CS Paper Radar

Trust the Ray, Not the Depth: Ray-Lateral Agreement for Multi-View 3D Human Pose Fusion

Farnoosh Koleini, Ahmed Helmy, Pu Wang, Xiwu Cao

cs.CV ·submitted 2026-11-17 21:05 UTC · v1
benchmarkhot direction

Abstract

Put a monocular mesh estimator behind every camera of a calibrated rig, and the reconstructed bodies land a meter or more apart. The cause is geometric: each estimate sits at the depth implied by a focal length the network assumed, not the one the camera has. Its error therefore points almost entirely along its own viewing ray, and the calibration tells us that direction exactly. To address this, we introduce the Ray-Lateral Agreement (RLA), which follows one rule: trust the ray, not the depth. RLA first slides every estimate along its own rays, which removes the depth bias and leaves the shape untouched. It then fuses the views one point at a time, under a Gaussian error whose precision follows each viewing ray. The maximum-likelihood solution is closed-form, interpolates between averaging and midpoint triangulation, and stays well conditioned where triangulation is singular. Robustness is the harder half, because correct views also disagree along their rays. Any weight built on the full residual therefore punishes good views together with bad ones. Ray-lateral agreement instead scores every view, at every point, by its residual across that view's own ray alone. We evaluated RLA on multi-camera public benchmark datasets. Across two, three, and four cameras and three per-view pose estimators, RLA consistently achieves lower worst-case error than all triangulation baselines.

Comment
10 pages, 5 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

OmniRay: Camera-Agnostic Monocular 3D Reconstruction with Composite Ray Fields

cs.CV ·2026-10-22 ·Namitha Guruprasad, Abhay Yadav, Cheng Peng, Rama Chellappa, Anand Bhattad
positioncode/data similarity 0.68
Abstract · Project page: https://nam1410.github.io/omniray/

Monocular models recover 3D geometry from a single image in one pass, but most assume a pinhole camera and produce distorted geometry on the wide-angle imagery produced by fisheye and panoramic lenses. Camera-aware models remove this assumption by predicting a per-pixel ray field. However, they represent different camera geometries using a single fixed basis to capture both the overall camera projection and its finer variations. We argue that camera geometry can be viewed as having a hierarchy of complexity for representing rays. We present OmniRay, a feed-forward model whose Ray Module is composed of three components: a monotone radial base that captures radially symmetric structure, a spherical-harmonic residual for smooth deviations from it, and a free-form residual for remaining local variation. These components are composed as successive rotations on the sphere, allowing the representation to accommodate diverse camera geometries. Given a single image, OmniRay predicts a ray direction and an up-to-scale radial distance for every pixel, from which a 3D point cloud is recovered without needing camera information at inference time. Extensive experiments across different camera configurations demonstrate that OmniRay establishes a new state-of-the-art in camera-agnostic monocular 3D reconstruction.

0.20

MEOM: Multi-View Expected-OKS Maximization for Human Pose Triangulation

cs.CV ·2026-08-31 ·Ziliang Xiong, Henglin Shi, Per-Erik Forssen
similarity 0.67
Abstract

Conventional algebraic triangulation solves 3D human pose estimation (HPE) from multi-view 2D keypoints. The typical approach, decoding 2D keypoints from predicted heatmaps, is unreliable as heatmaps can be multimodal under occlusion, and collapsing them into single peaks discards their spatial distribution. We seek to use the entire heatmap to estimate 3D poses more accurately, which requires solving two problems: how to robustly fuse heatmaps across views, and how to assess the reliability of heatmaps. For the former, we introduce a novel objective, Multi-viewExpected-OKS Maximization (MEOM), that locates a 3D joint where the views agree in probability mass. For the latter, we adopt highest-density-region (HDR) calibration as a diagnostic of that mass, independently of distance-based metrics. The proposed framework covers two settings, with and without 3D supervision. Without 3D supervision, we optimize 3D poses from pretrained heatmap predictors by maximizing MEOM, achieving comparable performance with state-of-the-art methods that rely on larger backbones, temporal fusion, and simulated 3D data. On ambiguous Human3.6M (H36MA) and occluded CMU Panoptic frames, the advantage is substantial. When 3D labels are available, we train the model end-to-end with a combined MEOM and MSE loss, achieving 19.11 mm absolute MPJPE on Human3.6M outperforming the state-of-the-art volumetric approach on absolute MPJPE at half the inference cost.

0.24

Any3R: Feedforward 3D Reconstruction from Any Camera Type

cs.CV ·2026-10-26 ·Jingong Chen, Qingwen Zhang, Youming Deng, Chulwoo Pack, Olaf Wysocki +3 more
benchmarkcode/data similarity 0.67
Abstract

Geometry foundation models recover camera poses and dense geometry from a set of images with a feed-forward network, but they expect pinhole images. That assumption is inside the backbone too: the positional encoding and the training loss both bind an image position to a direction in space, and both depend on the lens. We condition both on the dense ray field, the unit direction through every pixel, which describes any central camera without a lens type, distortion coefficients or a bound on field of view. Angular coordinates give the rotary encoding the measured ray angle of each patch, evaluated per view, and solid-angle weighting scales the point loss by the area each pixel covers on the sphere, so neither the encoding nor the supervision depends on the lens. Any3R is therefore a feed-forward model that takes any central camera, and is robust to mixing many camera types per scene, with no retraining per lens. On a benchmark of thirteen central cameras across three datasets, where every method reconstructs with its own predicted camera poses, it is the most consistently accurate method. Any3R enables scalable 3D reconstruction from heterogeneous crowdsourced and archival imagery collections sourced across diverse camera types. Project page: https://jingong-chen.github.io/Any3R/

0.46

Body of Evidence: Triangulating 3D Human Pose with Geometry-Conditioned Depth

cs.CV ·2026-11-16 ·Erik Brorsson, Kilian Freitag, Josef Bengtson, Kristofer Bengtsson, Lars Hammarstrand +2 more
similarity 0.67
Abstract

Even in multi-camera setups, occlusions can leave individual body joints with only a single usable 2D observation. Such an observation defines a viewing ray but leaves the joint's depth undetermined. We introduce Body of Evidence (BoE), a multi-view 3D human pose estimator that predicts per-camera joint depths alongside 2D joint locations. To reduce monocular depth ambiguity, we propose geometry-conditioned depth prediction, which combines image features with previously reconstructed 3D body geometry as contextual depth cues. We further introduce learnable depth-aware triangulation (LDAT), which augments differentiable algebraic triangulation with predicted depth constraints, enabling reconstruction even from a single contributing camera while preserving the benefits of geometric triangulation when multiple views are available. The reconstructed 3D poses subsequently guide depth prediction in the next iteration, allowing depth estimates and 3D geometry to progressively refine each other. Experiments on CMU Panoptic demonstrate state-of-the-art in-domain performance and superior average performance across evaluated camera subsets and unseen camera arrangements. BoE is particularly effective under sparse camera coverage, outperforming the previous state of the art by 10.6 AP25 points in the challenging three-camera setting.

0.14

CrossDepth: Geometry-Constrained Attention for Generalizable Multi-View Surround Depth Estimation

cs.CV cs.RO ·2026-09-04 ·Samer Abualhanud, Max Mehltretter
code/data similarity 0.65
Abstract

Reliable 3D understanding of the surrounding environment is a core requirement for autonomous driving. Multi-view surround camera rigs provide broad scene coverage, but the spatially adjacent images typically overlap only minimally. Consequently, the depth of most pixels must be inferred from monocular appearance cues. These cues can appear differently across images and may therefore be interpreted differently by the depth estimation model. We target two main sources of cross-image inconsistency: differences in camera intrinsics and the limited receptive field of each image. We address the former by conditioning the features on per-pixel camera-aware ray embeddings, enabling the network to account for camera-dependent variations in monocular cues. We address the latter by extending each pixel's context beyond its own image through cross-image attention constrained to geometrically plausible regions, derived from the calibrated rig setup. The model is trained in a fully self-supervised manner based on photometric consistency. Evaluations on DDAD and nuScenes show improved overall depth accuracy and cross-image depth consistency over state-of-the-art self-supervised methods under in-domain and cross-domain evaluation. Code is available at https://abualhanud.github.io/CrossDepthPage/.

0.31

EgoRayFormer: Ray-Space Stereo Refinement for Egocentric 3D Human Pose Estimation

cs.RO ·2026-10-19 ·Haozhe Wang, Songyuan Wu, Jihai Xu, Jie Zhao
similarity 0.65
Abstract

Head-mounted stereo fisheye cameras provide a compact view of the wearer's body, but strong distortion, partial visibility and a short baseline make 3D pose estimation difficult. Existing refinement decoders sample image features independently in each view, without requiring the samples to correspond to a common 3D hypothesis. We introduce EgoRayFormer, a causal pose estimator that couples stereo feature sampling and geometric refinement in ray space. For each joint, the decoder projects shared 3D hypotheses along and around its viewing ray into both images. A geometric branch then corrects the projected joint locations and intersects the resulting rays; a learned gate blends this geometric estimate with a learned pose update. This formulation introduces an explicit stereo constraint while retaining flexibility when the rays provide weak depth constraints. In local evaluations on the official device-relative test splits, EgoRayFormer achieves three-seed mean MPJPEs of 17.64 mm on UnrealEgo2 and 49.55 mm on UnrealEgo-RW, improving to 47.57 mm with UnrealEgo2 pre-training. In paired validation ablations, removing the geometric branch increases MPJPE in all three seeds at both input resolutions. With a common ResNet-18 encoder and input resolution, our system reduces RW test MPJPE by 9.09 mm relative to the device-relative EgoPoseFormer baseline. A separate protocol analysis quantifies the difference between device-relative and oracle-root evaluation.

0.12

Learning Which Correspondences to Trust: Confidence-Weighted Event-Camera Localization in LiDAR Maps

cs.CV cs.RO ·2026-10-08 ·Panagiotis Kiousis, Kuangyi Chen, Jun Zhang, Friedrich Fraundorfer
code/data similarity 0.65
Abstract · 8 pages, 8 figures/tables. Submitted to IEEE ICRA 2027 (under review). Code: https://github.com/panagiotisq/CELL

Localizing an event camera against a pre-built LiDAR map can be cast as dense optical-flow estimation between a rendered depth view and an event image, followed by a Perspective-n-Point (PnP) solver over the induced 3D-2D correspondences. Existing pipelines rely on geometric consensus during pose estimation, but do not explicitly model the reliability or pose informativeness, i.e., how strongly a correspondence constrains the camera pose, of individual correspondences. We show that the natural way to learn it -- using the per-correspondence error to constrain the learning of confidence -- suffers from a depth-dependent bias: small pixel errors reside predominantly at large depths and do not lead to high pose informativeness. Instead, in our method (CELL), we learn a per-correspondence confidence end-to-end through the pose, using a differentiable probabilistic PnP whose log-partition term encourages weight configurations that yield a better-constrained pose distribution. The learned confidence is used in three ways: (i) it reweights the flow supervision in a decoupled training scheme that keeps pose gradients out of the flow/edge backbone; (ii) it drives a probabilistic correspondence selection at test time; and (iii) together with the network's edge-probability it weights a final edge-matching refinement. We further design a partial-completion depth representation that adds signal without hallucinating across large gaps. On M3ED and DSEC our full system improves over the LEAR baseline on the majority of the evaluated sequences: it reduces the median translation error by up to 26.9% and the median rotation error by up to 15.8%.

0.28

G-ray: Ray-Level Relative Geometric Position Encoding in Multi-View Vision Transformers under Camera Heterogeneity

cs.CV ·2026-09-14 ·Shuo Zhang, Xin Su, Wei Wang, Jun Liu, Xinrui Zeng +6 more
code/data similarity 0.65
Abstract · 26 pages, 13 figures, 14 tables. Supplementary material included in the appendix. Project page: https://g-ray-project.github.io/

We study relative position encoding for multi-view vision Transformers under camera heterogeneity, including varying fields of view (FoVs) or projection models. Existing rotary relative position encodings commonly use image-plane positional coordinates, producing projection-dependent relative phases and inconsistent geometric cues for cross-projection attention. We introduce G-ray, a ray-level relative position encoding whose rotary phases are parameterized by camera-local ray angles. The same camera-local ray pair induces the same relative phase across projections, providing projection-invariant positional consistency. G-ray can be used directly or integrated with existing encodings, retaining complementary geometric cues without additional learned parameters. We validate G-ray in three host encodings, RoPE, GTA, and RayRoPE, across 3D reconstruction and novel-view synthesis (NVS). Across three heterogeneous 3D reconstruction benchmarks at 50 views, G-ray leads all six averaged metrics and reduces mean pointmap relative error by 45.8% over MapAnything, with calibration supplied to both. Trained exclusively on homogeneous pinhole images, the 3D reconstruction model handles mixed pinhole and non-pinhole inputs without retraining and remains competitive on homogeneous pinhole 3D reconstruction protocols. For NVS, GTA and RayRoPE improve with G-ray under joint viewpoint and FoV variation. The project's webpage is available at https://g-ray-project.github.io/.

0.59