CS Paper Radar

Data Driven Modeling of a Magnetic Newton's Cradle using the Optimization of a Discrete Loss

Dimitris Koumoutsakos, Sergey Litvinov

cs.CE physics.class-phphysics.comp-ph ·submitted 2026-10-29 00:41 UTC · v1

Abstract

We investigate the dynamics of a magnetic Newton's cradle (MNC) using experiments, simulations through forward and inverse data driven models. In the MNC magnetic forces replace the instantaneous elastic collisions of the classical design. We compare point-dipole and finite-current-loop interaction models, identifying their parameters from direct measurements as well as through pendulum trajectories using the method of Optimizing a Discrete Loss (ODIL). For a synthetic three-pendulum twin, ODIL reproduces discretized trajectories to round-off accuracy and infers accurately magnet strength and damping from sparse data even when only one pendulum is observed. Model comparison shows that the point-dipole model compensates for near-field errors by underestimating the magnetic moment and produces structured residuals at each momentum transfer. The current-loop model removes this bias and, on full-precision recordings, also recovers the magnet radius. The continuous magnetic coupling reproduces the classical cradle's key behavior while enabling richer dynamics, including $N$ normal modes and a static repulsion offset. These results demonstrate that ODIL can infer physical parameters, and quantify model-form errors from sparse, noisy observations. Ultimately, this work establishes the magnetic Newton's cradle not merely as a physical curiosity, but as a rigorously quantifiable testbed for computational inverse modeling.

Comment
30 pages, 19 figures, 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Magnet-Aware Control of Legged Robots

cs.RO ·2026-10-06 ·J. Playan Garai, S. B. Djuve, C. McGreavy, M. Khadiv
similarity 0.58
Abstract

Autonomous robots can increase uptime and reduce human exposure in Big Science facilities, but strong magnetic fields needed for their operation corrupt sensors and induce pose-dependent mechanical wrenches that destabilize robots and challenge conventional reactive controllers. This paper presents a control framework for modeling, estimating, and dynamically compensating for spatially varying magnetic wrenches acting on legged robots to improve robustness in these fields. We introduce a custom physics plugin for the MuJoCo simulator to model magnetic forces on rigid-body elements, alongside an inverse field-estimation framework to infer the latent magnetic field directly from quadruped dynamic responses and any number of sensor readings. Furthermore, we develop a Magnet-Aware Model Predictive Control (MPC) and Whole-Body Control (WBC) architecture that predicts and counteracts magnetic perturbations during locomotion to increase the range of magnetic fields in which the robot can operate. The effectiveness of the framework is validated through both simulation and physical hardware experiments. We show our method increases the the maximum rejectable disturbances from magnetic field in the force space by a factor of 2.5 and and between 1.6-2 times in torque space compared to a non-compensated system. Within the proposed magnetic field, this constitutes an increase in the area in which the robot can operate by 29,34% of which 10,84% would have previously caused an immediate collapse to non-compensated controllers.

0.28

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.53
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

MagCilia: A Compact Magnetociliary Tactile Sensor with 3D Force Sensing for Robotic Contact Perception and Grasping Feedback

cs.RO ·2026-10-07 ·Yu Feng, Hao Wu, Haotian Guo, Haoming Liu, William Su +5 more
highly cited similarity 0.51
Abstract

Robotic grasping and surface exploration benefit from simultaneous measurement of normal and tangential forces and from surface information obtained through contact. Here, we present a compact magnetociliary tactile sensor (MagCilia) that combines a flexible magnetic-cilia structure with a Hall sensor for 3D force sensing. Quasi-static finite element analysis is used to investigate structural deformation and magnetic responses under multidirectional loading. To reconstruct forces from the coupled magnetic channels, we propose causal history fusion regression (CHFR), which combines current magnetic-field measurements with their recent changes. Five-fold cross-validation grouped by calibration record yields root-mean-square errors of 0.40, 0.57, and 0.69 N for Fx, Fy, and Fz, respectively, with corresponding coefficients of determination of 0.93, 0.90, and 0.92. Robotic experiments demonstrate tangential-force-guided gripper adjustment and multi-axis load monitoring under external perturbations. Frequency-domain features of the reconstructed forces distinguish six surface categories with 99.39% accuracy in three-fold cross-validation grouped by acquisition session. An online robotic demonstration additionally identifies all six tested surfaces. These results demonstrate 3D force reconstruction, grasping feedback, and surface recognition using a single compact tactile unit.

0.58

Physics-Constrained Neural Flow Maps for Long-Horizon Prediction of Spin Dynamics

cs.LG cond-mat.mes-hall ·2026-08-22 ·Haoen Feng, Shenglan Yuan, Shirong Lin
similarity 0.51
Abstract

Conventional simulation of current-driven magnetization relies on fine-step integration of the spin-transfer-torque Landau--Lifshitz--Gilbert equation, creating a computational bottleneck in parameter sweeps and control searches. In this work, we propose a physics-constrained neural flow map that learns finite-time dynamics directly on the unit sphere. The model maps the current magnetization, spin-torque strength, and requested time span to a future state in a single forward pass. Tangent-space projection and spherical retraction preserve unit magnetization during recursive, composition-consistent rollout. We validate the framework on single-spin trajectories under in-domain torques and previously unseen but stronger drive. Beyond the training horizon, it achieves an in-domain root mean square error of $0.00425$ with norm drift at the $10^{-7}$ level. The flow outperforms an adapted Long Short-Term Memory (LSTM) in in-domain accuracy and geometric stability, although the LSTM retains slightly lower out-of-distribution state error. The resulting geometry-preserving propagator reduces reliance on fine-step integration and enables physically admissible long-horizon prediction.

0.21

MagServo: Uncertainty-Resilient Hierarchical Magnetic Servoing via Learned Latent Representations

cs.RO ·2026-10-05 ·Yuhan Tan, Yameng Zhang, Pei Liu, Yao Zhong, Zhongliang Jiang
similarity 0.50
Abstract

Magnetic navigation provides contact-free and line-of-sight-independent feedback for robotic systems, yet existing approaches typically rely on explicit pose estimation or direct use of raw magnetic measurements, making accurate control susceptible to modeling errors, measurement noise, and disturbances. This work presents MagServo, a hierarchical learning-based framework for robust 6-DoF magnetic servoing directly using the learned latent magnetic feature. MagServo learns uncertainty-resilient magnetic representations through masked reconstruction and captures state-dependent interaction dynamics between robot motion and latent magnetic transitions without analytical magnetic models or explicit Jacobian supervision. Based on the learned dynamics, a hierarchical controller combines nonlinear model predictive control for coarse approach with local Jacobian inversion for precise fine regulation. Extensive physical experiments demonstrate submillimeter and subdegree accuracy, achieving mean terminal errors of 0.386 mm and 0.479 degree for 6-DoF pose reaching. MagServo further outperforms a localization-based control baseline in complex trajectory tracking and maintains robust performance under unseen magnetic-source configurations without retraining. A supplementary video of the real-robot experiments is available at https://youtu.be/rZt1NUP1Mr0.

0.38

Physics-Guided Inferencer-in-the-Loop Digital-Twin for Real-Time Adaptive Emulation of Nonlinear PMSMs

eess.SY ·2026-10-28 ·Songyang Zhang, Yuzhong Zhang, Venkata Dinavahi
similarity 0.50
Abstract

A real-time digital-twin (RTDT) of a permanent magnet synchronous machine (PMSM) allows drive controllers to be tested in hardware-in-the-loop (HIL) before they meet the real machine. Its machine model rests on identified parameters or flux look-up tables (LUTs) from finite-element analysis (FEA) or characterization tests; the maps are regenerated offline when the machine changes, and online estimators track a few parameters such as resistance and PM flux. This article makes the executed model learnable from reference data. A physics-guided machine learning (PGML) network advances the currents and predicts torque in one step, trained with analytical one-step labels. In the proposed Inferencer-in-the-Loop (IIL) architecture, a GPU retrains the network while a field-programmable gate array (FPGA) executes the last accepted weights. For damper circuits, shifted parameters, and an FEA-calibrated saturated machine, one kernel form reaches average normalized mean absolute errors (NMAEs) of 0.19%-0.67% at measured FPGA kernel latencies of 0.30-0.34 $μ$s, and retraining for a shifted machine nears its final loss within 94 s. On a magnetically linear 200-W drive, a residual form corrects the analytical step and learns its physical parameters from operating data; each step takes under 2.5 $μ$s, 20 times faster than real time and ahead of the physical drive's measurements even at 20-kHz sampling. On six held-out runs (1193 s), its $i_q$ error is 5.9%-9.4% of measured RMS, against 10.4%-13.2% for an independently fitted grey-box model, and over 30 min of loaded heating its online-updated heads track a 4.1% winding-resistance rise with an RMS error of 0.44 m$Ω$.

0.29

Damping Oscillations in a Spherical Pendulum Inclinometer Using Vector-Based Control

eess.SY ·2026-08-31 ·Fernando Capes, Mikael Andreas Bianchi, Roberto Gardenghi, Manuel Alò
similarity 0.50
Abstract

This paper addresses disturbance-induced oscillations in high-precision pendulum-based inclinometers, which reduce measurement availability despite the long-term stability of gravity-referenced sensing. To actively suppress these oscillations, a contactless six-coil electromagnetic actuation system is developed, together with a control framework that generates, in real time, the planar damping force required by the controller despite the nonlinear, unilateral, and bounded nature of magnetic actuation. The proposed approach combines a control-oriented nonlinear model of the spherical pendulum, observer-based feedback control, and a constrained force-allocation scheme that maps the desired vector force into feasible coil currents. Experimental validation on a prototype demonstrates attenuation of the dominant oscillatory mode up to 31.11 dB and a marked reduction in transient duration, with the 50\% decay time decreasing from 11.10 s without control to 1.01 s at the most favorable operating point. The results also highlight a trade-off between transient speed and residual oscillation, demonstrating both the effectiveness of the proposed damping strategy and its value as a practical design framework for high-precision inclinometer systems.

0.25

Magflow: Differentiable Simulation of Industrial-Grade 6D Magnetic Levitation

cs.RO cs.LGeess.SY ·2026-11-17 ·Philipp Hartmann, Jannick Stranghöner, Klaus Neumann
top venuecode/data similarity 0.49
Abstract · 8 pages, 5 figures, 1 table. Accepted for publication in IEEE Robotics and Automation Letters (RA-L). Project page: https://sites.google.com…

Magnetic levitation with six-degrees-of-freedom enables frictionless transport and micrometer-scale positioning in principle, but low-level control is inherently challenging due to its complex and unstable dynamics. Industrial systems typically rely on deep hardware-software co-design, where mover and stator geometries are jointly designed to enable a compact, hand-crafted approximation of the electromagnetic force computation, thereby keeping control computationally tractable at kilohertz rates. However, this approach imposes overly conservative constraints on the operating workspace and the range of supported mover topologies. Instead of reducing the underlying physics to a hand-crafted approximation, we compute the physics directly. We introduce Magflow, a fully differentiable, GPU-parallel simulator for 6D magnetic levitation. It is used to train the first neural controller for an industrial-grade 6D magnetic levitation system that is learned purely from simulated physics. We show that the learned neural controller transfers zero-shot from simulation to real hardware while satisfying hard real-time constraints at 4 kHz. The learned controller achieves qualitatively new behaviors and even levitates a mover topology for which no hand-crafted solution exists. These results demonstrate that co-design is not a physical necessity for 6D magnetic levitation control. More broadly, control learning from simulated physics can find solutions beyond the reach of control engineering in demanding industrial domains. Source code and demonstration videos are publicly available at https://sites.google.com/view/magflow.

0.58