CS Paper Radar

Precision-Aware Variable Bit Processing Elements for Hardware-Efficient Systolic Array Designs

Dantu Nandini Devi, Madhav Rao

cs.AR cs.ETcs.LGeess.IV ·submitted 2026-08-23 12:00 UTC · v1
published

Abstract

Systolic arrays (SAs) have emerged as prominent hardware accelerators for matrix operations in deep learning, while floating point number formats enable precision control across computational domains. This research investigates approximate computing techniques for floating point (FP) multipliers in Weight Stationary Systolic Arrays, focusing on IEEE 754 (FP32), TensorFloat-32 (TF32), and Brain Floating point (BF16) formats. By integrating partial product matrix (PPM) column truncation with positive and negative compressors in the FP multiplier architecture, we optimize the trade-off between computational efficiency and accuracy. NSGA-II optimization algorithm was employed to explore the vast design space for evolving FP multiplier designs, towards achieving substantial hardware improvements while maintaining acceptable output quality. Substantial hardware benefits were observed in the FP multiplier designs across various applications, while preserving output quality. The FP approximated Processing Elements designed in the SA was found to offer comparable CNN accuracy for models trained on MNIST, F-MNIST, and CIFAR-10 dataset. The FP approximated SA designs that fall in the top 10 CNN performance offered substantial hardware gains in the range of 66% to 92% footprint savings, 60% to 93% of power benefits with 21% to 54% improvement in the delay when compared with the corresponding exact implementations mentioned in the literature for running the model trained on CIFAR-10 dataset. The TF32 and BF16 approximated SA designs also achieved substantial gains while maintaining comparable CNN accuracy. Our findings confirm that targeted approximation in FP multiplier design significantly improves the efficiency of hardware accelerators for error-tolerant applications, establishing an effective approach to hardware resource optimization in contemporary computing architectures.

Closest papers

Nearest neighbours by meaning across the whole index.

FIGFLEX: A Mixed-Precision FP-INT GEMM Accelerator Co-Designed with Low-Bit LLM Quantization

cs.AR cs.LG ·2026-10-21 ·Faraz Tahmasebi, Haocheng Xu, Andrew Trauger, Yomal Perera, Zhenyu Tang +2 more
similarity 0.72
Abstract · 15 pages, 12 Figures

Weight-only quantization keeps LLM activations in floating point and stores weights as low-bit integers, turning the dominant workload into floating-point-integer (FP-INT) general matrix multiplication. Recent quantizers reach a 2-3-bit average with mixed precision, but hardware has not kept pace: GPUs dequantize weights to FP16 before the tensor-core multiply-accumulate, and bit-parallel FP-INT accelerators run at a single weight precision, so fewer bits save memory but not computation. In this paper, we present FIGFLEX, an algorithm-hardware co-designed mixed-precision accelerator whose bit-parallel datapath scales throughput as precision falls. FIGFLEX contributes (1) a shift-add, radix-4 reformulation of FP-INT multiplication that fuses the multiply-accumulate into a unified, precision-flexible partial-product reduction and roughly halves the partial products, together with a novel INT3 optimization that reclaims the idle datapath radix-4 leaves at that precision; and (2) a mixed-precision quantizer that assigns each channel group its bit-width according to the error GPTQ cannot compensate, with a per-input-channel column scaling whose power-of-two normalization keeps the scaled activations out of the FP16 subnormal range, so that the quantized model maps directly onto FIGFLEX's datapath with the same accuracy as on a GPU. On LLaMA-2-7B, FIGFLEX attains 5.85 and 8.77 WikiText-2 perplexity at 3- and 2-bit average precision, lower than GPTQ, AWQ, SliM-LLM, AMQ, and QuIP# (without fine-tuning), while delivering 1.56x and 1.42x higher whole-chip throughput per area on the linear GEMMs of a 3-bit mixed-precision model than AxCore and FIGLUT, respectively.

0.13

Bit-Sparsity Aware Acceleration with Compact CSD Code on Generic Matrix Multiplication

cs.AR ·2026-11-11 ·Zixuan Zhu, Xiaolong Zhou, Chundong Wang, Li Tian, Zunkai Huang +1 more
top venuehighly cited similarity 0.71
Abstract · Accepted for publication in IEEE Transactions on Computers (TC)

The ever-increasing demand for matrix multiplication in artificial intelligence (AI) and generic computing emphasizes the necessity of efficient computing power accommodating both floating-point (FP) and quantized integer (QINT). While state-of-the-art bit-sparsity-aware acceleration techniques have demonstrated impressive performance and efficiency in neural networks through software-driven methods such as pruning and quantization, these approaches are not always feasible in typical generic computing scenarios. In this paper, we propose Bit-Cigma, a hardware-centric architecture that leverages bit-sparsity to accelerate generic matrix multiplication. Bit-Cigma features (1) CCSD encoding, an optimized on-chip sparsification technique based on canonical signed digit (CSD) representation; (2) segmented dot product, a multi-stage exponent matching technique for long FP vectors; and (3) the versatility to efficiently process both FP and QINT data types. CCSD encoding halves the cost of CSD encoding while achieving optimal bit-sparsity, and segmented dot product improves both accuracy and throughput. Bit-Cigma cores are implemented using 65 nm technology at 1 GHz, demonstrating substantial gains in performance and efficiency for both FP and QINT configurations. Compared to state-of-the-art Bitlet, Bit-Cigma achieves 3.2\texttimes{} performance, 6.1\texttimes{} area efficiency, and 15.3\texttimes{} energy efficiency when processing FP32 data while ensuring zero computing error.

0.66

MFSA: A Multi-Format Systolic Array with Native Micro Scaling Support

cs.AR ·2026-10-14 ·Jiayi Wang, Kearnan Bishop, Ang Li
publishedcode/data similarity 0.68
Abstract · Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

AI workloads increasingly employ low-precision formats such as BF16 / FP16, FP8 variants, FP4, Micro Scaling (MX), and INT modes across models, layers, and execution stages to balance accuracy, memory footprint, and throughput, which in turn requires hardware to support these formats in a flexible and efficient way. We present MFSA, a weight-stationary multi-format systolic array that achieves area efficiency through two architectural choices. At the PE level, MFSA uses dot-product-accumulator-based processing elements extended from an existing open-source trans-precision FPU to support reduced-precision formats (FP32/FP16/BF16/CFP8/FP4/INT16/INT8/INT4) with a shared datapath and proportional throughput scaling. At the array level, MFSA employs Online Block-Scale Rebasing (OBSR) for block-scaled formats, which folds each block scale into the running FP32 partial sum at block boundaries without adding a second cross-block accumulator, thereby reducing the additional overhead of block-scaling support. In TSMC 28 nm at 1 GHz, matched-throughput BF16/FP8/FP4 cascaded FMA-PE baselines are 1.5x/2.5x/4.5x larger than the single-format DPA-PE, the gap growing with subword parallelism. A routed 16x16 MFSA reaches a peak 0.5/1/2/4 TOPS of FP32/BF16/FP8/FP4, and OBSR cuts the incremental MX overhead by 64.2% in area and 67.5% in energy versus a naive MX implementation baseline, without hurting the numerical stability on real LLM traces. Adding support for all other formats based on a BF16+CFP8 systolic array costs 25.7% additional area. OBSR also extends to non-power-of-two block scales: folding the fractional part of an E4M3 scale into the MFPE dot product supports NVFP4 alongside OCP MX for 11.8% area and 7.3% power over a CFP8+FP4 base, less than half the cost of a naive implementation.

0.63

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.68
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

ASDL: A Fast Vector Approximation Algorithm for Multiplierless Designs of Convolutional Neural Networks

eess.SP ·2026-11-16 ·Guillaume H. Tong, Luiz F. da S. Coelho, Lounis Zerioul, Didier Le Ruyet
similarity 0.68
Abstract

Matrix multiplications are one of the main computational bottlenecks in neural networks. The calculation reduces to numerous sums of partial products, which scale with the total number of Signed Power of Two (SPT) values in the multiplier matrix. Minimizing the SPT count can significantly reduce the computational burden. In this context, we present a Sum Of (signed) Powers Of Two (SOPOT) vector approximation algorithm that limits SPT counts, namely the Accelerated Signed Digit Loading (ASDL) algorithm. This approximation algorithm converts ResNet50 10 times faster than its predecessor MPGBP, while being more precise. We apply this method to the pre-trained coefficients of different convolutional neural networks, achieving 80.41\% ImageNet accuracy down from 81.3\%, at an average of only 1.5 active bits per coefficient. This is done without any retraining or calibration, which are typically required for the most aggressive quantization methods. Our approach offers a promising direction for neural network inference with higher energy efficiency and fewer hardware requirements: we anticipate up to 10 times improvement over bfloat16 inference.

0.24

ShatterQuant: Breaking Uniform Precision with Block-Wise Mixed-Precision on a Systolic Transformer Hardware Accelerator

cs.AR cs.AIeess.IV ·2026-09-20 ·Mikolaj Walczak, Edward Humes, Chao Fang, Marian Verhelst, Tinoosh Mohsenin
published similarity 0.68
Abstract

Due to limited support for intra-tensor heterogeneous precision in conventional accelerators, neural network quantization remains largely restricted to per-tensor precision assignment. We present ShatterQuant, a hardware-software co-designed framework enabling mixed-precision quantization within each tensor by assigning independent bit-widths to blocks of a weight projection. ShatterQuant couples precision granularity with PE configuration, such that each precision determines an effective block height. We introduce (1) a hardware-aware post-training method that assigns intra-tensor precision based on block-level standard deviation and weight sensitivity; (2) the ShatterQuant Transformer Accelerator supporting 1/2/4/8-bit weight precision, precision-dependent PE configuration, block rescaling, and integrated softmax and piecewise-linear nonlinearities; and (3) an evaluation of model-hardware tradeoffs using an implementation in the TSMC 16nm PDK operating at 1 GHz, achieving 1.5 TOPS, 760 GOPS/$mm^2$ area efficiency, and 2.8 TOPS/W energy efficiency. On DeiT and ImageNet-1K, ShatterQuant achieves accuracy within $3.3\%$ of state-of-the-art mixed-precision techniques while using a 2 bit lower effective bitwidth, while for PixelDiT demonstrates comparable generation quality. ShatterQuant demonstrates how fine-grained intra-tensor mixed-precision can be realized through hardware-software co-design.

0.30

Efficient Reconfigurable Architectures for Deep Learning

cs.AR ·2026-10-31 ·Endri Taka
hot direction similarity 0.67
Abstract · Ph.D. dissertation, Department of Electrical and Computer Engineering, The University of Texas at Austin, 2026

The growing computational demands of deep learning (DL) have driven AI-optimized reconfigurable devices, such as the AMD Versal AI Engines (AIEs), the Intel Stratix 10 NX Tensor Blocks (TBs), and the AMD Ryzen AI NPUs. Their heterogeneous resources and novel dataflow models make efficient exploitation nontrivial, and FPGAs lack native support for structured sparsity. This dissertation optimizes dense general matrix multiplication (GEMM), the dominant DL kernel, on these devices, proposes FPGA architectural enhancements for structured sparsity, and extends the techniques to AMD Ryzen AI NPUs. First, MaxEVA optimizes GEMM on Versal AIEs, achieving up to 2.19$\times$ higher throughput and 20.4% higher energy efficiency than the state of the art. It is then extended to arbitrary matrix sizes, and a systematic framework is proposed for the Stratix 10 NX TBs. Both frameworks reach state-of-the-art int8 throughput of up to 77 and 68 TOPS, and energy efficiency of up to 0.94 and 1.35 TOPS/W, on Versal and Stratix, respectively. Next, Systolic Sparse Tensor slices (SSTs) are proposed as in-fabric hard blocks supporting dense, 2:4, 1:4, and a new 1:3 sparsity level. SST-based GEMM accelerators achieve up to 5$\times$ higher frequency and 10.9$\times$ lower area than conventional FPGA logic, and on sparse ViT and CNN models SSTs deliver up to 3.52$\times$ speedup over dense in-fabric acceleration with up to 13.3% area increase. Finally, a common systematic methodology is proposed to optimize GEMM across the XDNA and XDNA2 AMD NPUs, reaching state-of-the-art performance of up to 6.76 and 38.05 TOPS (int8) and 3.14 and 14.71 TOPS (bf16), respectively.

0.24

MIAO: Microscaling Intermediate Accumulation Optimization

cs.AR ·2026-11-15 ·Chloe Wong, Nicolas Rakela, Man Shi, Hansung Kim, Ruohan Richard Yan +2 more
similarity 0.66
Abstract · 18 pages, 7 figures, 7 tables

Microscaling (MX) quantization enables lower-precision large language model (LLM) inference with limited accuracy degradation, reducing memory requirement and multiplication cost. However, despite reduced operand precision, accumulation is often retained at high floating-point precisions, leaving a substantial hardware cost that operand quantization alone does not address. In particular, systolic arrays, as used in tensor accelerators such as Google TPU and AWS Trainium, distribute accumulation across distinct processing elements but conventionally use uniform accumulator precision throughout the array. This spatial organization offers an opportunity to reduce hardware cost by tailoring precision to individual accumulation stages. In this work, we present MIAO, a hardware-software co-design framework that jointly selects product precision and stage-dependent accumulator widths to minimize hardware area and energy cost under an end-to-end perplexity constraint. MIAO first calibrates MX block-scale shifts to reduce intermediate magnitudes while preserving operand quantization accuracy, then assigns narrower accumulators to earlier stages and progressively wider accumulators to later stages. To efficiently explore the resulting design space, MIAO combines hardware cost estimates derived from logic synthesis with a calibrated accuracy predictor to identify promising precision configurations, then validates the accuracy of promising candidates through bit-exact end-to-end LLM evaluation. Across MXFP8, MXFP6, and MXFP4, MIAO reduces processing element (PE) array area by up to 38.7% and energy by up to 36.1% relative to the all-BF16 accumulation baseline, with at most 1.60% additional perplexity degradation over operand-only MX quantization across six LLMs.

0.25