. Bit-Cigma features (1) CCSD encoding, an optimized on-chip sparsification technique based on canonical signed digit (CSD) representation; (2) segmented dot product, a multi-stage exponent matching technique for long FP vectors; and (3) the versatility to efficiently process both FP and QINT data types. CCSD encoding halves the cost of CSD encoding while achieving optimal bit-sparsity, and segmented dot product improves both accuracy and throughput. Bit-Cigma cores are implemented using 65 nm technology at 1 GHz, demonstrating substantial gains in performance and efficiency for both FP and QINT configurations. Compared to state-of-the-art Bitlet, Bit-Cigma achieves 3.2\texttimes{} performance, 6.1\texttimes{} area efficiency, and 15.3\texttimes{} energy efficiency when processing FP32 data while ensuring zero computing error.

0.59

Memory-Efficient Integer-Only Training of Deep Neural Networks

cs.AI ·2026-10-12 ·Hazem Hesham Yousef Shalby, Fabrizio Pittorino, Manuel Roveri
similarity 0.65
Abstract · 19 pages

Training neural networks in reduced precision can yield significant efficiency gains, yet all existing methods that scale to standard computer vision benchmarks retain floating-point in at least one stage, typically the weight update or optimizer state. We present a training algorithm that scales to modern deep neural networks, in which every tensor (weights, gradients, and activations) is stored as INT8, and every operation (forward pass, backward pass, weight update, optimizer update) is performed in integer arithmetic. Specifically, tensors are stored as signed integer mantissas paired with explicit power-of-two exponents, on which integer-only operations are performed using five custom composable building blocks (products, sums, divide-by-constant, nonlinear functions, and weight updates). This allows complete implementation of trainable integer layers, including convolutions, batch and layer normalization, softmax, and GELU. A per-group velocity mechanism with independent exponent tracking preserves gradient precision across neurons and channels with diverse magnitudes. As every tensor fits in INT8, training memory is roughly 4x smaller than the FP32 baseline. We validate our training algorithm on CNNs (ResNet-18/34/50/101, MobileNetV2) and Vision Transformers (ViT-Ti / B), demonstrating for the first time that training neural networks with INT8 tensors and integer arithmetic can achieve competitive accuracy on CIFAR-10, CIFAR-100 and ImageNet at a reduced memory budget.

0.15

DualQuant: Dual-scale Calibration-free Weight-and-Activation Quantization for LLMs

cs.LG cs.AI ·2026-10-09 ·Mahsa Salmani, Sayeh Sharify, Hesham Mostafa
similarity 0.64
Abstract

Low-bit inference on accelerators with native 4-bit support requires quantizing both weights and activations to realize the full throughput gains these formats provide. While post-training weight quantization has been extensively studied, activation quantization remains considerably more challenging and typically requires calibration data. In this work, we introduce DUALQUANT, a dual-scale, calibration-free post-training quantization framework that directly minimizes the weight-reconstruction Mean Squared Error (MSE) and, as an immediate by-product, yields per-channel activation rescalings prior to activation quantization. Our key observation is that the scaling factors obtained by minimizing weight-reconstruction error provide effective activation rescalings, enabling competitive activation quantization without calibration data. We formulate DUALQUANT as a non-differentiable weight-reconstruction problem and develop an efficient solver based on variable splitting and block coordinate descent, where each subproblem admits a closed-form update. DUALQUANT provides a unified algorithm supporting a wide range of formats, including the full MX family and NVFP4. To our knowledge, DUALQUANT is the first dual-scaling method to formally support MX and NV block formats. Across Llama and Qwen models evaluated on WikiText-2, C4, and zero-shot downstream tasks, DUALQUANT matches or exceeds the accuracy of calibration-based SmoothQuant across most models and formats, and substantially outperforms calibration-free baselines, with large gains for MX and NV block formats. We validate these gains with a real packed W4A4 inference path for Llama-3.1-8B on an RTX 4090. The resulting implementation closely matches the accuracy of fake quantization while delivering up to 2.61x memory reduction and up to 2.46x throughput speedup over BF16.

0.43