CS Paper Radar

Adaptive Line Switching for Cascade Mitigation in Power Systems via Graph Reinforcement Learning

Naeem Md Sami, Soumav Biswas, Mia Naeini

eess.SY ·submitted 2026-11-17 19:24 UTC · v1

Abstract

Although cascading failures are relatively rare events in power systems, they pose significant risks and can lead to severe economic and societal consequences within a short period. Therefore, developing effective mitigation strategies to prevent cascade propagation and to minimize their impacts is essential. This paper presents a deep reinforcement learning (DRL)-based framework for adaptive transmission line switching to mitigate cascading failures. Given the important role of network topology and component interactions in cascading failure propagation in power systems, graph-based DRL approaches, including Graph-DQN, Graph-A2C, and Graph-PPO frameworks, are developed to capture and utilize the topological information of power systems. The proposed frameworks are evaluated on the IEEE 39, 57, and 118 bus systems and benchmarked against the unmitigated case, random and heuristic-based switching strategies as baselines, as well as their corresponding graph-agnostic DRL counterparts. The results demonstrate the importance of incorporating graph information into these mitigation frameworks, leading to reduced cascade size, load loss, and network clustering.

Closest papers

Nearest neighbours by meaning across the whole index.

TANGCO: Learning Topology-Aware Capacity Allocation for Overload-driven Cascading Failures

cs.LG cs.SI ·2026-08-13 ·Orkun Irsoy, Leman Akoglu, Osman Yagan
similarity 0.68
Abstract

Networked systems, from power grids to traffic networks and cloud clusters, carry loads across nodes with limited capacity. A node whose load exceeds its capacity fails and sheds its load onto its neighbors, which can trigger a system-wide cascade. We study how to allocate a fixed capacity budget across nodes to resist these cascades under local load redistribution. The problem is difficult because no optimal allocation is known, and the fail-or-survive objective is non-differentiable and piecewise constant, so exact and gradient-based optimization methods do not directly apply. We introduce TANGCO (Topology-Aware Neural Graph-Guided Capacity Optimization), which uses a graph neural network policy trained through the cascade simulator with policy-gradient learning and a heuristic anchor. We evaluate TANGCO on five synthetic graph families and five real networks spanning power, road, air, and Internet topologies. The learned policy improves on the best of four hand-designed heuristics in all 450 synthetic instances and in 40 of 45 real-network conditions, with robustness gains ranging from 1.6% to 246%. The learned policies transfer to unseen graphs within a family and partially across related topologies, and TANGCO$^{pre}$, pre-trained on synthetic graphs, matches per-network training on unseen real networks. Training scales near-linearly with graph size, and TANGCO$^{pre}$ allocates on a new network with no per-target training, matching the deployment cost of a hand-designed heuristic. Free-vector variants without the GNN, stay close to the heuristics, so the graph representation carries the gain beyond numerical search. Finally, analysis of the learned allocations identifies when local risk is sufficient, leads to an improved closed-form heuristic, and reveals the regimes where a topology-aware learned policy remains necessary.

0.04

Graph Machine Learning: An Opportunity for Power Systems

cs.LG cs.AIcs.CEeess.SY ·2026-08-17 ·Martin Sadric, Sebastian Pütz, Christian Nauck, Veit Hagenmeyer, Frank Hellmann +2 more
surveybenchmark similarity 0.68
Abstract

Modern power systems face growing operational complexity driven by the integration of renewable energy sources, decentralization, and the need for real-time decision-making across a wide range of timescales. Addressing these challenges traditionally relies on model-based methods that, while accurate, can be too slow for operational demands. Machine learning (ML) has therefore emerged as a faster, data-driven alternative. As grid topology plays a central role in power system operation, graph machine learning (GML) methods offer a natural framework for incorporating topological dependencies as an inductive bias. We survey nearly 800 papers at the intersection of GML and power systems, covering forecasting, state estimation, optimization, control, fault diagnosis, and cybersecurity. Power systems constitute an unusually rich benchmark setting for GML, as they combine hard physical constraints, multi-scale dynamics, safety-critical requirements, and scarce labeled data within a single, well-defined domain. Conversely, power systems can benefit from utilizing GML to complement classical solvers, as GML provide scalable, topology-aware approximations with promising generalization and computational efficiency. We identify open challenges, including limited real-world deployment and the need for interpretable models in safety-critical settings. Despite the rapidly growing number of publications, standardized benchmarks and open datasets remain scarce, leaving many results difficult to reproduce and undermining the long-term scientific credibility of the field. We further derive a structured requirements catalog for ML-ready power grid benchmarks, intended to guide future dataset development and improve reproducibility across studies. We call on the community to prioritize dedicated benchmark studies and the release of open datasets and models.

0.23

Physics-Informed Graph-Based Safe RL with Constraint-Specific Critics for Community Battery Coordination in Distribution Network

cs.AI eess.SYmath.OC ·2026-10-24 ·Chenghao Huang, Yue Yang, Hao Wang
top venue similarity 0.67
Abstract

High penetrations of distributed energy resources (DERs) and fast-varying electric vehicle (EV) charging intensify voltage and line-limit violations in distribution networks (DNs), making safe, low-cost operation increasingly challenging. This paper proposes a physics-informed safe deep reinforcement learning (DRL) framework for coordinating community battery energy storage systems to mitigate constraint violations while minimizing operating cost. To represent nonlocal spatiotemporal interactions, we develop a dual-level physics-informed graph representation in which line impedance and capacity shape spatial information propagation, while power-balance, voltage-profile, and flow-reconstruction losses regularize the latent state toward control-relevant physical consistency. Building on this representation, we develop Lagrangian Dedicated-Critic PPO (LDCPPO), which implements constraint-specific value decomposition: independent reward and cost critics preserve heterogeneous voltage- and line-loading-related learning signals and combine their advantages only during the Lagrangian policy update. Case studies on DNs with high rooftop photovoltaic penetration and EV charging demonstrate that the proposed method reduces the key voltage-violation degree by up to 80.5% compared with the tested baselines, while also achieving the lowest voltage-violation count and line-overload degree with competitive operating cost.

0.31

A Comparative Study of Graph Representations for GNN-Based Power Grid Control in L2RPN

cs.LG ·2026-09-02 ·Adrian Degenkolb, Qiong Huang, Benjamin Schäfer
similarity 0.66
Abstract · 5 pages, 5 figures. Submitted to IEEE PES International Meetings 2027

Graph construction is a critical but underexamined design choice in deep reinforcement learning for power grid control. We present a controlled experimental comparison of different graph representations, including physical topology, electrical-sensitivity, and hybrid variants for topology control in the Learning to Run a Power Network (L2RPN) environment. Our findings indicate that matching graph complexity to task granularity is more important than maximizing representational richness, and highlight the importance of controlled representation studies at scale.

0.47

Foundation Models Meet Power Grid Topology for Cascade Prediction

eess.SY ·2026-10-23 ·Soumav Biswas, Mia Naeini
similarity 0.63
Abstract · 10 pages

Accurate early-stage prediction of cascading failure severity is essential for assessing the vulnerability of power transmission networks. However, existing data-driven approaches often rely on network-specific representations, limiting their generalizability across power system topologies. This work investigates the complementary capabilities of Large Language Models (LLMs) and Graph Neural Networks (GNNs) for cascading failure severity prediction. First, standalone LLM predictors are developed using a LoRA-fine-tuned LLaMA-3-8B-Instruct model with varying degrees of topological information. A hybrid Graph-LLM fusion framework is then proposed, integrating a Topology-Aware Graph Attention Transformer (TAGAT) with the LLM through confidence-gated fusion. TAGAT captures structural dependencies among transmission lines, while the LLM extracts representations from early-stage power-flow observations and aggregated cascade descriptors. The frameworks are evaluated on 30,000 simulated cascading failure scenarios for each of the IEEE 118-bus and IEEE 300-bus systems. Using only the first four cascade steps, the hybrid framework achieves weighted F1 scores of 0.94 and 0.92, respectively. In cross-system transfer from IEEE 118-bus to IEEE 300-bus, it achieves 0.72 zero-shot accuracy, improving to 0.83 with limited target-system calibration, outperforming standalone models and conventional baselines. These results show the potential of combining graph-based structural learning with foundation models to improve cascading failure severity prediction and cross-system transferability.

0.24

Counterfactual Action-Conditioned Graph Prediction for Cascading-Failure Mitigation in Power Systems

eess.SY ·2026-10-12 ·Fangxin Liu, Zhentao Tian
similarity 0.62
Abstract

Cascading failures develop through coupled power flow redistribution, protection actions, and topology changes, making remedial control dependent on how alternative interventions modify the subsequent trajectory. This paper develops an action-conditioned graph predictor (ACGP) for multi-step cascade prediction and closed-loop mitigation. A same-state counterfactual branching procedure replays identical post-contingency grid states under multiple legal actions while preserving the exogenous trajectory, providing direct supervision for action-dependent electrical states, line connectivity, automatic protection trips, and terminal risk. ACGP is embedded in a receding-horizon controller that evaluates five-step candidate futures, executes the selected intervention, and replans from the observed next state. The final dataset contains 2,860 counter factual roots and 22,880 action-conditioned branches. On the held-out test set, ACGP achieves a five-step line-loading MAE of 0.0369 and a redispatch pairwise ranking accuracy of 0.806; action ablations reduce the ranking accuracy to approximately chance level. In closed-loop Grid2Op experiments, terminal-failure and cascade rates decrease from 53.3% and 51.1% under do-nothing operation to 12.2% and 7.8%, respectively, close to the simulator-reference values of 11.1% and 6.7%. The results show that same-state counterfactual prediction can support effective action comparison and feedback-based cascading-failure mitigation.

0.22

Detecting False Data Injection and Unstable Operation in Smart Grid via System-Aware Graph Boundary Learning

cs.CR ·2026-09-28 ·Emad Efatinasab, Denis Donadel, Mirco Rampazzo, Chuadhry Mujeeb Ahmed
similarity 0.62
Abstract

Cyber-physical power systems increasingly rely on data-driven tools to detect instability and support reliable grid operation. However, reliable stability prediction is difficult when unstable operating configurations are rare, sensitive, or unavailable during model development, since collecting such data safely and at scale is often impractical. At the same time, False Data Injection (FDI) attacks can manipulate reported system parameters to trigger false instability alarms or conceal unsafe operation, and such threats in Decentral Smart Grid Control (DSGC) systems remain largely unexplored. These challenges are rarely addressed jointly, leaving a gap between stability prediction and attack detection that this work aims to close. In this paper, we introduce StarGNN, a graph learning framework that learns the stable operating region exclusively from clean stable configurations and uses a single abnormality score to flag reported configurations that should not be trusted as evidence of safe operation, covering both genuine instability and unseen FDI manipulations. Each configuration is represented as a producer-consumer star graph and processed by a role aware graph neural network, with physics constrained pseudo-negatives generated by perturbing reaction time and price response parameters standing in for the unavailable unstable and attack data. A single threshold, calibrated only on held-out stable data, is used without task or attack specific adjustment. Evaluated on nine unseen FDI scenarios, StarGNN detects between 0.780 and 0.973 of attacks on stable configurations and retains a post attack instability recall between 0.972 and 0.999 on unstable ones, with 0.899 recall against a stronger adaptive attacker, showing that stable-only boundary learning can support both stability prediction and attack detection without access to genuine unstable labels or attack samples during training.

0.13

PhyPro-FM: A Physics and Prompt-Guided Graph Foundation Model for Contingency Analysis

eess.SY cs.AIcs.LG ·2026-10-19 ·Xu Yang, Zhanyuan Sheng, Chenhui Lin, Haotian Liu, Qi Wang +2 more
similarity 0.60
Abstract

The continuous evolution of next-generation power systems, characterized by the high penetration of renewable energy resources and dynamic topology variations, poses formidable challenges to traditional N-1/N-2 contingency analysis in terms of computational efficiency and scalability. While deep learning-based methods offer accelerated inference, existing studies predominantly treat contingency analysis as a pure regression problem, often overlooking the physical essence of grid operation and engineering requirements of real-world scenarios. To bridge this gap, this paper proposes a physics and prompt-guided graph foundation model (PhyPro-FM) for generalizable and engineering-viable contingency analysis. The proposed architecture integrates graph neural networks with a learnable global query mechanism and, notably, introduces a prompt-guided learning paradigm. By leveraging historical snapshots as few-shot prompts, the model dynamically captures correlations between target and historical operating conditions, significantly enhancing generalization capabilities under unseen topologies. Furthermore, we design a physics-informed training mechanism that prioritizes branch power flow errors over nodal voltage errors, aligning the optimization objective with critical grid security constraints. To ensure engineering applicability, a physics-informed inference mechanism is also developed, incorporating a residual-based correction module and a specialized post-processing strategy for singular branches to circumvent numerical instability. Comprehensive experiments demonstrate that PhyPro-FM outperforms state-of-the-art methods in accuracy and generalization, validating its superior physical consistency and robustness for practical engineering applications.

0.18