CS Paper Radar

Magnet-Aware Control of Legged Robots

J. Playan Garai, S. B. Djuve, C. McGreavy, M. Khadiv

cs.RO ·submitted 2026-10-06 16:38 UTC · v1

Abstract

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

Closest papers

Nearest neighbours by meaning across the whole index.

MagServo: Uncertainty-Resilient Hierarchical Magnetic Servoing via Learned Latent Representations

cs.RO ·2026-10-05 ·Yuhan Tan, Yameng Zhang, Pei Liu, Yao Zhong, Zhongliang Jiang
similarity 0.67
Abstract

Magnetic navigation provides contact-free and line-of-sight-independent feedback for robotic systems, yet existing approaches typically rely on explicit pose estimation or direct use of raw magnetic measurements, making accurate control susceptible to modeling errors, measurement noise, and disturbances. This work presents MagServo, a hierarchical learning-based framework for robust 6-DoF magnetic servoing directly using the learned latent magnetic feature. MagServo learns uncertainty-resilient magnetic representations through masked reconstruction and captures state-dependent interaction dynamics between robot motion and latent magnetic transitions without analytical magnetic models or explicit Jacobian supervision. Based on the learned dynamics, a hierarchical controller combines nonlinear model predictive control for coarse approach with local Jacobian inversion for precise fine regulation. Extensive physical experiments demonstrate submillimeter and subdegree accuracy, achieving mean terminal errors of 0.386 mm and 0.479 degree for 6-DoF pose reaching. MagServo further outperforms a localization-based control baseline in complex trajectory tracking and maintains robust performance under unseen magnetic-source configurations without retraining. A supplementary video of the real-robot experiments is available at https://youtu.be/rZt1NUP1Mr0.

0.38

Task-Space Motion-Force Nonlinear Model Predictive Control for Precise and Compliant Control under Uncertainties

cs.RO ·2026-10-12 ·Quang-Nam Nguyen, Ludovic Righetti
hot direction similarity 0.60
Abstract

In Nonlinear Model Predictive Control (NMPC), the control law is implicitly determined by the solution of an Optimal Control Problem (OCP). Consequently, OCP design is often tailored to specific platforms and tasks, demanding extensive expert knowledge and tuning effort. To address this, we propose a unified NMPC framework that directly plans and controls the robot joints subject to task-space motion and force requirements and is capable of seamlessly generalizing across multiple robotic platforms and diverse tasks. Furthermore, optimization-based methods often treat interactions as rigid contacts, making the torque solution sensitive to the modeling errors of the robot dynamics and the environment. We study the intrinsic task-space impedance of our proposed controller, its partial contraction for differential stability and differential passivity under unmodeled interactions. As a result, our framework enables closing the force-feedback loop in the high-level planning layer to achieve precise motion-force tracking performance, addressing the long-standing challenge of force-feedback NMPC. Finally, we validate our framework on physical hardware, demonstrating hybrid motion-force control on a redundant manipulator and compliant locomotion on a quadruped, while preserving core NMPC advantages such as hard constraint satisfaction, optimal redundancy exploitation, and real-time planning under unforeseen interactions.

0.42

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.60
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Data Driven Modeling of a Magnetic Newton's Cradle using the Optimization of a Discrete Loss

cs.CE physics.class-phphysics.comp-ph ·2026-10-29 ·Dimitris Koumoutsakos, Sergey Litvinov
similarity 0.58
Abstract · 30 pages, 19 figures, 8 tables

We investigate the dynamics of a magnetic Newton's cradle (MNC) using experiments, simulations through forward and inverse data driven models. In the MNC magnetic forces replace the instantaneous elastic collisions of the classical design. We compare point-dipole and finite-current-loop interaction models, identifying their parameters from direct measurements as well as through pendulum trajectories using the method of Optimizing a Discrete Loss (ODIL). For a synthetic three-pendulum twin, ODIL reproduces discretized trajectories to round-off accuracy and infers accurately magnet strength and damping from sparse data even when only one pendulum is observed. Model comparison shows that the point-dipole model compensates for near-field errors by underestimating the magnetic moment and produces structured residuals at each momentum transfer. The current-loop model removes this bias and, on full-precision recordings, also recovers the magnet radius. The continuous magnetic coupling reproduces the classical cradle's key behavior while enabling richer dynamics, including $N$ normal modes and a static repulsion offset. These results demonstrate that ODIL can infer physical parameters, and quantify model-form errors from sparse, noisy observations. Ultimately, this work establishes the magnetic Newton's cradle not merely as a physical curiosity, but as a rigorously quantifiable testbed for computational inverse modeling.

0.29

MagCilia: A Compact Magnetociliary Tactile Sensor with 3D Force Sensing for Robotic Contact Perception and Grasping Feedback

cs.RO ·2026-10-07 ·Yu Feng, Hao Wu, Haotian Guo, Haoming Liu, William Su +5 more
highly cited similarity 0.58
Abstract

Robotic grasping and surface exploration benefit from simultaneous measurement of normal and tangential forces and from surface information obtained through contact. Here, we present a compact magnetociliary tactile sensor (MagCilia) that combines a flexible magnetic-cilia structure with a Hall sensor for 3D force sensing. Quasi-static finite element analysis is used to investigate structural deformation and magnetic responses under multidirectional loading. To reconstruct forces from the coupled magnetic channels, we propose causal history fusion regression (CHFR), which combines current magnetic-field measurements with their recent changes. Five-fold cross-validation grouped by calibration record yields root-mean-square errors of 0.40, 0.57, and 0.69 N for Fx, Fy, and Fz, respectively, with corresponding coefficients of determination of 0.93, 0.90, and 0.92. Robotic experiments demonstrate tangential-force-guided gripper adjustment and multi-axis load monitoring under external perturbations. Frequency-domain features of the reconstructed forces distinguish six surface categories with 99.39% accuracy in three-fold cross-validation grouped by acquisition session. An online robotic demonstration additionally identifies all six tested surfaces. These results demonstrate 3D force reconstruction, grasping feedback, and surface recognition using a single compact tactile unit.

0.58

Orientation Control of Soft Robots via Adiabatic Spectral Submanifolds

cs.RO eess.SY ·2026-09-13 ·Aron Karakai, Roshan S. Kaundinya, Mike Yan Michelis, Robert Katzschmann, George Haller
published similarity 0.57
Abstract · This paper has been accepted for presentation at the 2026 IEEE Conference on Decision and Control (CDC)

Soft robots are commonly sought for safety-critical interactions in delicate environments, where accurate position and orientation control is imperative. Model predictive control (MPC) offers a solution, but it requires a model of the robot's infinite-dimensional nonlinear dynamics that is at once accurate and computationally cheap. Recent theory on adiabatic spectral submanifolds (aSSMs) and their applications to soft robots provide data-driven model-reduction methods to construct such models. Here, we extend these methods to identify aSSMs from enlarged observable datasets and upgrade the currently available aSSM-MPC schemes. Evaluated on a high-fidelity finite-element simulation of a pressure-actuated soft arm, our controller reduces position and orientation tracking error by more than 60% compared to existing data-driven baselines.

0.47

Adaptive-MHE : A Sampling-Based Adaptive MPC for Legged Loco-Manipulation via Moving Horizon Estimation

cs.RO ·2026-09-15 ·Hossein Keshavarz, Alejandro Ramirez-Serrano, Majid Khadiv
similarity 0.56
Abstract

Legged robots have demonstrated a remarkable ability to traverse various terrains, yet generating effective loco-manipulation behaviors remains challenging. A key difficulty is that object and terrain parameters are typically unknown to the robot, and mismatches between these parameters and their simulated counterparts introduce a sim-to-real gap that degrades control performance. Classical system identification (Sys-ID) methods often assume differentiable dynamics, an assumption that does not hold for contact-rich legged systems. Sampling-based Sys-ID avoids this restriction by directly matching simulated and recorded state trajectories through massively parallel rollouts, but existing approaches are typically applied offline and do not adapt as environmental conditions change. We present Adaptive-MHE an online sampling-based Sys-ID framework, based on moving horizon estimation (MHE), that estimates the physical parameters of objects and terrain in the environment (e.g., mass, friction) and couples this estimate with a sampling-based model predictive controller, enabling adaptive loco-manipulation in changing and uncertain environments. In simulation and hardware experiments, our framework consistently outperforms baselines and matches the performance of a controller with access to ground-truth parameters.

0.26

Moving Horizon Estimation and Constrained Model Predictive Control for Balancing a Wheel-Legged Robot Under Unknown Disturbances

eess.SY ·2026-11-03 ·Haitham El-Hussieny
similarity 0.56
Abstract

Wheel-legged robots balance on two wheels while using articulated legs to change height, absorb impacts, and cross uneven terrain. On hardware, the balance controller must rely on noisy inertial and encoder measurements, and it must reject disturbances that are not known in advance, such as payloads and wind, without exceeding motor torque limits. This paper presents a moving horizon estimator (MHE) combined with an offset-free, constrained model predictive controller (MPC) for the sagittal balance of a 9.95 kg wheel-legged robot. The estimator uses a virtual-leg model augmented with a horizontal hip force, a body pitch torque, and a gyroscope bias. Its accelerometer model removes the predicted hip acceleration, and its process noise is increased when an impact is detected. We evaluate the approach in MuJoCo with simulated sensor noise, bias, quantization, and delay, and compare it with LQR baselines that use ground-truth state, a complementary filter, or the same MHE. In a driving, squatting, reversing, and bowing sequence, MPC with MHE reduced the RMS speed error to 0.11 m/s, compared with 0.24 m/s for LQR with ground-truth state. Under an unknown 2 kg payload and a 10 N headwind, the mean position error in wind was 6 cm, compared with 81 cm for LQR with ground-truth state. Across a 3 $\times$ 4 grid of payloads and headwinds, LQR with the same estimator fell in 3 of 12 combinations, compared with 1 of 12 for MPC. These results are limited to simulation on flat ground, and experimental validation on hardware remains future work.

0.14