CS Paper Radar

On the Hamel Coefficients and the Boltzmann-Hamel Equations for the Rigid Body

Andreas Müller

cs.RO ·submitted 2026-11-19 08:41 UTC · v1
publishedunusual

Abstract

The Boltzmann-Hamel (BH) equations are central in the dynamics and control of nonholonomic systems described in terms of quasi-velocities. The rigid body is a classical example of such systems, and it is well-known that the BH-equations are the Newton-Euler (NE) equations when described in terms of rigid body twists as quasi-velocities. It is further known that the NE-equations are the Euler-Poincare, respectively, the reduced Euler-Lagrange equations on SE(3) when using body-fixed or spatial representation of rigid body twists. The connection between these equations are the Hamel coefficients, which are immediately identified as the structure constants of SE(3). However, an explicit coordinate-free derivation has not been presented in the literature. In this paper the Hamel coefficients for the rigid body are derived in a coordinate-free way without resorting to local coordinates describing the rigid body motion. The three most relevant choices of quasi-velocities (body-fixed, spatial, and hybrid representation of rigid body twists) are considered. The corresponding BH-equations are derived explicitly for the rotating and free floating body. Further, the Hamel equations for nonholonomically constrained rigid bodies are discussed, and demonstrated for the inhomogenous ball rolling on a plane.

Journal ref
J Nonlinear Sci 31, 40 (2021)
DOI
10.1007/s00332-021-09692-7

Closest papers

Nearest neighbours by meaning across the whole index.

Dual Park-Ravani Interpolation of Rigid Motions: Acceleration-Field Continuity and Holonomic Hermite Repair

cs.RO ·2026-08-28 ·Daniel Condurache
similarity 0.52
Abstract · 12 pages. Ancillary Python programs reproduce the numerical verification

The Park-Ravani construction generates a twice continuously differentiable, frame-invariant spline on SO(3) by exponentiating cubic canonical-coordinate polynomials. We show that the construction transfers, without changing form, to the group of orthogonal dual tensors, a representation of rigid displacements. The transferred recurrence is stated compactly through the dual extension of the right Jacobian of the exponential map and its first Fréchet derivative. This yields interpolation of prescribed rigid poses and continuity of the body dual twist and its first derivative. Using the higher-order rigid-body kinematics of dual spatial twists, we then prove that the resulting curve has a continuous physical acceleration field, not merely a continuous quantity obtained by formally differentiating the dual part of a twist. We also distinguish algebraic dual transfer from temporal differential prolongation: their simultaneous first-order use takes place in a hyper-dual algebra, and interpolation of arbitrary prolonged nodal data need not be holonomic. A noncommuting three-pose example verifies the recurrence, all knot continuity statements, and dimensional covariance under a change from meters to millimeters. We define and analyze the first-order holonomy defect of a generic hyper-dual interpolant, exhibit an exact counterexample, and remove the defect by cubic or quintic Hermite interpolation in dual logarithmic coordinates.

0.25

Orientation in Extended Position-Based Dynamics: Application to Rigid Bodies and Cosserat Rods

cs.GR ·2026-08-21 ·Samuel Tobin, Caleb Rucker
similarity 0.50
Abstract

Rotational degrees of freedom in Extended Position-Based Dynamics (XPBD) require computations on the nonlinear manifold of 3D rotations. We show that Lie theory provides a clean, unified framework for expressing rotations, constraints, interpolation, and differentiation in XPBD, enabling both improved rigid-body constraints and higher-order finite-element Cosserat rods. We derive explicit Lie-theoretic constraint formulations and their gradients for rigid-body simulation, improving the dynamic consistency of constrained rigid-body simulations in XPBD by a factor of over $10^4$ compared to the state-of-the-art. Our framework naturally extends to finite-element Cosserat rods by enabling on-manifold interpolation of nodal rotations. Linear finite elements outperform the conventional chain-of-rigid-bodies discretization, while higher-order basis functions provide even smoother solutions and faster convergence. Utility is demonstrated in a variety of examples with large deformations and contact.

0.34

Lie Group Structure of Six-Degree-of-Freedom Rigid-Body Uncertainty Representation and Propagation

eess.SY ·2026-11-13 ·Zhuochen Wang, Panagiotis Tsiotras
similarity 0.48
Abstract

For six-degree-of-freedom rigid-body motion, the choice of Lie-group structure affects both how well the group-theoretic mean and covariance represent the state distribution and how accurately these moments are propagated. A quaternion-based, left-trivialized semidirect-product formulation of the velocity phase space is developed for the actuated body-frame dynamics, with closed-form group operations and Jacobians that avoid matrix-group embeddings. We derive the controlled stochastic dynamics and establish that the direct- and semidirect-product formulations describe the same physical process under the specified noise model. Since the semidirect exponential coordinates account for frame changes between body twists at different poses, they capture pose--twist coupling more naturally. A lunar powered-descent experiment assesses low-order moment representations of uncertainty and propagation performance under the proposed group structure using two distinct algorithms. Compared with direct-product formulations and a linearized baseline, the proposed structure improves the representation of the banana-shaped body-velocity distribution using group-theoretic moments, yields more consistent propagated moments, and produces distribution approximations that agree more closely with the Monte Carlo reference. In this experiment, changing the group structure accounts for most of the observed improvement, highlighting the practical value of the proposed semidirect-product formulation.

0.27

Compositional Aeroelastic Operators for Morphing Flexible Multibody Aircraft: A Geometric Framework with Structural Verification

cs.CE math.NAphysics.flu-dyn ·2026-08-15 ·Gelin Chen, Chen Song, Chao Yang
similarity 0.48
Abstract · 30 pages, 2 figures, 2 tables

Morphing flexible multibody aircraft require structural strain, aerodynamic geometry, surface velocity, and generalized loading to remain compatible as joints and flexible components change configuration. A compositional formulation is developed around an assumed material attachment between each lifting surface and a geometrically exact beam. Separating the component root pose from the section field shows that the body strain and elastic potential of a component depend on its own elastic coordinates, while upstream motion enters kinetic terms and external-load pullbacks. At element level, an exact relative logarithm $d$ supplies strain and potential energy, whereas a reference-anchored section coordinate $σ$ supplies deformed section geometry. Finite-order expansions retain the finite reference geometry exactly and truncate only endpoint perturbations. The attachment map then generates surface points, tangents, normals, velocities, and force Jacobians from common section kinematics. Euler--Poincare beam balance, moving-surface potential-flow relations, graph cotangent assembly, and the associated semidiscrete power identity are stated in a common twist--wrench convention. Collocation, pressure, equivalent-load, and structural-station sites are distinguished to expose their approximation errors. Verification gives the expected $N_d+1$ convergence order for degree-$N_d$ relative-log expansions. In a geometrically nonlinear cantilever comparison, a cubic static-manifold correction reduces mean full-record displacement error from $0.479$ to $0.255$ over four completed load cases. These results provide structural and interface-level evidence rather than validation of a complete aircraft aeroelastic prediction.

0.10

Projective Affine Body Dynamics for Multibody Systems

cs.GR ·2026-09-02 ·Zimeng Ye, Xiaowei He, Yuzhong Guo, Yin Yang, Chenfanfu Jiang +1 more
published similarity 0.48
Abstract · 12 pages

Multibody systems have widespread applications in diverse fields such as robotics, entertainment, and animation. Their capability to model and simulate intricate interactions among interconnected bodies makes them invaluable in various domains. However, complexity arises with factors like non-smooth contact handling, nonlinearity in flexible joints, and parallelization challenges. We introduce a stable and highly parallel GPU algorithm within affine body dynamics for solving constrained multibody dynamics with nonlinear constraints.Our innovation involves reformulating constrained multibody dynamics into a variational form, treating the system as a set of affine bodies connected with peridynamic bonds. This formulation provides a unified model for affine body dynamics, constraints, and contact within the peridynamics framework.It also facilitates the integration of the semi-implicit successive substitution method to solve nonlinear optimization in a global-local iterative manner. The proposed method obviates the necessity of assembling a global Hessian, rendering it highly suitable for efficient implementation on GPUs.This allows real-time simulation of intricate interactions involving both rigid and flexible bodies, encompassing contact, joint constraints, and friction.

0.36

Global Exponential Stabilization of a 3D Nonholonomic Vehicle in Spherical Coordinates

eess.SY math.OC ·2026-09-21 ·Kwang Hak Kim, Velimir Todorovski, Miroslav Krstic
published similarity 0.47
Abstract · Accepted to the 2026 IEEE Conference on Decision and Control (CDC)

Many spatial (3D) vehicles, including AUVs and fixed-wing aircraft, are effectively nonholonomic and subject to limited actuation, such that continuous time-invariant stabilization is fundamentally obstructed by Brockett's necessary condition. To overcome this obstruction, we exploit the geometric singularity of spherical coordinates to design a backstepping continuous, time-invariant feedback law that exponentially stabilizes a 3D nonholonomic vehicle actuated solely by forward surge velocity, pitch rate, and yaw rate. The resulting closed-loop region of attraction excludes only the coordinate singularity, codimension-two, measure-zero set of initial conditions in which the vehicle lies on the line through the target orthogonal to the target plane, thereby covering the largest possible domain. We further construct a strict control Lyapunov function to prove global exponential stability of the origin on this domain with a user-specified decay rate, while simultaneously preventing the system from approaching the singular set. Finally, we show that the closed-loop system is exponentially attractive to the origin in Cartesian coordinates. Numerical simulation examples in both spherical and Cartesian coordinates illustrate the effectiveness of the control law.

0.51

Nechvile-Transformed Spacecraft Dynamics and Propellant Computation in the 3-Body Problem

eess.SY math.OCmath.NA ·2026-08-29 ·Michael J. Dixon, Isaac M. Ross
publishedunusual similarity 0.46
Abstract

The uncontrolled equations of motion in the Nechvile frame for the restricted three-body problem have been well-known since at least the 1960s. It would seem that adding an external force to these equations is quite trivial: simply add an external force per mass term to the acceleration equations. Here we show that the last statement is not true. In fact, we show that the additive generic external force must be multiplied by the inverse of $(1 + e \cosθ)^3$ where $e$ is the relative eccentricity of the primaries and $θ$ is the true anomaly of the rotating frame located at the barycenter. Furthermore, when this result is combined with the mass flow rate equation, it generates several surprising results due to the mismatch between the resulting quadratic term and the cubic term in the equations of motion. This leads to a corresponding modification of the rocket equation itself. A Birkhoff-theoretic solution to an illustrative cislunar space mission problem shows propellent savings of 80% with the use of the correct cost functional. The popular quadratic cost utilizes more than $2X$ the minimum propellant consumption.

0.59

Intrinsic Path Following on $\mathsf{SO}(3)$

eess.SY math.OC ·2026-10-03 ·Adeel Akhtar
similarity 0.43
Abstract · 8 pages, 2 figures

This paper studies intrinsic path following for fully actuated rigid-body attitude dynamics over a broad class of attitude paths, namely arbitrary smooth embedded closed curves on $\mathsf{SO}(3)$. We construct a tangential--transverse state decomposition on a tubular neighborhood using normal and pullback bundle geometry. The resulting second-order dynamics admit a smooth feedback transformation that independently assigns tangential and transverse covariant accelerations. A transverse proportional--derivative law renders the path-following manifold invariant and locally uniformly exponentially stable on an explicit forward-invariant neighborhood, while leaving the tangential dynamics freely assignable. This allows independent regulation of progression along the path, stabilization of a selected attitude on the path, or tracking of a time-varying motion. For a representative fiber path, the tubular coordinates are obtained in closed form up to the natural cut-locus obstruction, and simulations illustrate point stabilization and trajectory tracking.

0.22