CS Paper Radar

Magflow: Differentiable Simulation of Industrial-Grade 6D Magnetic Levitation

Philipp Hartmann, Jannick Stranghöner, Klaus Neumann

cs.RO cs.LGeess.SY ·submitted 2026-11-17 16:46 UTC · v1
top venuecode/data

Abstract

Magnetic levitation with six-degrees-of-freedom enables frictionless transport and micrometer-scale positioning in principle, but low-level control is inherently challenging due to its complex and unstable dynamics. Industrial systems typically rely on deep hardware-software co-design, where mover and stator geometries are jointly designed to enable a compact, hand-crafted approximation of the electromagnetic force computation, thereby keeping control computationally tractable at kilohertz rates. However, this approach imposes overly conservative constraints on the operating workspace and the range of supported mover topologies. Instead of reducing the underlying physics to a hand-crafted approximation, we compute the physics directly. We introduce Magflow, a fully differentiable, GPU-parallel simulator for 6D magnetic levitation. It is used to train the first neural controller for an industrial-grade 6D magnetic levitation system that is learned purely from simulated physics. We show that the learned neural controller transfers zero-shot from simulation to real hardware while satisfying hard real-time constraints at 4 kHz. The learned controller achieves qualitatively new behaviors and even levitates a mover topology for which no hand-crafted solution exists. These results demonstrate that co-design is not a physical necessity for 6D magnetic levitation control. More broadly, control learning from simulated physics can find solutions beyond the reach of control engineering in demanding industrial domains. Source code and demonstration videos are publicly available at https://sites.google.com/view/magflow.

Comment
8 pages, 5 figures, 1 table. Accepted for publication in IEEE Robotics and Automation Letters (RA-L). Project page: https://sites.google.com/view/magflow

Closest papers

Nearest neighbours by meaning across the whole index.

From Transportation to Manipulation: Enabling Grasping in Magnetic Robotics

cs.RO ·2026-09-11 ·Lara Bergmann, Noah Greis, Cedric Grothues, Lisa-Marie Weigelt, Klaus Neumann
similarity 0.65
Abstract

Magnetic levitation (MagLev) systems have great potential for application in high-mix, low-volume manufacturing due to their scalability and flexibility, enabling highly reconfigurable in-machine material flow. However, their manipulation capabilities remain largely unexploited, as current applications almost exclusively focus on transportation. To enable grasping and manipulation directly on MagLev systems without requiring additional costly handling equipment, such as industrial robot arms, we present the Gripper MagBot, a low-cost parallel 6-DoF manipulator with an integrated 1-DoF gripper that mechanically couples three MagLev movers. The Gripper MagBot supports two operating configurations: a default mode and a single-track mode, selectable depending on the required stability and workspace footprint. To reconfigure a machine, the MagBot can be autonomously dropped off and picked up using a docking station. We showcase pick-and-place examples in simulation, as well as with the real Gripper MagBot using our inverse kinematics controller. CAD files, assembly instructions, a component list, and videos are available at https://sites.google.com/view/gripper-magbot.

0.31

MagServo: Uncertainty-Resilient Hierarchical Magnetic Servoing via Learned Latent Representations

cs.RO ·2026-10-05 ·Yuhan Tan, Yameng Zhang, Pei Liu, Yao Zhong, Zhongliang Jiang
similarity 0.60
Abstract

Magnetic navigation provides contact-free and line-of-sight-independent feedback for robotic systems, yet existing approaches typically rely on explicit pose estimation or direct use of raw magnetic measurements, making accurate control susceptible to modeling errors, measurement noise, and disturbances. This work presents MagServo, a hierarchical learning-based framework for robust 6-DoF magnetic servoing directly using the learned latent magnetic feature. MagServo learns uncertainty-resilient magnetic representations through masked reconstruction and captures state-dependent interaction dynamics between robot motion and latent magnetic transitions without analytical magnetic models or explicit Jacobian supervision. Based on the learned dynamics, a hierarchical controller combines nonlinear model predictive control for coarse approach with local Jacobian inversion for precise fine regulation. Extensive physical experiments demonstrate submillimeter and subdegree accuracy, achieving mean terminal errors of 0.386 mm and 0.479 degree for 6-DoF pose reaching. MagServo further outperforms a localization-based control baseline in complex trajectory tracking and maintains robust performance under unseen magnetic-source configurations without retraining. A supplementary video of the real-robot experiments is available at https://youtu.be/rZt1NUP1Mr0.

0.38

PINGU: Extending Air-Bearing Spacecraft Emulators with Open-Source Actuators and Learned Control for Contact-Rich Proximity Operations

cs.RO ·2026-09-20 ·Ricard Marsal I Castan, Akiyoshi Uchida, Aman Arora, Pedro Lima, Matteo El-Hariry +5 more
benchmarkcode/data similarity 0.58
Abstract

Low-cost planar air-bearing testbeds have matured into a standard proxy for free-flying spacecraft GNC, but they remain largely thruster-only and are rarely equipped for contact-rich, inertia-coupled manipulation. Building on the open-source ATMOS testbed, we contribute a reaction wheel and two force/torque-sensed robotic arms (LEVION) with interchangeable end-effectors, integrated as first-class control actuators through a unified ROS 2 abstraction layer. On top of the software stack we build a reinforcement-learning training environment and digital twin, and a controller that exploits these added degrees of freedom, letting classical optimal controllers and learned policies be swapped on the same hardware without modification. We validate the integrated system, PINGU, across four benchmark tasks: point-to-pose navigation (classical LQR vs. sim-to-real PPO), dynamic disturbance rejection under arm-induced center-of-mass shifts, reaction-wheel momentum stabilization, and force-controlled docking. The results show that these additions extend an ATMOS-class emulator into the contact-rich regime and bridge classical optimal control and reinforcement learning on one reproducible platform.

0.28

Physical AI for Intralogistics: Benchmarking the NVIDIA Sim-to-Real Ecosystem for Cosmos-Enhanced COMPASS Navigation on Industrial Mobile Robots

cs.RO ·2026-10-20 ·Charbel Abi Hana, Rayan Zaitouni, Kameel Amareen, Mohamad Mostafa, Hasan Sayour +4 more
benchmark similarity 0.56
Abstract

Classical robot navigation stacks are reliable but often require re-engineering for each new robot type and site. Learning-based navigation shifts this effort from hand-tuned parameters to data generation and training, where a policy adapts to each new embodiment or facility by fine-tuning in simulation. Whether policies adapted this way stay reliable on real industrial robots has seen little systematic testing. We study this for NVIDIA's X-Mobility and COMPASS workflow for training learned navigation policies on Idealworks robots. In simulation, we extend the COMPASS benchmark with two embodiments, the differential-drive iw$\mkern-1.5mu.\mkern-1.5mu$hub and an omnidirectional Humanoid Mobile Platform (HMP), and with a digital twin of the Idealworks R&D center. For the real world, we fine-tune X-Mobility on data from this digital twin, with and without sim-to-real variants generated by NVIDIA Cosmos, train COMPASS on top of it from scratch in the digital twin, deploy the resulting policies on the iw$\mkern-1.5mu.\mkern-1.5mu$hub's onboard Jetson AGX Xavier, and benchmark them in the Idealworks R&D center against COMPASS trained only on NVIDIA's environments and the existing Idealworks navigation stack on task success, efficiency, safety, smoothness and onboard compute. Running every static scenario both in a digital-twin replica and in the real facility measures the sim-to-real gap and how far Cosmos-augmented data closes it. Training in the digital twin with Cosmos sim-to-real augmentation raises the real-world success rate of learned navigation from 65.3% to 91.7% across four scenarios and nearly halves its weighted travel time compared with simulation-only training, bringing it within 8.3 points of the production navigation stack, fully onboard; with an integrated global planner, it also reaches far, occluded goals in every trial.

0.13

Micro Neural Policies for Safe Real-Time Robotic Control

cs.RO cs.AI ·2026-10-06 ·Hongpeng Cao, Riccardo Curcio, Daniele Ottaviano, Marco Caccamo
similarity 0.56
Abstract · 9 pages

In this paper, we investigate the synthesis of Micro Neural Policies (MNP) to enable safe and robust real-time robotic control on computationally constrained embedded devices. We demonstrate that integrating Evolution Strategy (ES) and Statistical Model Checking (SMC)-based verification for policy search can drastically reduce neural network size without compromising safety and robustness. We conduct a large-scale training and evaluation of MNP on Cartpole and Quadrotor control tasks, varying control frequencies and network architectures. After validating these policies in simulation, we evaluate their deployability through zero-shot transfer to physical systems. Our experiments show that MNP can successfully achieve safe sim-to-real transfer without sacrificing control performance. We then show that the policies' memory footprint, ranging from 0.5 to 7.5 kB, allows deployment on microcontrollers, where they achieve real-time inference latency with under 25 ns of jitter while leaving the chip idle for over 97% of the time for additional workloads. This makes them a highly practical solution for severely resource-constrained robotic systems.

0.21

UWB Meets Crazyflow: Simulating Degraded Feedback at Scale for Aerial Robotics

cs.RO ·2026-10-06 ·Martin Schuck, Marcel P. Rath, Yufei Hua, Abhishek Goudar, SiQi Zhou +1 more
published similarity 0.55
Abstract · Accepted to 1st Workshop on Robot Meets GNSS and Ranging for Seamless Autonomy @ ICRA 2026

In this work, we introduce Crazyflow, an accurate, differentiable simulator built on JAX. By leveraging jit compilation via XLA, Crazyflow unifies physics and control into a single differentiable computation graph, enabling massive parallelization on accelerated hardware without sacrificing modeling accuracy. This architecture achieves order-of-magnitude speedups over existing baselines, capable of training deployable reinforcement learning agents in seconds. To highlight its highly modular design, we demonstrate how easily Crazyflow can be extended by integrating a complete, high-fidelity Ultra-Wideband (UWB) and Inertial Measurement Unit (IMU) simulation pipeline coupled with a full-state Extended Kalman Filter (EKF). This capability allows for massive parallel controller evaluation under realistic, degraded state feedback with minimal impact on GPU throughput. By combining speed, accuracy, and extensibility, Crazyflow serves as a foundational tool for the next generation of aerial robotics research.

0.27

Aero Hand Open: A Simulation-Ready Tendon-Driven Hand for Dexterous Manipulation Learning

cs.RO cs.AIcs.LG ·2026-08-28 ·Nan Wang, Mohit Yadav, Jonathan Wulff, Aidan Rosenbaum, Kezhou Chen +3 more
code/data similarity 0.54
Abstract · 20 pages, 9 figures. Project page: https://chestnut-robotics.github.io/aero-hand-open/

Tendon-driven hands are anthropomorphic, and moving the actuators off the joints is what makes a hand of this capability affordable to build. Two effects produce that saving. Routing force through a cable removes the requirement that a motor fit inside the joint it drives, so smaller and cheaper motors suffice, and one motor can drive several joints through a single cable, so fewer motors are needed. They are also harder to learn on than a direct-drive hand. The underactuated transmission that produces the saving is itself difficult to represent in a simulator, and the joints one cable drives are not independently commandable. We present Aero Hand Open, a tendon-driven anthropomorphic hand that is released simulation-ready. Three things ship with it. A simulation model reproduces the cable transmission itself. An identified actuation map connects that model to the motor commands in both directions, including the three-way coupling of the thumb. A reinforcement learning package trains policies for the hand. Together they let a policy be trained entirely in simulation and run on the hand with no fine-tuning and no state estimation. We release the mechanical design, the simulation model, the identified mapping, the training environment and the deployment stack.

0.47

FALCON-S: Fixed-wing ground-effect Aerodynamics Simulator and Flight Control Learning Suite

cs.RO cs.LGeess.SY ·2026-09-05 ·Matteo El Hariry, Pedro Lima, Andrej Orsula, Matthieu Geist, Miguel Olivares-Mendez
similarity 0.54
Abstract · Index Terms: Robot Learning, Flight Control, Reinforcement Learning, Autonomous Navigation, Control and Dynamics, Modeling and Simulation, W…

We present a modular, high-fidelity simulation framework for the development and benchmarking of flight control strategies in fixed-wing aerial robots operating near the ground. Unlike existing simulators that rely on simplified or hover-oriented dynamics, our framework models full 6DoF rigid-body physics, semi-empirical ground-effect aerodynamics, actuator dynamics, sensor noise, and environmental disturbances. This physical realism, combined with modular component design, enables systematic analysis of low-altitude flight behavior under realistic conditions. The simulator supports both CPU and GPU backends via Torch and NVIDIA Warp, enabling high-throughput parallel execution suitable for large-scale reinforcement learning training and optimal control rollouts. A unified interface accommodates a range of controllers (both RL and optical control algorithms) across tasks such as altitude regulation and trajectory tracking. Cross-validation with X-Plane and JSBSim is also supported to facilitate engineering integration and visual fidelity.

0.18