CS Paper Radar

Silent Degradation during Auto-Vectorization of bf16/fp16 on RISC-V Under LLVM

Vaishnavi Kouru, Robert Chun

cs.PL ·submitted 2026-11-02 20:22 UTC · v2
hot direction

Abstract

Low-precision numeric types such as 8-bit integers, bfloat16, and half-precision floating point (fp16) are often used in AI inference workloads to reduce memory bandwidth, and RISC-V's openly specified Vector extension (RVV) is a natural target for compiling such workloads with auto-vectorization. This paper examines whether LLVM's RISC-V auto-vectorizer handles these narrow types equally well, using a multiply-accumulate loop written for fp32, int8, bf16, and fp16. Under a common baseline target (-march=rv64gcv), int8 and fp32 vectorize cleanly, while bf16 and fp16 degrade to increasingly scalar-heavy fallback code, with fp16 falling back to per-element software conversion calls, unless additional target-feature extensions (zvfbfmin/zvfbfwma, zvfhmin) are enabled. Under QEMU user-mode emulation, the baseline bf16 and fp16 kernels execute $17.0\times$ and $75.9\times$ as many dynamic instructions as their extension-enabled counterparts. Compiler diagnostics do report this degradation, but do not distinguish, in their wording, between a limitation that a compiler flag resolves entirely and one reflecting an inherent conversion cost, leaving no direct signal toward the fix. These results are supported by assembly-level instruction analysis, by direct inspection of LLVM's optimization remarks, and by dynamic instruction counts collected under emulation.

Closest papers

Nearest neighbours by meaning across the whole index.

SVRF: Efficient Register Storage for Long-Vector Architectures

cs.AR ·2026-10-05 ·Francesco Minervini, Lorenzo Deltetto, Osman Unsal, Adrian Cristal
similarity 0.65
Abstract

Vector processors exploit data-level parallelism to provide high computational throughput, but very long vectors can make the Vector Register File (VRF) a significant source of area, energy, and register pressure. This cost is exacerbated when vector instructions operate on values with scalar semantics: although such values are architecturally represented using vector registers, they do not require full-width storage. This paper proposes the Scalarized Vector Register File (SVRF), a microarchitectural enhancement that redirects scalar-semantics vector values to a dedicated scalar register file, avoiding unnecessary allocation and access of full-width physical vector registers. The SVRF integrates with vector register renaming while preserving compatibility with the supported vector ISA. We implement and evaluate SVRF in an Register Transfer Level (RTL)-based RISC-V Vector Extension (RVV)-compliant vector processing unit supporting very long vectors. Across representative HPC and AI/ML workloads, the SVRF reduces vector-register pressure and VRF activity without degrading performance. By exploiting the resulting reduction in VRF demand, the proposed design achieves up to 15.8% VRF area reduction and up to 6% total area reduction, while reducing total power by up to 12% in evaluated configurations. Some workloads also achieve up to 1.12X speedup.

0.15

BF16 Component-Product Emulation of FP32 and FP64 GEMM on Intel AMX

cs.MS cs.DC ·2026-09-04 ·Bing Cui, Yu Liu
similarity 0.65
Abstract

Modern CPUs increasingly integrate high-throughput matrix engines optimized for low-precision AI workloads, while many scientific computing applications still rely on FP32 and FP64 GEMM to meet their numerical accuracy requirements. This mismatch motivates an algorithmic bridge that uses low-precision matrix products to emulate higher-precision GEMM. This paper presents a CPU-oriented method based on Intel Advanced Matrix Extensions (AMX) and BF16 matrix products. For FP32, each operand is decomposed into three BF16 components and six selected component products are evaluated, targeting FP32-level accuracy relative to oneMKL SGEMM without claiming elementwise or bitwise identity. For FP64 inputs within the supported BF16 exponent range, the method uses a simplified fixed six-slice Ozaki decomposition. Each retained BF16 product is first produced in FP32, then widened and accumulated in FP64. Four product-count settings retain 6, 10, 15, or 21 component products, exposing the accuracy--performance tradeoff relative to oneMKL DGEMM. The implementation combines precomputed packed component buffers, VNNI-packed $B$ panels, and an FP32 tile-resident operand-reuse schedule. On the tested square matrices, AMX-FP32 exceeds oneMKL SGEMM throughput. For AMX-FP64, low-product-count variants can exceed DGEMM at sufficiently large orders, while retaining more products improves accuracy at additional cost.

0.37

MFSA: A Multi-Format Systolic Array with Native Micro Scaling Support

cs.AR ·2026-10-14 ·Jiayi Wang, Kearnan Bishop, Ang Li
publishedcode/data similarity 0.62
Abstract · Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

AI workloads increasingly employ low-precision formats such as BF16 / FP16, FP8 variants, FP4, Micro Scaling (MX), and INT modes across models, layers, and execution stages to balance accuracy, memory footprint, and throughput, which in turn requires hardware to support these formats in a flexible and efficient way. We present MFSA, a weight-stationary multi-format systolic array that achieves area efficiency through two architectural choices. At the PE level, MFSA uses dot-product-accumulator-based processing elements extended from an existing open-source trans-precision FPU to support reduced-precision formats (FP32/FP16/BF16/CFP8/FP4/INT16/INT8/INT4) with a shared datapath and proportional throughput scaling. At the array level, MFSA employs Online Block-Scale Rebasing (OBSR) for block-scaled formats, which folds each block scale into the running FP32 partial sum at block boundaries without adding a second cross-block accumulator, thereby reducing the additional overhead of block-scaling support. In TSMC 28 nm at 1 GHz, matched-throughput BF16/FP8/FP4 cascaded FMA-PE baselines are 1.5x/2.5x/4.5x larger than the single-format DPA-PE, the gap growing with subword parallelism. A routed 16x16 MFSA reaches a peak 0.5/1/2/4 TOPS of FP32/BF16/FP8/FP4, and OBSR cuts the incremental MX overhead by 64.2% in area and 67.5% in energy versus a naive MX implementation baseline, without hurting the numerical stability on real LLM traces. Adding support for all other formats based on a BF16+CFP8 systolic array costs 25.7% additional area. OBSR also extends to non-power-of-two block scales: folding the fractional part of an E4M3 scale into the MFPE dot product supports NVFP4 alongside OCP MX for 11.8% area and 7.3% power over a CFP8+FP4 base, less than half the cost of a naive implementation.

0.63

Accelerating the Mitigation of LLM Inference Nondeterminism Across GPU Architectures

cs.AR cs.LG ·2026-09-22 ·Liam Cooper, Shinnung Jeong, Hyeran Jeon, Jeffrey Young, Hyesoon Kim
similarity 0.60
Abstract · 14 pages, 5 figures

Large language model (LLM) outputs are expected to be reproducible under greedy decoding, yet in practice the same model, prompt, and software stack produce different outputs on different GPUs. The root cause is floating-point non-associativity combined with hardware-dependent kernel selection. Inference frameworks select different matrix-multiplication kernels on each architecture, with different parallel reduction orders and unspecified tensor-core arithmetic, and the resulting rounding differences can flip output tokens. Existing solutions have imperfect cross-architecture reproducibility and incur a significant performance penalty. We present a solution employing a set of fixed-configuration fused-upcast GEMM kernels that load 16-bit weights from memory, upcast them to FP32 in registers, and accumulate with IEEE-754 arithmetic in a reduction order that is a pure function of the problem shape and is therefore independent of the device, its SM count, or kernel scheduling. By fixing the floating-point reduction order as a function of problem shape alone, every GPU runs the same operation sequence, so cross-architecture reproducibility of the linear layers reduces to correct IEEE-754 arithmetic rather than to rounding differences staying below a tie-flip threshold. We confirm our solution's linear-layer outputs are bitwise identical across NVIDIA Ampere, Ada, and Hopper GPUs, while running $1.17$ to $3.1\times$ faster end-to-end than the state-of-the-art solution and cutting weight-memory traffic in half.

0.32

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

cs.DC ·2026-10-31 ·Richard Neale, Nick Brown
publishedbenchmark similarity 0.60
Abstract · Author accepted version of paper published in RISC-V for HPC workshop at SC26

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

0.36

Reorienting the Vector Axis: Restructuring FlashAttention for Long-Vector Processors

cs.AR cs.DCcs.PF ·2026-10-21 ·Emmanuel Irabor, Marc Casas
similarity 0.60
Abstract

A Transformer is built around attention, whose cost grows with the square of the sequence length and dominates the layer on long sequences. FlashAttention made that cost manageable by tiling the attention matrix and updating the softmax as it goes, but almost all work since has targeted GPUs. On long-vector processors one vector register can hold up to 512 single-precision numbers. The savings of a vector instruction are proportional to how much of the register it uses, so the choice of which loop to vectorize is a first-order decision. We port PyTorch's CPU FlashAttention kernel to a RISC-V CPU with 2KB vector registers and find that it reaches 16.2% of peak floating-point throughput. The kernel walks each tile one query row at a time: the product against V is vectorized along the 64-element head dimension, the softmax's per-row maximum and sum are reductions that collapse a full register to a scalar, and the software exponential's polynomial coefficients compete with tile data for vector registers and cause spilling. We propose two techniques. The first transposes the score tile and the running output so that queries lie along the contiguous axis. The algorithm and its values are unchanged. A single parameter, the number of queries in a tile, now sets the vector length of every part of the kernel and can be matched to the machine. Both reductions also disappear. The second moves the polynomial's coefficients into scalar registers, removing the spills and cutting the softmax's vector memory instructions by 78.7%. On silicon the two together cut whole-kernel cycles by 1.84 to 2.08x at a head dimension of 64, raising floating-point utilization from 16.2% to 29.7% of peak. An FPGA of the same design ranks the changes identically and scores them higher, at 2.71x.

0.06

RLX: A Unified Multi-Backend Tensor Compiler and Distributed Runtime in Rust

cs.DC cs.AI ·2026-09-29 ·Eugene Hauptmann, Nataliya Kosmyna
published similarity 0.60
Abstract · 6 pages, 4 figures, peer-reviewed and presented at 2026 IEEE High Performance Extreme Computing Conference (HPEC)

Production machine learning (ML) stacks often split graph compilation and kernel execution across different layers and languages, making backend behavior, deployment guarantees, and performance fallbacks hard to reason about end-to-end. RLX addresses this gap with a single Rust codebase that combines compiler and runtime roles around one primitive-level, three-level intermediate representation (IR), plus a transparent dispatch contract that resolves each operator to native, common-IR, or rewritten lowering and fails compilation when legalization is not possible. The same IR targets fourteen runtime devices (cpu, metal, mlx, ane, cuda, rocm, oneapi, tpu, hexagon, gpu, vulkan, opengl, directx, webgpu) and two specialty codegen paths (Cortex-M INT8 and FPGA), ingests safetensors, GGUF, ONNX, and rten formats, supports F16/BF16/F64/C64 and quantized INT4/INT8 flows with AMP/PTQ/QAT, and scales via tensor-/pipeline-parallel collectives over TCP and RDMA transports. Beyond neural workloads, RLX also extends to scientific/physics-style domains through sparse and dense linear algebra extensions (e.g., CSR LU/CG/matvec and LAPACK- backed factorizations) and 3D Gaussian splatting operators. We evaluate RLX against PyTorch, TensorFlow, JAX, candle, burn, tch, rten, MLX, CoreML, IREE, Glow, TensorRT, and tinygrad under identical input generation and p50 measurement methodology on one host. On all-MiniLM-L6-v2, RLX-Metal is fastest at every batch (e.g., 16.6 ms at batch 32 vs. PyTorch-MPS 26.7 ms). In the MNIST training table, RLX also has the top-throughput entry (graph-fused MLP: 946,487 img/s), above NumPy+BLAS (787,349 img/s), while retaining 100% top-1 parity on reference checks (e.g., Qwen3).

0.34

Format-Aware Fusion for Fast FP4 Pretraining

cs.LG ·2026-09-04 ·Robert Hu
similarity 0.60
Abstract

Four-bit floating-point (FP4) Tensor Cores accelerate matrix multiplication, but scale computation, operand packing, layout construction, and saved backward state can erase the gain. We present \emph{format-aware fusion}, which co-designs each quantization producer with its scale domain and consumer layout for native \mxfp{}, global \nvfp{}, and cooperative-thread-array-local \nvfp{}. We evaluate Llama-3-family 8B pretraining through 160 billion tokens using bfloat16 output projections and compiled cross entropy. In matched same-accelerator probes, bfloat16 and Transformer Engine \nvfp{} reach 18.8K and 27.6K tokens/s/GPU, while our fastest custom route reaches 37.9K. \mxfp{} with row-gradient stochastic rounding and fixed-sign 32-value Hadamard weight-gradient preconditioning reaches 37.2K tokens/s/GPU (86.3\% bfloat16 model FLOP utilization) and ends 2.11\% above the raw bfloat16 training-loss endpoint. A Transformer Engine recipe with four final bfloat16 blocks ends 0.87\% above bfloat16 at 27.1K tokens/s/GPU. Downstream rankings differ from training-loss rankings, showing that FP4 outcomes depend jointly on scale contract, operand, and execution path.

0.13