CS Paper Radar

Matching Architecture to Workload: Comparing RISC-V Parallel Accelerators for Energy-Efficient Embedded Computing

Luca Colombo, Luigi Ghionda, Amirhossein Kiamarzi, Yvan Tortorella, Riccardo Giunti, Niccolò Giuliani, Samuele Colmi, Angelo Garofalo, Giuseppe Tagliavini, Davide Rossi

cs.DC cs.AR ·submitted 2026-11-19 11:34 UTC · v1
benchmarkcode/data

Abstract

Embedded computing demands high performance and energy efficiency across workloads with widely different computational characteristics. Choosing the most suitable execution model therefore requires a quantitative understanding of how each model maps to different workload classes. In this paper, we compare three execution models for energy-efficient embedded computing: scalar multicore, stream ing multicore, and vector processing. We use three open-source RISC-V accelerators as representative implementations: the PULP Cluster, the Snitch Cluster, and Spatz, respectively. Their open-source hardware and software stacks enable a controlled comparison based on implementations in the same 12 nm technology and a common benchmark suite. Our results reveal that no single execution model performs best across all workload classes. Spatz delivers the greatest benefits for regular and highly vectorizable compute-intensive applications, achieving up to 4.29x higher performance and 5.17x greater energy efficiency than the other architectures. However, its effectiveness strongly depends on the availability of data-level parallelism and regular computation and memory-access patterns, making it the most sensitive to workload characteristics. The Snitch Cluster performs particularly well on applications with limited parallelism and streamable memory-access patterns, providing up to 5.53x higher performance and 1.45x greater energy efficiency. Conversely, the PULP Cluster is most effective on irregular and control-dominated applications, achieving improvements of up to 5.66x in performance and 2.80x in energy efficiency. Compared with Spatz, however, the greater flexibility offered by PULP and Snitch comes at a non-negligible cost in terms of both area and power.

Comment
Preprint submitted to the Journal of Parallel and Distributed Computing

Closest papers

Nearest neighbours by meaning across the whole index.

Compiler and Hardware Co-Design for Accelerator Architectures

cs.AR ·2026-09-24 ·Karl Herman Krause, Emad Jacob Maroun, Martin Schoeberl
similarity 0.74
Abstract · 8 pages, 4 figures

Heterogeneous accelerator architectures offer an efficient path to performance for compute-intensive workloads. However, full-stack integration remains difficult. We present EAAC (Extensible Accelerator Architecture), a flexible and extensible compiler and hardware architecture designed to lower the overhead of hardware-compiler co-development for rapid prototyping of hardware accelerators. EAAC targets static data-flow workloads with predictable memory access patterns. By using MLIR, we enable possible integration with a range of different frontends that emit MLIR. And by providing a minimal set of compiler functionality that enable necessary data-orchestration we lower the effort needed to get a simple implementation of a hardware acceleration unit up and running, while providing a relatively blank and un-opinionated starting point for further work. We validate this approach with a prototype GEMM accelerator combining a systolic array unit with an embedded RISC-V core, compiled end-to-end through the EAAC MLIR pipeline. On a synthetic fully-connected-layer workload, the accelerator achieves a 28x speedup in execution time over a RISC-V-only baseline, with the GEMM operation itself accounting for only 1.64\% of total execution time. We further characterize the compiler's hardware-semaphore allocation, showing that the number of semaphores required scales linearly with instruction count in the worst case, and identify this as a concrete target for future optimization.

0.23

Operating System Support for Accelerators as First-Class Compute Elements in Heterogeneous Systems

cs.AR cs.DCcs.OS ·2026-10-24 ·Mohammad Shahidzadeh, Lesley Shannon
similarity 0.74
Abstract · 13 pages, 12 figures

Heterogeneous systems-on-chip (SoCs) increasingly rely on domain-specific hardware accelerators (HAs) to deliver performance and energy efficiency gains beyond what general-purpose processors can provide. However, operating systems (O/S), such as Linux, assume that processors are the Compute Elements (CEs) and HAs are peripheral devices rather than specialized CEs. As a result, HA execution incurs substantial software (SW) overheads that reduce the effective benefits of hardware (HW) acceleration. This work demonstrates that significant inefficiencies arise from ``O/S peripheral device taxes'' (O/S taxes), including SW stack-accelerator communication, invocation, interrupt handling, and scheduling. We built MEERKAT, a Field-Programmable Gate Array (FPGA)-based framework for configurable multicore systems that include HAs; it allows the user to migrate Linux O/S support from SW to HW and identify, study, and quantify the impact. Here we study four major sources of O/S tax and introduce techniques to mitigate them. These include a virtual-memory-aware (VMA) communication method that enables efficient HA access to application data, a lightweight HA invocation interface, Interrupt Policy Adaptation (IPA) for dynamic polling and interrupt selection, and an HA-aware scheduler that dynamically distributes work across Central Processing Units (CPUs) and multiple HA instances. Experimental results demonstrate up to $260\times$ faster communication and $2$--$6\times$ performance improvements in wall-clock time over conventional schedulers. Furthermore, our study reveals that overall system performance depends not only on HA speed, but also on O/S overheads, resource availability, and scheduling decisions. These findings highlight the importance of treating HAs as first-class computational resources and motivate a more accelerator-centric O/S design for future heterogeneous systems.

0.15

Toward Open ISA Supercomputing: A Comparative Study of RISC-V, Arm, and x86 Architectures on HPC Workloads

cs.DC cs.ARcs.PF ·2026-10-23 ·Emanuele Venieri, Giacomo Madella, Gabriele Ceccolini, Simone Manoni, Federico Ficarelli +7 more
code/data similarity 0.72
Abstract · Preprint submitted to Future Generation Computer Systems

RISC-V is emerging as a candidate architecture for high-performance computing (HPC), but its competitiveness against established x86 and Arm processors remains difficult to assess because existing studies use different platforms, workloads, and methodologies, and rarely consider energy efficiency. Our work provides an evaluation of contemporary HPC RISC-V, Arm, and x86 processors using a common software stack and methodology. We characterize the Sophgo SG2044 and compare it with the NVIDIA Grace CPU Superchip and Intel Xeon Platinum 8480+ across four HPC benchmarks (STREAM, HPL, HPL-MxP, and HPCG) and four representative applications (iPIC3D, PLUTO, OpenFOAM, and llama$.$cpp). The version of HPL-MxP linked to OpenBLAS built and used for this work is made available as open-source software. The SG2044 reaches 8.02 GFLOP/s of FP64 performance and 7.8 GB/s of memory bandwidth per core, increasing to 294 GFLOP/s and 107 GB/s at 64 cores. L2-cache-aware process placement enables near-linear scaling up to 16 cores, beyond which memory-bandwidth saturation limits further gains. Across generations of RISC-V hardware, in the context of the Monte Cimone (MC) project, the SG2044-based MCv3 doubles both single-core performance and peak memory bandwidth relative to MCv2, while improving memory bandwidth, node-level FP64 performance, and energy efficiency by approximately 100x, 158x, and 10x, over MCv1. Against the Arm and x86 systems, the SG2044 shows 8-15x less absolute performance, reflecting its narrower vector resources and less advanced technology node, but delivers competitive scaling and energy efficiency on several workloads. Its most notable result is LLM decode, where 64-core execution provides the highest relative scaling and energy efficiency among the evaluated platforms while exceeding Intel in throughput. Our results show that RISC-V processors are closing the gap with the competition.

0.23

GPU implementation of a resource-constrained virtual machine

cs.DC cs.GR ·2026-08-17 ·Simone Li, Vladislav Brusokas, Andrei Ghita, Shuxuan Li, Wim Vanderbauwhede
benchmark similarity 0.71
Abstract · 5 pages, 5 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

One of the main reasons compute hardware becomes obsolete is software bloat: resource requirements increase for every iteration of a software product. Resource constrained VMs are one way to combat software bloat as they post a hard limit on the resources and so force the programmer to be frugal. In this paper we explore the deployment of one such resource constrained VM, Uxn, on GPU. We show that for competitive performance it is essential to make use of the GPU data parallelism. We present an OpenMP-style parallelism API for Uxntal, the stack-based assembly-style language for the Uxn platform. We demonstrate that exemplar code using our API can run at comparable performance even on an integrated GPU. Specifically, our evaluation results show that using this approach improves performance on the compute-intensive Stencil benchmark with 19x and frame rate on the graphics-intensive Bunnymark benchmark with 7x. In practice, all laptops and desktops and even mobile devices have a GPU and our work shows that they can be used to execute frugal workloads effectively.

0.25

Superscalar Loop Processors

cs.AR cs.DC ·2026-11-01 ·Luca Colagrande, Pascal Etterli, Luca Benini
top venuecode/data similarity 0.70
Abstract · Accepted at MICRO 2026

To sustain the computational demands of modern ML and HPC workloads, programmable accelerators integrate large arrays of processing elements (PEs), typically built around single-issue in-order cores to maximize integration density and energy efficiency. As a result, each PE's instruction throughput is upper-bounded at one instruction per cycle (IPC), often suffering from significant underutilization of its functional units (FUs). Conventional superscalar processors can improve FU utilization by increasing IPC, but they typically incur substantial area and energy overheads. This work proposes the Superscalar Loop Processor (SLP) architecture, a lightweight approach to superscalar execution that targets regular, compute-intensive loop kernels. We present the SLP execution model, which exploits the static structure of these workloads to enable efficient multiple-issue execution without the complexity of dynamic out-of-order scheduling. We demonstrate the SLP architecture through an open-source prototype implementation, Schnizo, developed as an enhancement of a tiny RV32I core with floating-point support. Across several ML and HPC microkernels, Schnizo achieves substantially higher IPC and FPU utilization than the scalar baseline while retaining the efficiency of lightweight in-order designs. These results demonstrate that SLPs can provide an efficient architectural solution for programmable accelerators targeting regular, compute-intensive workloads.

0.51

HELIX: HEterogeneous LLM Inference with FleXible and Fine-Grained Partitioning

cs.SE ·2026-11-04 ·Victoria Clerico, William Simon, Corey Liam Lammie, Orhun Görkem, Athanasios Vasilopoulos +4 more
code/data similarity 0.70
Abstract

LLM inference is inherently heterogeneous, with performance bottlenecks shifting throughout inference phases down to individual operators. This has motivated heterogeneous serving systems that disaggregate execution across specialized accelerators, typically through fixed partitions such as prefill/decode or attention/FFN. However, these approaches commit to a partitioning strategy in advance, limiting their ability to adapt to different workloads and model architectures while forcing emerging accelerators into predefined roles. We present HELIX, a vLLM-based software stack that discovers, compiles and dispatches workload-aware partitions across heterogeneous accelerators at the operator granularity. At engine initialization, HELIX automatically determines hardware-specific operator placements that minimize execution latency, accounting for profiled execution costs, communication overheads, device capabilities, and memory constraints. It combines dynamic programming, piecewise compilation, and heterogeneous subgraph dispatch, enabling accelerators with partial operator coverage to participate in LLM inference without predefined model partitions. HELIX provides an open-source unified framework for exploring, evaluating, and integrating heterogeneous accelerators for LLM inference, lowering the barrier to emerging hardware by exposing them as subgraph executors. In systems combining H100 and B200 GPUs with emerging accelerators, HELIX resolves LLM partitions that multi-query decoding latency by up to 3$\times$ for dense and sparse transformer models and up to 3.5$\times$ for hybrid state-space models, relative to standard attention-FFN disaggregation.

0.31

Toki: Profiling HBM Performance on FPGA Systems with RISC-V Soft Cores and PCIe Host DMA Traffic

cs.AR ·2026-09-22 ·Andrea Galimberti, Andrea Motta, Gianni Antichi, Davide Zoni
publishedcode/data similarity 0.69
Abstract · Presented at the 63rd ACM/IEEE Design Automation Conference (DAC '26), July 26-29, 2026, Long Beach, CA, USA; 7 pages, 7 figures, 2 tables

Programmable RISC-V soft cores are becoming more widespread in data-center scenarios, making it crucial to design efficient systems that deploy them on FPGA chips with HBM memory. Toki, released as open source, is the first hardware-software framework that enables profiling the performance of HBM on FPGA accelerator cards by jointly considering (i) the execution of workloads on RISC-V soft cores instantiated on the FPGA and (ii) the injection of memory traffic from the host system via DMA over PCIe, providing insights that cannot be obtained with synthetic traffic generators alone. Extensive experiments target an AMD Alveo U55C card, deploying up to 60 RISC-V compute cores and stressing its HBM2 memory through real-world applications and microbenchmarks with user-defined access patterns. Results showcase how Toki can effectively profile the impact on HBM performance of the compute cores' organization, the workload's memory access patterns, data locality, contention over the memory controllers, and host traffic.

0.36

Effects of Hybrid CPU and Cache Architectures on Parallel HPC and Cloud Applications

cs.DC ·2026-08-24 ·Nanda Velugoti, Joseph Manzano, Nathan Tallent, Kyle Hale
similarity 0.69
Abstract

Hybrid CPU architectures have entered the mainstream desktop computing with the announcement of Intel's Alderlake architecture. Such a transition to heterogeneous CPU architecture has various performance and power implications on existing parallel workloads. In this paper we study the effects and impact of hybrid core and cache architecture on the performance of highly parallel HPC workloads. We also illustrate interesting thread scaling behavior for parallel workloads and describes the reason for such behavior both qualitatively and quantitatively. We also explore the impact of hybrid cache architecture on parallel shared data HPC applications. Finally, we illustrate that 1) parallel applications with work imbalance (i.e., threads in application perform different amount of work) scale better across hybrid cores when thread affinity is disabled and 2) hybrid cache architecture has very little impact on parallel shared data applications except for some workloads with locks. This work lays the foundation for our future work which focuses on extending this work to model parallel workloads and hybrid CPU architectures to improve their performance in terms of execution time, memory usage and power consumption.

0.07