CS Paper Radar

VR-SparseQuant: Accurate FP4 Quantization with 2:4 Sparsity on Vera Rubin

Samir Khaki, Wei-Chen Wang, Song Han, Ryan Hanrui Wang

cs.CL ·submitted 2026-11-19 08:29 UTC · v1

Abstract

In recent years, GPUs have incorporated increasingly specialized support for low-precision computation, from Hopper's FP8 to Blackwell's FP4 Tensor Cores. Precision formats have evolved alongside this hardware, from MXFP4 and NVFP4 on Blackwell to E2M1 FP4 with direct UE5M3 block scaling on Vera Rubin, which we term as $\boldsymbol{VRFP4}$. These advances help serve larger language models at lower cost, but four-bit activation quantization can substantially degrade model quality. We introduce VR-SparseQuant, which uses Vera Rubin's elementwise 2:4 sparsity to recover accuracy while retaining native FP4 execution. By allowing two sparse streams to overlap, we use the same FP4 value budget as dense quantization to refine activations with larger errors. Offline scale-ratio calibration avoids runtime search, while a shared-weight GEMM accumulates both streams efficiently. On Nemotron-3-Nano-30B-A3B, VR-SparseQuant reduces WikiText-2 perplexity from $\boldsymbol{6.85}$ to $\boldsymbol{5.57}$ versus dense RTN W4A4. Including activation preparation, our native Rubin kernels for VRFP4 achieve up to $\boldsymbol{3.1\times}$ GEMM and $\boldsymbol{2.7\times}$ MoE speedup over BF16. To the best of our knowledge, this is the first study of adaptive activation quantization using Vera Rubin's elementwise 2:4 structured sparse FP4 instructions.

Comment
16 Pages, 7 Figures

Closest papers

Nearest neighbours by meaning across the whole index.

FP4Quant: Efficient 4-Bit Communication Compression for Model-Parallel LLM Training

cs.AI ·2026-11-03 ·Man Liu, Xingchen Liu, Hairui Zhao, Guangming Tan, Dingwen Tao
published similarity 0.75
Abstract · 5 figures, 3 tables, accepted by IFIP NPC 2026

The rapid scaling of large language models (LLMs) has made communication overhead a critical bottleneck in distributed model-parallel training. Although existing low-precision compression methods can effectively reduce communication costs, further reducing the communication footprint to ultra-low-bit formats such as FP4 introduces new challenges, including limited numerical range, sub-byte storage overhead, and increased computational cost from fine-grained quantization. In this paper, we present \textbf{FP4Quant}, a micro-grouped FP4 compression framework for efficient model-parallel LLM training. FP4Quant integrates a micro-grouped dual-scale FP4 quantization mechanism to preserve local tensor distribution characteristics, a warp-cooperative FP4 packing scheme to enable efficient sub-byte data representation, and a hybrid two-level FWHT pipeline to mitigate quantization errors with GPU-aware execution optimization. Experiments on NVIDIA H100 GPUs with Qwen-7B demonstrate up to 1.56$\times$ end-to-end throughput improvement over BF16, revealing a trade-off between throughput and model quality.

0.28

BitDecoding-FP4: Native FP4 KV Cache Decoding via Algorithm-System Co-Design

cs.AI cs.ARcs.CLcs.PF ·2026-11-06 ·Dayou Du, Woon Yee Ng, Guangming Sheng, Nick Lau, Jianyi Cheng +1 more
code/data similarity 0.74
Abstract

The key-value (KV) cache dominates memory capacity and bandwidth in long-context LLM serving. While 4-bit microscaling formats (NVFP4, MXFP4) shrink the cache and run attention on FP4 Tensor Cores, a fundamental gap remains between algorithmic quantization and system-aware acceleration: existing FP4 KV systems use vanilla quantization that causes severe accuracy drops, whereas accuracy-oriented 4-bit algorithms rely on vector codebooks whose lookup overhead degrades decoding throughput. We present BitDecoding-FP4, an algorithm--system co-design for accurate and efficient native FP4 KV decoding. We mitigate three error sources: Dual-Residual Query Quantization splits queries into two FP4 tensors, cutting query logit error from 60% to 1%; Underflow-Aware Probability Scaling prevents E4M3 scales from rounding long-context probabilities to zero; and Outlier-Aware Key Quantization combines static smoothing, Hadamard rotation, and scale search to suppress key outliers under token-wise scaling. At the system level, we remove the softmax bottleneck via transposed softmax with fused probability quantization and stacked query MMA on paged KV caches. Across dense and MoE models with GQA and MLA, BitDecoding-FP4 stays within 0.5 points of BF16 KV accuracy with NVFP4 (1 point with MXFP4), and tracks BF16 KV in RL training rollouts. In end-to-end serving on NVIDIA B300 with Qwen3-4B and Qwen3-30B-A3B, it delivers 2.4-3.0$\times$ higher peak serving throughput than BF16 KV. The implementation is available at https://github.com/OpenBitSys/BitDecoding-FP4.

0.43

OSFP4: Joint Optimization of Diagonal Smoothing and Block Scales for NVFP4 Quantization

cs.AI cs.IT ·2026-10-06 ·Neriah Ben David, Ori Meir, Or Ordentlich
code/data similarity 0.74
Abstract

NVFP4 is an attractive datatype for large language model (LLM) inference, offering compact storage and native tensor-core acceleration. However, preserving accuracy using NVFP4 requires careful quantization. In this work we develop a novel quantization scheme called Optimized Smoothing and Scaling for NVFP4 (OSFP4). For each linear projection it uses a diagonal smoothing matrix whose entries are optimized to minimize the squared matrix-product quantization error under NVFP4, taking into account the rounding procedure that is used (either round-to-nearest, or GPTQ-style successive interference cancellation). This requires performing joint optimization on the smoothing entries as well as the block scales, which is facilitated by analyzing a multiplicative-dither FP4 quantizer instead of the fixed deterministic one. Experiments show that OSFP4 achieves the highest average accuracy among the evaluated competitors in the corresponding quantization settings, while retaining approximately 94-97\% of vendor NVFP4 prefill throughput on the measured workloads. Our code is available in https://github.com/neriahbd/OSFP4

0.42

Jet-QSparse: Accelerating Agentic LLM Inference with 4-Bit Sparse Attention

cs.LG ·2026-10-31 ·Haozhan Tang, Hao Kang, Meng Lu, Yecheng Wu, Zerui Wang +5 more
similarity 0.73
Abstract

Long-horizon reasoning and agentic workloads strain KV-cache capacity and decode attention throughput. We present Jet-QSparse, a training-free method that combines compact NVFP4 cache storage with native FP4 query-key computation on Blackwell tensor cores. A dense scan scores the full key history and selects 128-token blocks for sparse FP16 value aggregation with FP32 accumulation, preserving higher precision in the output-forming step while enabling contiguous tile loads. Calibrated key centering and at most two BF16 pages per sequence and layer address quantization error; FP8 prefill uses a temporary arena while the persistent cache is packed directly from BF16 activations. Across four hybrid LLMs, a budget of 128 blocks per KV head shows no detected accuracy loss on the evaluated mathematical reasoning, coding, and agentic benchmarks, although some smaller budgets incur losses. With 64 blocks, Qwen3.8-27B achieves a $1.94\times$ end-to-end decode speedup over dense BF16 at 128K context and batch size 16 on one GB300, and the measured Qwen KV pools provide $2.58$-$2.76\times$ BF16's token capacity.

0.22

BiLoCo: Binary Low-Rank Corrections for Post-Training Quantization

cs.LG ·2026-10-23 ·David Jin, Beshr IslamBouli, Tarushii Goel, Han Guo, Yoon Kim
similarity 0.73
Abstract

Post-training quantization (PTQ) to FP4 has emerged as a key technique for reducing large language model inference cost, especially on Blackwell GPUs, which offer native FP4 tensor core support. Direct PTQ to FP4, however, still leaves a noticeable accuracy gap. Recent work on SVDQuant mitigates the errors introduced through FP4 quantization for diffusion models by adding high-precision low-rank corrections obtained via SVD. However, this high-precision low-rank correction requires many bits per rank, and it runs on the same tensor cores as the main FP4 GEMM. We introduce BiLoCo, a low-rank correction method whose left and right factors are stored as binary ${\{\pm 1\}}$ sign vectors rather than as BF16 numbers. The signed format uses $16{\times}$ less storage per rank-one component, and since the correction now consists of additions/subtractions, this can be run on CUDA cores concurrently with the FP4 tensor-core GEMM. On 4B--72B LLMs, BiLoCo matches or improves memory-matched SVDQuant for PTQ. We implement BiLoCo on B300 as a fused single kernel, where the FP4 GEMM runs on tensor cores, the bit-packed correction on the CUDA cores of the same launch, and the two are combined in the GEMM epilogue. With batch size $1$, the fused kernel is at most $11\%$ slower than the FP4-only GEMM for every rank up to $512$. At rank $128$, it is at most $20\%$ slower up to batch size $8$.

0.32

SoScale: Second-Order Scale Search for FP4 Quantization

cs.LG cs.AI ·2026-11-12 ·Pengxiang Zhao, Xing Li, Hui-Ling Zhen, Weizhe Lin, Xianzhi Yu +1 more
similarity 0.72
Abstract

Low-bit quantization reduces the memory footprint and inference cost of large language models (LLMs), yet accurate FP4 quantization remains challenging. Practical formats such as MXFP4, NVFP4, and HiF4 pair a 4-bit floating-point payload with block-wise or hierarchical scale codes, making accuracy highly sensitive to how each local distribution is scaled. Default maximum-absolute-value scaling preserves dynamic range, but can spend scarce FP4 levels on rarely occupied outlier regions and leave dense tensor values poorly resolved. Existing scale-search methods minimize local element-wise reconstruction error, optimizing tensor fidelity rather than layer-output fidelity. We propose SoScale, a second-order weight scale-code search method for hierarchical FP4 quantization. SoScale searches hardware-valid scale codes under a Hessian-aware layer reconstruction objective and couples this search with GPTQ-style error recovery, selecting scales by their impact on layer outputs. Across Qwen3 models, SoScale consistently reduces downstream quantization degradation under MXFP4, NVFP4, and HiF4.

0.04

ResServe: Accurate and Efficient FP4 LLM Inference with Residue Compensation

cs.DC ·2026-11-05 ·Shuo Rong, Ruibo Fan, Jiawen Wen, Xiaowen Chu
code/data similarity 0.71
Abstract · 26 pages, 20 figures, 9 tables, including appendices. Code: https://github.com/ShawRong/resserve

Block-scaled 4-bit floating-point (FP4) quantization reduces large language model inference costs but can degrade task quality. Higher-precision computation can mitigate this loss at the expense of some of the efficiency gains from FP4 inference. Narrow matrix computations common in decoding often leave spare hardware capacity for low-cost precision recovery. ResServe combines an FP4 activation base with an FP4-quantized residue representing information lost during quantization. It uses this spare capacity to compute the residue's contribution and combines results on-chip, avoiding extra result transfers. We apply this principle to linear layers and decode attention, while selective compensation limits added work when processing input prompts. On NVIDIA B200, compensated linear kernels using the NVFP4 format improve numerical precision while retaining latency close to uncompensated execution for the evaluated operations with few rows. In the evaluated NVFP4 inference configurations, ResServe adds at most 3.4% request-latency overhead over W4A4 and reduces request latency by 22.4-53.3% relative to W4A8. Across five models, code-generation accuracy improves over same-format uncompensated inference, with mean relative gains of 15.04% for NVFP4 and 53.57% for MXFP4.

0.39

MpFA: Hardware-Efficient Train-Free QK4V8 FlashAttention Kernels on Blackwell GPUs

cs.DC ·2026-09-27 ·Chencheng Deng, Jianbin Fang, Dezun Dong
benchmark similarity 0.71
Abstract

Long-context LLM inference pushes modern GPU serving stacks into an attention-bound regime, where both compute and memory are dominated by the softmax-GEMM pipeline. On NVIDIA Blackwell GPUs, FP4 Tensor Cores offer high matmul throughput, but we find that fully FP4 attention often fails to translate this throughput into end-to-end speedups due to non-matmul costs: online quantization after softmax, tensor/shared-memory data movement, and contention on the softmax path. We present MpFA, a training-free FlashAttention kernel optimized for Blackwell. Guided by hardware characterization, MpFA uses mixed precision: NVFP4 for QK and FP8 for PV (QK4PV8). This preserves low-bit QK throughput while avoiding the conversion and scaling overheads of FP4 PV. To recover accuracy without further stressing the softmax pipeline, MpFA introduces rank-one smoothing compensation implemented as an additional Tensor Core MMA. MpFA further improves performance with a fine-grained asynchronous pipeline, tensor-memory reuse, and adaptive parallel partitioning across prefill and decode. On an NVIDIA SM100 GPU and across 16K-128K contexts, MpFA improves prefill throughput over state-of-the-art BF16/FP8 baselines and increases end-to-end output throughput by 2.81$\times$ over BF16 FA4 across Llama-3.1-8B and Qwen3-14B. Across five benchmark suites and two models, rank-one compensation recovers 62.5% of the accuracy loss with about 2.0% kernel overhead.

0.43