CS Paper Radar

MFSA: A Multi-Format Systolic Array with Native Micro Scaling Support

Jiayi Wang, Kearnan Bishop, Ang Li

cs.AR ·submitted 2026-10-14 06:15 UTC · v1
publishedcode/data

Abstract

AI workloads increasingly employ low-precision formats such as BF16 / FP16, FP8 variants, FP4, Micro Scaling (MX), and INT modes across models, layers, and execution stages to balance accuracy, memory footprint, and throughput, which in turn requires hardware to support these formats in a flexible and efficient way. We present MFSA, a weight-stationary multi-format systolic array that achieves area efficiency through two architectural choices. At the PE level, MFSA uses dot-product-accumulator-based processing elements extended from an existing open-source trans-precision FPU to support reduced-precision formats (FP32/FP16/BF16/CFP8/FP4/INT16/INT8/INT4) with a shared datapath and proportional throughput scaling. At the array level, MFSA employs Online Block-Scale Rebasing (OBSR) for block-scaled formats, which folds each block scale into the running FP32 partial sum at block boundaries without adding a second cross-block accumulator, thereby reducing the additional overhead of block-scaling support. In TSMC 28 nm at 1 GHz, matched-throughput BF16/FP8/FP4 cascaded FMA-PE baselines are 1.5x/2.5x/4.5x larger than the single-format DPA-PE, the gap growing with subword parallelism. A routed 16x16 MFSA reaches a peak 0.5/1/2/4 TOPS of FP32/BF16/FP8/FP4, and OBSR cuts the incremental MX overhead by 64.2% in area and 67.5% in energy versus a naive MX implementation baseline, without hurting the numerical stability on real LLM traces. Adding support for all other formats based on a BF16+CFP8 systolic array costs 25.7% additional area. OBSR also extends to non-power-of-two block scales: folding the fractional part of an E4M3 scale into the MFPE dot product supports NVFP4 alongside OCP MX for 11.8% area and 7.3% power over a CFP8+FP4 base, less than half the cost of a naive implementation.

Comment
Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

MIAO: Microscaling Intermediate Accumulation Optimization

cs.AR ·2026-11-15 ·Chloe Wong, Nicolas Rakela, Man Shi, Hansung Kim, Ruohan Richard Yan +2 more
similarity 0.69
Abstract · 18 pages, 7 figures, 7 tables

Microscaling (MX) quantization enables lower-precision large language model (LLM) inference with limited accuracy degradation, reducing memory requirement and multiplication cost. However, despite reduced operand precision, accumulation is often retained at high floating-point precisions, leaving a substantial hardware cost that operand quantization alone does not address. In particular, systolic arrays, as used in tensor accelerators such as Google TPU and AWS Trainium, distribute accumulation across distinct processing elements but conventionally use uniform accumulator precision throughout the array. This spatial organization offers an opportunity to reduce hardware cost by tailoring precision to individual accumulation stages. In this work, we present MIAO, a hardware-software co-design framework that jointly selects product precision and stage-dependent accumulator widths to minimize hardware area and energy cost under an end-to-end perplexity constraint. MIAO first calibrates MX block-scale shifts to reduce intermediate magnitudes while preserving operand quantization accuracy, then assigns narrower accumulators to earlier stages and progressively wider accumulators to later stages. To efficiently explore the resulting design space, MIAO combines hardware cost estimates derived from logic synthesis with a calibrated accuracy predictor to identify promising precision configurations, then validates the accuracy of promising candidates through bit-exact end-to-end LLM evaluation. Across MXFP8, MXFP6, and MXFP4, MIAO reduces processing element (PE) array area by up to 38.7% and energy by up to 36.1% relative to the all-BF16 accumulation baseline, with at most 1.60% additional perplexity degradation over operand-only MX quantization across six LLMs.

0.25

Precision-Aware Variable Bit Processing Elements for Hardware-Efficient Systolic Array Designs

cs.AR cs.ETcs.LGeess.IV ·2026-08-23 ·Dantu Nandini Devi, Madhav Rao
published similarity 0.68
Abstract

Systolic arrays (SAs) have emerged as prominent hardware accelerators for matrix operations in deep learning, while floating point number formats enable precision control across computational domains. This research investigates approximate computing techniques for floating point (FP) multipliers in Weight Stationary Systolic Arrays, focusing on IEEE 754 (FP32), TensorFloat-32 (TF32), and Brain Floating point (BF16) formats. By integrating partial product matrix (PPM) column truncation with positive and negative compressors in the FP multiplier architecture, we optimize the trade-off between computational efficiency and accuracy. NSGA-II optimization algorithm was employed to explore the vast design space for evolving FP multiplier designs, towards achieving substantial hardware improvements while maintaining acceptable output quality. Substantial hardware benefits were observed in the FP multiplier designs across various applications, while preserving output quality. The FP approximated Processing Elements designed in the SA was found to offer comparable CNN accuracy for models trained on MNIST, F-MNIST, and CIFAR-10 dataset. The FP approximated SA designs that fall in the top 10 CNN performance offered substantial hardware gains in the range of 66% to 92% footprint savings, 60% to 93% of power benefits with 21% to 54% improvement in the delay when compared with the corresponding exact implementations mentioned in the literature for running the model trained on CIFAR-10 dataset. The TF32 and BF16 approximated SA designs also achieved substantial gains while maintaining comparable CNN accuracy. Our findings confirm that targeted approximation in FP multiplier design significantly improves the efficiency of hardware accelerators for error-tolerant applications, establishing an effective approach to hardware resource optimization in contemporary computing architectures.

0.27

FIGFLEX: A Mixed-Precision FP-INT GEMM Accelerator Co-Designed with Low-Bit LLM Quantization

cs.AR cs.LG ·2026-10-21 ·Faraz Tahmasebi, Haocheng Xu, Andrew Trauger, Yomal Perera, Zhenyu Tang +2 more
similarity 0.68
Abstract · 15 pages, 12 Figures

Weight-only quantization keeps LLM activations in floating point and stores weights as low-bit integers, turning the dominant workload into floating-point-integer (FP-INT) general matrix multiplication. Recent quantizers reach a 2-3-bit average with mixed precision, but hardware has not kept pace: GPUs dequantize weights to FP16 before the tensor-core multiply-accumulate, and bit-parallel FP-INT accelerators run at a single weight precision, so fewer bits save memory but not computation. In this paper, we present FIGFLEX, an algorithm-hardware co-designed mixed-precision accelerator whose bit-parallel datapath scales throughput as precision falls. FIGFLEX contributes (1) a shift-add, radix-4 reformulation of FP-INT multiplication that fuses the multiply-accumulate into a unified, precision-flexible partial-product reduction and roughly halves the partial products, together with a novel INT3 optimization that reclaims the idle datapath radix-4 leaves at that precision; and (2) a mixed-precision quantizer that assigns each channel group its bit-width according to the error GPTQ cannot compensate, with a per-input-channel column scaling whose power-of-two normalization keeps the scaled activations out of the FP16 subnormal range, so that the quantized model maps directly onto FIGFLEX's datapath with the same accuracy as on a GPU. On LLaMA-2-7B, FIGFLEX attains 5.85 and 8.77 WikiText-2 perplexity at 3- and 2-bit average precision, lower than GPTQ, AWQ, SliM-LLM, AMQ, and QuIP# (without fine-tuning), while delivering 1.56x and 1.42x higher whole-chip throughput per area on the linear GEMMs of a 3-bit mixed-precision model than AxCore and FIGLUT, respectively.

0.13

TOMOS: Eliminating Data Duplication in Mixed-Precision Matrix Computations

cs.MS ·2026-10-13 ·Vasileios Georgiou, Petros Drineas
similarity 0.66
Abstract

Mixed-precision algorithms exploit reduced-precision hardware, however computing with the same matrix at distinct precisions typically requires duplicate storage, repeated conversions, or operation-emulation. We introduce TOMOS, a composite-precision matrix format that provides implicit 32-bit and 16-bit access from a single representation. Each FP32 entry is split into a 16-bit primary word for low-precision computation and a complementary word that enables exact FP32 reconstruction. The encoding scheme improves numerical quality of the low-precision view through subnormal representations, and allows exact recovery of high-precision inputs. TOMOS uses FP32-sized storage, with data movement scaling with compute precision. Optimized GEMM and GEMV kernels achieve throughput comparable to vendor libraries on NVIDIA A100 GPUs, while a mixed-precision least-squares solver achieves up to 1.6x speedup over FP32 without redundant matrix allocations.

0.16

BF16 Component-Product Emulation of FP32 and FP64 GEMM on Intel AMX

cs.MS cs.DC ·2026-09-04 ·Bing Cui, Yu Liu
similarity 0.66
Abstract

Modern CPUs increasingly integrate high-throughput matrix engines optimized for low-precision AI workloads, while many scientific computing applications still rely on FP32 and FP64 GEMM to meet their numerical accuracy requirements. This mismatch motivates an algorithmic bridge that uses low-precision matrix products to emulate higher-precision GEMM. This paper presents a CPU-oriented method based on Intel Advanced Matrix Extensions (AMX) and BF16 matrix products. For FP32, each operand is decomposed into three BF16 components and six selected component products are evaluated, targeting FP32-level accuracy relative to oneMKL SGEMM without claiming elementwise or bitwise identity. For FP64 inputs within the supported BF16 exponent range, the method uses a simplified fixed six-slice Ozaki decomposition. Each retained BF16 product is first produced in FP32, then widened and accumulated in FP64. Four product-count settings retain 6, 10, 15, or 21 component products, exposing the accuracy--performance tradeoff relative to oneMKL DGEMM. The implementation combines precomputed packed component buffers, VNNI-packed $B$ panels, and an FP32 tile-resident operand-reuse schedule. On the tested square matrices, AMX-FP32 exceeds oneMKL SGEMM throughput. For AMX-FP64, low-product-count variants can exceed DGEMM at sufficiently large orders, while retaining more products improves accuracy at additional cost.

0.38

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

cs.DC ·2026-10-31 ·Richard Neale, Nick Brown
publishedbenchmark similarity 0.62
Abstract · Author accepted version of paper published in RISC-V for HPC workshop at SC26

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

0.36

Format-Aware Fusion for Fast FP4 Pretraining

cs.LG ·2026-09-04 ·Robert Hu
similarity 0.62
Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

0.13

Silent Degradation during Auto-Vectorization of bf16/fp16 on RISC-V Under LLVM

cs.PL ·2026-11-02 ·Vaishnavi Kouru, Robert Chun
hot direction similarity 0.62
Abstract

Low-precision numeric types such as 8-bit integers, bfloat16, and half-precision floating point (fp16) are often used in AI inference workloads to reduce memory bandwidth, and RISC-V's openly specified Vector extension (RVV) is a natural target for compiling such workloads with auto-vectorization. This paper examines whether LLVM's RISC-V auto-vectorizer handles these narrow types equally well, using a multiply-accumulate loop written for fp32, int8, bf16, and fp16. Under a common baseline target (-march=rv64gcv), int8 and fp32 vectorize cleanly, while bf16 and fp16 degrade to increasingly scalar-heavy fallback code, with fp16 falling back to per-element software conversion calls, unless additional target-feature extensions (zvfbfmin/zvfbfwma, zvfhmin) are enabled. Under QEMU user-mode emulation, the baseline bf16 and fp16 kernels execute $17.0\times$ and $75.9\times$ as many dynamic instructions as their extension-enabled counterparts. Compiler diagnostics do report this degradation, but do not distinguish, in their wording, between a limitation that a compiler flag resolves entirely and one reflecting an inherent conversion cost, leaving no direct signal toward the fix. These results are supported by assembly-level instruction analysis, by direct inspection of LLVM's optimization remarks, and by dynamic instruction counts collected under emulation.

0.34