CS Paper Radar

Learning optimal gaits and styles for terrain-adaptive quadruped locomotion

Guillaume Bellegarda, Auke Ijspeert

cs.RO ·submitted 2026-11-19 11:46 UTC · v1
code/data

Abstract

Animals use many different gaits to locomote at different speeds across varying terrains. A longstanding question in biology and robotics is: which gait is best? This question is most often addressed from an energy-efficiency perspective on flat terrain, leaving open how the answer depends on terrain and on the criterion optimized. Here we show that gait optimality is determined jointly by terrain, performance metric, and velocity. We use deep reinforcement learning and networks of abstract oscillators, modeling spinal central pattern generators, to learn 11 quadrupedal gaits across diverse challenging terrains, together with the locomotion style (base height, foot ground clearance, foot offsets) that each requires. A second policy then selects among them to optimize a user-specified criterion such as cost of transport, base stability, or joint smoothness. Across these performance metrics and within this repertoire, every gait is optimal under at least one terrain-metric-velocity combination. The framework adapts zero-shot to gait couplings and styles never seen during training, to terrains far beyond the training distribution, and to larger quadrupeds five times the training mass. With a single additional pitch-tracking reward term, the same gait couplings also support bipedal-mode locomotion. Our method provides a general and systematic way to produce expressive locomotion and to select the gait best suited to a given terrain and criterion. Project page: https://guillaume10.github.io/terrain-gaits.

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Efficient Gait Adaptation via Hierarchical Reinforcement Learning for Quadrupedal Locomotion Across Diverse Terrains

cs.RO cs.LG ·2026-10-07 ·Ammar Issa, Anubhav Singh, Anton Tsaritsin, Sergey Kolyubin
similarity 0.78
Abstract · 9 pages. Submitted to IEEE ICRA 2027. Ammar Issa, Anubhav Singh, and Anton Tsaritsin contributed equally

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

0.27

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.75
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

A Trainable CPG Framework for Quadruped Locomotion

cs.RO ·2026-10-27 ·Xiyan Liu, Yide Liu, Guoyong Mao, Shaoxing Qu
similarity 0.74
Abstract

We present CPG-ENN, a trainable quadruped locomotion framework that combines explicit neural coordination with learned motion realization. A symmetry-based eight-neuron central pattern generator (CPG) supplies gait rhythms, while a pretrained, leg-shared execution neural network (ENN) maps rhythmic signals and trajectory parameters to joint-angle references without online inverse kinematics. A single feedback policy modulates six physically interpretable trajectory variables. The controller tracks planar velocity and yaw-rate commands across walk, trot, pace, bound, and pronk without gait-specific learned controllers or transitionspecific rewards. Simulation yields 99.39% transition success across all 20 directed gait pairs and all source-target speed combinations from {0.5, 1.0, 1.5, 2.0} m/s. Ablations show high cross-gait transition feasibility without transition exposure; exposure mainly refines gait acquisition and velocity transients. Comparisons with AllGaits and Walk These Ways demonstrate accurate gait-speed regulation, and Unitree Go2 experiments validate five gaits and their transitions.

0.21

GLAMDRING: Gait Learning And Morphology co-Design via Reinforcement LearnING of CPGs

cs.RO cs.LG ·2026-09-16 ·Amogh Joshi, Kaushik Roy
similarity 0.72
Abstract

Robots are moving out of the structured factory floor and into unstructured environments such as disaster sites, planetary surfaces, and agricultural fields, for which the right robot often does not yet exist. We present GLAMDRING, a framework that synthesizes the optimal robot for a locomotion task and, jointly, learns the controller that drives it. For the given specifications of forward-velocity bounds, a per-actuator power budget, an actuator library, and a payload requirement, GLAMDRING returns a matched quadruped morphology (link geometry and per-joint actuators) and a Hopf-oscillator Central Pattern Generator (CPG) gait policy. We rank feasible designs against a target design objective, viz., maximum speed, minimum Cost of Transport (CoT), or max Payload Margin. Because body and locomotion are coupled, the optimal morphology dictates how a robot is driven, while optimal gait depends on the physical body. We train a small number of CPG policies by reinforcement learning across the space of candidate morphologies, co-learning the gait with the underlying robot hardware. Link lengths and actuators are then resolved post-hoc from the policy's logged operating envelope, reducing synthesis cost to a small, fixed number of reinforcement-learning runs instead of one per candidate. Our experiments show three key findings: co-designing body and gait is necessary to satisfy locomotion constraints; actuator-envelope feasibility, rather than locomotion success alone, determines realizable payload capacity; and canonical animal gaits emerge naturally in most designs from morphology and constraints alone. A real-world demonstration further highlights the efficacy of our work.

0.24

OmniMimic: Dynamics-completed Motion Augmentation for Multi-style Omnidirectional Quadruped Locomotion

cs.RO cs.CVeess.IV ·2026-09-17 ·Sheng Wu, Guoqiang Zhao, Zhe Yang, Fei Teng, Zhikun Zhou +5 more
code/data similarity 0.71
Abstract · The project page is at https://OmniMimic.github.io

Animal demonstrations provide quadruped robots with natural and distinctive gait styles that are difficult to specify through hand-crafted rewards. However, their narrow directional coverage leaves little style-consistent supervision for backward, lateral, and turning commands. We present OmniMimic, a training framework that turns directionally limited animal demonstrations into a single multi-gait policy over target per-axis velocity ranges. OmniMimic first combines temporal reversal, constrained dynamics completion, and sagittal reflection to construct robot-specific kinematic and physical supervision beyond the observed directions. It then expands commands progressively from the demonstrated velocity distribution toward the target per-axis bounds, and uses a shared actor with soft-gated, gait-specialized residual experts to balance reusable locomotion skills with gait-specific corrections. Across four gaits in simulation, OmniMimic reduces mean foot-position RMSE at forward and backward reference velocities by 12.9% and velocity-tracking RMSE on a uniform Cartesian command grid by 63.1%, compared with the matched APEX baseline. The project page is at https://OmniMimic.github.io.

0.35

Around the World: Unified Learned Locomotion on a 270 g Continuous-Rotation Quadruped

cs.RO ·2026-10-02 ·Arturo Flores Alvarez, Nathan Lintu, Dennis Hong
similarity 0.70
Abstract · 13 pages, including appendices. Project website: https://submissionreview.github.io/around-the-world/

Closed-loop learned locomotion is established on commercial quadrupeds but remains uncommon at the sub-kilogram scale. Continuous-rotation legs give MiNI-Q, a 270 g quadruped, access to supporting configurations on either side of the body. We exploit this range with a single posture-conditioned reinforcement-learning policy that runs entirely onboard. A continuous joint-space reference on the torus $T^8$ and its gravity-conditioned transformation connect upright walking, inverted walking, and landing recovery without state machines or phase switching. Coordinated posture and release curricula train this behavior family; identified actuation, cross-engine validation, and embedded execution support hardware transfer. The same sub-100k-parameter network tracks forward velocity with RMSE of 0.037 m/s upright and 0.050 m/s inverted, resumes walking in 24 of 30 release trials, and operates with four interchangeable foot geometries across four indoor surfaces. Hardware experiments and simulation ablations connect these capabilities to the representation, conditioning, and training choices that exploit the platform's motion range. Demonstration videos and supplementary material are available on the project website: https://submissionreview.github.io/around-the-world/.

0.33

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

cs.RO ·2026-09-01 ·Annika Schmidt, Davide Calzolari, Arne Sachtler, Florian Loeffl, Daniel Seidel +11 more
similarity 0.70
Abstract

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

0.26

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.70
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21