CS Paper Radar

Radar-Native Control Barrier Functions: Doppler Range Rate as a Measured Barrier Derivative

Johannes Mootz, Hesam Mojtahedi, Reza Akhavian

cs.RO eess.SY ·submitted 2026-11-18 00:19 UTC · v1

Abstract

Safe control around dynamic obstacles requires information about both distance and relative motion. Range-based filters commonly reconstruct the required range rate from successive range measurements or from obstacle-state estimators, which can introduce estimator delay or sensitivity to range noise when obstacle motion changes. A frequency-modulated continuous-wave (FMCW) radar measures radial relative velocity directly through Doppler. We use this measurement as the derivative of an ego-centered range control barrier function (CBF) and obtain a closed-form filter on the robot's forward velocity. A measurement margin constructed from sensor error bounds accounts for errors in range, Doppler, ego velocity, and bearing. In 508 paired encounters within the platform's retreat capability, direct Doppler produces two buffer incursions, compared with 15 for a constant-acceleration and 25 for a constant-velocity Kalman filter. On a Unitree Go1, the controller stops at $0.777 \pm 0.015$ m against the predicted $0.758$ m and reacts to a farther approaching object while a nearer static return remains. The guarantee covers the longitudinal range channel under bounded measurement errors and continuously available detections. Direct Doppler removes the need to reconstruct range rate in the safety loop, reducing the delay between a change in obstacle motion and its effect on the safety command.

Closest papers

Nearest neighbours by meaning across the whole index.

Doppler-aided Position-Velocity Tracking of Hidden Objects using mmWave Radar

cs.RO cs.CV ·2026-10-25 ·Yerin Cheon, Kush Garg, Akshat Dave
benchmark similarity 0.62
Abstract · 8 pages, 8 figures

Safe indoor operation requires autonomous tracking of objects that are not directly visible to the robot. Optical non-line-of-sight (NLoS) methods depend on ambient lighting and scene geometry or on weak multi-bounce returns that need long acquisitions. Millimeter-wave (mmWave) radar offers an attractive alternative: walls act as reflectors for mmWave signals, and frequency-modulated continuous-wave (FMCW) radars enable fast, practical measurement of range, angle, and velocity. However, the low resolution of these radars leads to spatially ambiguous observations. The Doppler information, although particularly sensitive to target motion, remains underexplored in indoor NLoS localization: existing methods emphasize spatial representations and either collapse or discard the Doppler dimension before learning. To leverage the complete Range-Azimuth-Doppler (RAD) information, we acquire the first indoor NLoS radar dataset that pairs sequential RAD measurements with synchronized position and velocity ground truth under controlled variations in motion: 576 sequences totaling 720,856 frames across 12 trajectories of a mobile robot moving along varying speeds, starting positions, and material configurations. We then formulate NLoS tracking as sequential position-velocity estimation rather than frame-wise localization: a shared 3-D encoder processes the full RAD representation of consecutive frames, separate recurrent branches estimate position and velocity, and post-inference refinement combines the two into a motion-consistent trajectory. Our method achieves 8.95cm position and 1.75cm/s velocity errors on held-out trajectories and generalizes to unseen scenarios involving a moving human target. Together, our dataset and tracker establish a benchmark for tracking hidden moving targets with a low-cost radar.

0.19

BIG-CBF: Behavior-Imagination-Guided Control Barrier Function with Shared Uncertainty for Mobile Robot Navigation

cs.RO ·2026-09-13 ·Shibo Li, Zhongcheng Wang, Jiahe Cao, Jianhua Yang, Ke Wu
benchmark similarity 0.58
Abstract

Control barrier functions (CBFs) provide a mathematically grounded framework for enforcing local collision-avoidance constraints in autonomous mobile robots, commonly through optimization-based safety filters. However, a minimum-intervention CBF filter lacks task-level maneuver awareness and may fail to select a productive avoidance direction when multiple distinct maneuvers are locally viable, leading to safe but stalled behavior in geometrically ambiguous environments. This paper presents BIG-CBF, Behavior-Imagination-Guided Control Barrier Function with shared uncertainty, a two-rate navigation architecture that separates low-rate maneuver selection from high-rate safety filtering. Over a short horizon, six closed-loop feedback behaviors are imagined and evaluated using analytic CBF compatibility together with a lightweight objective accounting for task progress, freezing, smoothness, and switching. To reduce planning-execution mismatch, the imagination and execution layers share consistent uncertainty sources for relative-motion delay, obstacle prediction, zero-order-hold motion, and command-execution residuals, while a hard CBF remains the final safety authority. In a 3,600-episode comparative benchmark across nine scenarios, BIG-CBF achieves the highest overall task success rate of 99.78% while substantially reducing downstream CBF intervention. On a physical omnidirectional robot with onboard Jetson Orin Nano computation, BIG-CBF completes all 15 evaluation runs without a recorded contact event. Matched hardware comparisons against the non-shared variant further show lower CBF intervention energy and activation frequency, supporting improved consistency between maneuver selection and safety-critical execution.

0.25

OcclusionCBF: Backup Control Barrier Functions for Safe Navigation Among Hidden Dynamic Obstacles

cs.RO eess.SY ·2026-09-06 ·Taekyung Kim, Hun Kuk Park, Renya Wada, Nikolay Atanasov, Shumon Koga +1 more
code/data similarity 0.58
Abstract · The first two authors contributed equally to this work. Project page: https://www.taekyung.me/occlusion-cbf

Robots navigating under occlusion may enter states from which no admissible input can avoid a dynamic obstacle once it becomes visible. We present OcclusionCBF, a safety filter that extends backup control barrier functions to reachable-occupancy predictions for potentially hidden dynamic obstacles in occluded regions. The method certifies a prescribed backup rollout against collision-inflated occupancy and a verified terminal set, yielding affine constraints for minimally invasive quadratic-program filtering. We establish recursive feasibility of the resulting safety filter, and collision avoidance for every hidden-obstacle motion covered by the occupancy prediction. Randomized benchmarks, MetaUrban simulations, and hardware experiments demonstrate improved task success over reactive and occlusion-aware predictive baselines with millisecond-scale computation.

0.40

LACART: Lookahead-Augmented Collision Avoidance and Reference Tracking Strategies for Safety-Critical Robots

cs.RO eess.SY ·2026-11-06 ·Pedro Lopes, Amit Shivam, Luis Tiago Paiva
similarity 0.58
Abstract

Autonomous racing provides a demanding testbed for collision avoidance under tight geometric and computational constraints. Building on a recent conference contribution and a master's dissertation, LACART combines lookahead-based control barrier functions (CBFs), a relaxed control Lyapunov function (CLF), and quadratic programming (QP) to modify nominal vehicle commands for obstacle avoidance and reference tracking. The method handles circular obstacles and track boundaries in a common optimisation layer. Comparative simulation results against Huang \emph{et al.} \cite{r9} show similar full-track paths and lower median computation times: 0.31 versus 0.33 ms per step and 0.023 versus 0.025 ms per QP solve. The dissertation further demonstrates a 1:43-scale vehicle with camera-based estimation and wireless actuation at a reported 25 Hz control rate. We identify the conditions linking lookahead-point clearance to body clearance, illustrate hardware limitations, and propose a recorded demonstration of safety intervention and recovery. The contribution targets ground-robot collision avoidance and real-time safety monitoring.

0.27

Observability Analysis for Fusion of Doppler Measurements in Multistatic Radar Near the Tx-Rx Baseline

eess.SY eess.SP ·2026-08-28 ·Rong Yang, Yaakov Bar-Shalom, Leung Hong Huat Michael
published similarity 0.57
Abstract · 7 pages, 12 figures. published on 29th International Conference on Information Fusion, Trondheim, Norway, June 2026

This paper studies multistatic measurement fusion when a target lies within the Tx--Rx (Transmitter-Receiver) baseline ambiguity zone, with particular emphasis on configurations involving two closely spaced stationary Tx--Rx pairs. Such configurations provide overlapping detectable regions and extend the effective detection range compared with sparsely spaced multistatic systems. However, in this region, the accuracy of range and bearing measurements degrades rapidly, and Doppler measurements often remain the only reliable information source. As a result, target trajectory estimation becomes highly challenging, with observability being marginal or even completely lost. To address this problem, the observability of target trajectories is analyzed under various conditions, enabling system designers to assess system performance in advance. A Doppler-only measurement fusion approach is then developed, employing a multiple-initial-point Maximum Likelihood (ML) nonlinear estimator for initial state estimation, followed by dynamic state updates using an Extended Kalman Filter (EKF). Simulation results are presented and shown to be consistent with the observability analysis.

0.22

What Limits mmWave Human-State Sensing for Robot Perception?

cs.RO cs.HC ·2026-11-06 ·Shuntian Zheng, Guangming Wang, Hongyang He, Shuai He, Yu Guan
similarity 0.56
Abstract

Assistive robots and search-and-rescue platforms require reliable human state sensing in smoke, darkness, and privacy-sensitive environments, where cameras and LiDAR may be unreliable Millimeter-wave radar offers an alternative that works without ambient light, penetrates smoke, and does not capture visual appearance. However, the compact arrays that fit robot size, power, and cost budgets have limited apertures, producing joint-localization errors on the order of decimeters at a few meters, large enough to compromise the safety margins and tracking accuracy a robot depends on. Existing pipelines reduce pose error through frame fusion, multiple viewpoints, return selection, or stronger estimators, but examine one technique at a time, without relating its effect to a shared measurement limit or separating gains from added information from gains from estimator completion. We address this gap with a framework that models the human and environment as one time-varying scattering field and states a Cramer-Rao type error floor for joint localization as a function of bandwidth, aperture, signal-to-noise ratio, fused frame count, phase coherence, and visibility of retained returns. We then use existing frame fusion, multi viewpoint, return selection, and pose estimation methods as matched probes of this floor rather than as competing pipelines. Under the evaluated conditions, experiments on three datasets and a live deployment show these strategies move joint localization error in the predicted directions, for example lowering mean per-joint position error from about 97 to 65 mm with a second viewpoint, while a stronger estimator mainly lowers overall error by completing joints the measurement cannot resolve. These results give the robotics community a principled basis for deciding whether to prioritize observation design or estimator capacity when deploying reliable mmWave human sensing.

0.28

SC3BF: Shifted Collision Cone Control Barrier Function for Dynamic Obstacle Avoidance

cs.RO cs.MAeess.SY ·2026-10-06 ·Amin Kashiri, Yasin Yazıcıoğlu
theory similarity 0.56
Abstract · Submitted to the 2027 American Control Conference (ACC)

The collision cone used by velocity-space control barrier functions is conservative: it rejects every relative velocity aimed into an obstacle, however slow. We propose the \emph{shifted collision-cone CBF} (SC3BF), which adds a state-dependent \emph{allowance} to the cone condition, so the robot may approach the obstacle at a rate that grows with distance and with its own speed. SC3BF is enforced by an ordinary quadratic program, and its safe set is forward invariant under bounded inputs without a minimum forward speed or a clearance margin. We prove that a nonzero allowance preserving safety always exists, and derive one in closed form. Against three velocity-space baselines on a kinematic bicycle among up to $100$ moving obstacles, SC3BF reaches the goal more often and modifies the nominal input less than half as much.

0.40

Non-Myopic Safety Filtering with Learned Intervention Cost-to-Go

eess.SY cs.LG ·2026-11-16 ·Johannes Autenrieb, Mark Spiller, Daniel Silvestre, Namhoon Cho, Jason J. Choi
similarity 0.56
Abstract · 19 pages, 5 figures

Control barrier function (CBF) safety filters minimize instantaneous deviation from a nominal control command, but a sequence of pointwise-minimal interventions need not minimize cumulative intervention effort. This paper proposes a discrete-time non-myopic safety filter using a learned approximation of the optimal intervention cost-to-go over CBF-admissible policies. The approximation enters through a relaxed Bellman-residual constraint, while the original barrier condition remains hard. Feasibility is equivalent to that of the conventional CBF filter, and forward invariance remains independent of approximation accuracy under the stated assumptions. We derive a trajectory-wise performance certificate that requires neither the optimal value function nor an approximation-error bound. Under additional approximation and horizon assumptions, a suboptimality bound contains an explicit endpoint approximation-error term together with accumulated tolerance and relaxation terms. Numerical results for a collision-avoidance problem show an approximately 50% reduction in mean cumulative intervention effort relative to conventional CBF filtering over 100 initial conditions not used during training or parameter selection. The improvement is consistent across three independently trained networks, while maintaining the prescribed safety constraints and requiring less online computation than the tested predictive filter.

0.22