CS Paper Radar

From Transportation to Manipulation: Enabling Grasping in Magnetic Robotics

Lara Bergmann, Noah Greis, Cedric Grothues, Lisa-Marie Weigelt, Klaus Neumann

cs.RO ·submitted 2026-09-11 14:08 UTC · v1

Abstract

Magnetic levitation (MagLev) systems have great potential for application in high-mix, low-volume manufacturing due to their scalability and flexibility, enabling highly reconfigurable in-machine material flow. However, their manipulation capabilities remain largely unexploited, as current applications almost exclusively focus on transportation. To enable grasping and manipulation directly on MagLev systems without requiring additional costly handling equipment, such as industrial robot arms, we present the Gripper MagBot, a low-cost parallel 6-DoF manipulator with an integrated 1-DoF gripper that mechanically couples three MagLev movers. The Gripper MagBot supports two operating configurations: a default mode and a single-track mode, selectable depending on the required stability and workspace footprint. To reconfigure a machine, the MagBot can be autonomously dropped off and picked up using a docking station. We showcase pick-and-place examples in simulation, as well as with the real Gripper MagBot using our inverse kinematics controller. CAD files, assembly instructions, a component list, and videos are available at https://sites.google.com/view/gripper-magbot.

Closest papers

Nearest neighbours by meaning across the whole index.

Magflow: Differentiable Simulation of Industrial-Grade 6D Magnetic Levitation

cs.RO cs.LGeess.SY ·2026-11-17 ·Philipp Hartmann, Jannick Stranghöner, Klaus Neumann
top venuecode/data similarity 0.65
Abstract · 8 pages, 5 figures, 1 table. Accepted for publication in IEEE Robotics and Automation Letters (RA-L). Project page: https://sites.google.com…

Magnetic levitation with six-degrees-of-freedom enables frictionless transport and micrometer-scale positioning in principle, but low-level control is inherently challenging due to its complex and unstable dynamics. Industrial systems typically rely on deep hardware-software co-design, where mover and stator geometries are jointly designed to enable a compact, hand-crafted approximation of the electromagnetic force computation, thereby keeping control computationally tractable at kilohertz rates. However, this approach imposes overly conservative constraints on the operating workspace and the range of supported mover topologies. Instead of reducing the underlying physics to a hand-crafted approximation, we compute the physics directly. We introduce Magflow, a fully differentiable, GPU-parallel simulator for 6D magnetic levitation. It is used to train the first neural controller for an industrial-grade 6D magnetic levitation system that is learned purely from simulated physics. We show that the learned neural controller transfers zero-shot from simulation to real hardware while satisfying hard real-time constraints at 4 kHz. The learned controller achieves qualitatively new behaviors and even levitates a mover topology for which no hand-crafted solution exists. These results demonstrate that co-design is not a physical necessity for 6D magnetic levitation control. More broadly, control learning from simulated physics can find solutions beyond the reach of control engineering in demanding industrial domains. Source code and demonstration videos are publicly available at https://sites.google.com/view/magflow.

0.58

MagServo: Uncertainty-Resilient Hierarchical Magnetic Servoing via Learned Latent Representations

cs.RO ·2026-10-05 ·Yuhan Tan, Yameng Zhang, Pei Liu, Yao Zhong, Zhongliang Jiang
similarity 0.61
Abstract

Magnetic navigation provides contact-free and line-of-sight-independent feedback for robotic systems, yet existing approaches typically rely on explicit pose estimation or direct use of raw magnetic measurements, making accurate control susceptible to modeling errors, measurement noise, and disturbances. This work presents MagServo, a hierarchical learning-based framework for robust 6-DoF magnetic servoing directly using the learned latent magnetic feature. MagServo learns uncertainty-resilient magnetic representations through masked reconstruction and captures state-dependent interaction dynamics between robot motion and latent magnetic transitions without analytical magnetic models or explicit Jacobian supervision. Based on the learned dynamics, a hierarchical controller combines nonlinear model predictive control for coarse approach with local Jacobian inversion for precise fine regulation. Extensive physical experiments demonstrate submillimeter and subdegree accuracy, achieving mean terminal errors of 0.386 mm and 0.479 degree for 6-DoF pose reaching. MagServo further outperforms a localization-based control baseline in complex trajectory tracking and maintains robust performance under unseen magnetic-source configurations without retraining. A supplementary video of the real-robot experiments is available at https://youtu.be/rZt1NUP1Mr0.

0.38

The Cartesian Hand: In-Hand Manipulation with All-Linear Fingers

cs.RO ·2026-09-22 ·Boxi Xia, Bokuan Li, Ryan Shin, Zijiang Yang, Jiaxun Liu +1 more
code/datahot direction similarity 0.57
Abstract · 9 pages, 7 figures

Robotic manipulation has increasingly pursued human-like dexterous hands with many articulated degrees of freedom, offering rich manipulation capabilities at the cost of mechanical and control complexity. At the other extreme, parallel grippers are simple and robust, but provide little ability to manipulate an object after grasping it. Operating articulated objects such as threaded containers, manufacturing tools, and laboratory instruments often requires a second gripper, an external fixture, or coordinated arm motion. We introduce the Cartesian Hand, a 7-DoF end-effector that rethinks dexterous manipulation by combining independent grasping and relative manipulation within a single end-effector using only linear motion. Two independently actuated parallel grippers hold different parts of an object, while four translating fingertips generate relative motion between the grasped parts. Its configuration-independent fingertip kinematics allow manipulation to be composed from simple linear motion primitives. The Cartesian Hand is particularly suited to objects structured around common mechanisms such as threads, pivots, linear guides, plungers, and triggers. We demonstrate cap opening and closing, pipetting, pumping, two-handle manipulation, screwdriving, trigger actuation, and in-grasp reorientation across 35 objects spanning laboratory, manufacturing, and household settings. The same manipulation procedures transfer from a fixed-base robot arm to a humanoid, where we demonstrate bimanual laboratory manipulation using two Cartesian Hands. These results show that versatile in-hand manipulation capability can emerge from a mechanically simple architecture when independent grasping and relative motion are designed directly into the end-effector. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/cartesian_handv1.

0.41

Detachable Wire Drive : Reconfigurable Robot Architecture with Shared Actuators

cs.RO ·2026-08-16 ·Takahiro Hattori, Kento Kawaharazuka, Kei Okada
published similarity 0.56
Abstract · Accepted at IROS2026, website - https://hatofly.github.io/detachable-wire-drive/

Reconfigurable robots offer significant potential for adapting to diverse tasks; however, conventional centralized architectures often require dedicated actuators for each module, leading to substantial increases in overall system weight, volume, and cost. To address these challenges, this paper presents the "Detachable Wire Drive," a reconfigurable robotic system that enables the sharing of heavy and expensive actuators across various morphologies. The core of this system is the "Wire Detach Unit," a mechanism designed to physically split and reconnect wire drive paths, allowing motors to be consolidated into a common base unit. We demonstrate the versatility of this approach by developing a 2-DOF rigid arm, a continuum arm, and two distinct grippers, all of which are interchangeably attached to, and driven by, a single shared actuator set. Experimental results validate the mechanical reliability of the detachment process and the control framework's ability to seamlessly manage transitions between configurations, highlighting a path toward more efficient and multi-functional robotic systems.

0.39

Magnet-Aware Control of Legged Robots

cs.RO ·2026-10-06 ·J. Playan Garai, S. B. Djuve, C. McGreavy, M. Khadiv
similarity 0.55
Abstract

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

0.28

A Conveyor Belt Mechanism for Repositionable Magnetic Coupling Between Continuum Robots

cs.RO ·2026-10-29 ·Ella Walsh, Eric Diller, Jessica Burgner-Kahrs
similarity 0.55
Abstract · 7 pages, 10 figures

This work proposes a novel conveyor belt mechanism enabling continuous, active repositioning of functional elements along the body of a tendon-driven continuum robot. Up to three conveyor belt mechanisms are integrated within a 9 mm diameter continuum robot. We demonstrate equivalent or reduced conveyor belt actuation forces compared to robot tendon actuation forces. As a case study, we mount permanent magnets along two conveyor belts, and demonstrate actively reconfigurable inter-robot coupling. Coupling point location and quantity can be adjusted during robot operation to actively tune the effective stiffness of the coupled multi-robot system. We show that effective stiffness follows a predictable inverse-cubic relationship with coupling location, and increases with the number of coupling points. These findings demonstrate that the conveyor belt mechanism enables active functional element repositioning for changing tasks requirements, with magnetic inter-robot coupling as one proof-of-concept.

0.28

Suspended-Fabric Robotic Manipulation Surfaces: Modelling, Design Space, and Multimodular Extensio

cs.RO ·2026-10-30 ·Pratik Ingle, Jørn Lambertsen, Kasper Støy, Andres Faiña
similarity 0.55
Abstract

Robotic Manipulation Surfaces (RMS) reposition objects by deforming the surface on which they rest. A recent class of RMS suspends a continuous fabric sheet from a sparse grid of vertical linear actuators lowering the actuator density of such surfaces but how to design such surfaces so that objects can be controlled everywhere on it, and how to extend it beyond a single module so that objects can pass between modules and achieve parallel, remain open. This paper presents a separable catenary model of the suspended sheet that is fast to compute and provides both the surface shape for given actuator heights and the actuator heights for a desired local slope. The closed form inverse lets a simple PID controller position objects on the sheet, and the model relates fabric length, module span and actuator stroke to the reachable workspace, yielding a minimum fabric length bound and design charts for these surfaces. The approach is then extended to a multimodular platform in which neighbouring modules share actuators. On a $2 \times 2$ prototype, we demonstrate that centimetre-scale objects are transferred between modules and positioned within 0.03 m over a $1 m^2$ workspace with only nine actuators, enabling multi-object manipulation and opening the way to parallel manipulation.

0.21

ARTiS: An Adaptive Robotic Gripper for Enhanced Tool Manipulation in Disassembly Applications

cs.RO ·2026-09-03 ·Roman Mykhailyshyn, Yukiyasu Domae, Kensuke Harada
top venue similarity 0.55
Abstract

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

0.30