CS Paper Radar

Automated generation of experimentally validated digital twins for desiccant-based low-dew-point air-conditioning systems from declarative topology specifications

Younghwan Joo, Jeonghoon Han, Sang Hyun Oh, Soosik Bang, Sung-il Kim

eess.SY cs.CE ·submitted 2026-08-10 00:09 UTC · v1
published

Abstract

In battery manufacturing, the low-dew-point air conditioning of dry rooms is among the largest energy consumers, and a physics-based digital twin offers insight for operating-point optimization beyond the installed monitoring points. Building one and calibrating it to field data each demand distinct expertise, which limits industrial uptake. We present a framework that generates a dynamic digital twin of an HVAC system from a declarative topology specification, concise enough to draft from a natural-language plant description, compiled against a purpose-built physical component library with wiring, solver, and telemetry synthesized automatically. The models carry equipment-level physics: the desiccant wheel couples heat and mass transfer through an interchangeable sorption-isotherm component, so an undisclosed commercial sorbent is calibrated as an effective isotherm rather than asserted as a material. For experimental validation we built an industrial-grade, ten-component low-dew-point system whose commercial desiccant-wheel unit holds a chamber near -40 °C frost point, and operated it in both dehumidification and bypass regimes. Generation reached a runnable model fifteen times faster than expert manual construction, and a single parameter set, fitted only to three closed-loop humidity nodes, predicts the bypass regime within 0.1 °C, the reactivation-heater power within 5%, and measured input-step responses. Identifiability analysis shows why this is prediction, not fitting: ordinary operating points constrain only one parameter combination, and the deep-dry equilibrium level of the recirculating loop supplies the missing signal. The framework shortens the path from plant description to measurement-validated twin; its criteria-based calibration is a step toward twins calibrated, not only constructed, automatically.

Closest papers

Nearest neighbours by meaning across the whole index.

A four-level executable validation protocol for evaluating LLM-generated topology specifications of physics-based HVAC digital twins

eess.SY cs.AIcs.LGcs.SE ·2026-11-19 ·Younghwan Joo, Jeonghoon Han, Sanghyun Oh, Soosik Bang, Sung-il Kim
similarity 0.67
Abstract

Physics-based digital twins of air conditioning, a principal energy consumer in manufacturing and buildings, can be generated automatically from a declarative specification of its equipment, connections, and sizing. Large language models (LLMs) now write such specifications from plain-language descriptions. Evaluations of these specifications stop at parse success, completed runs, or textual similarity, and cannot reject a model that converges in simulation but is physically wrong. In this study, a four-level protocol is proposed that tests whether an LLM-written specification not only executes but also yields a physically valid digital twin. Each specification is executed through static validity, model build, simulation convergence, and behavioral equivalence with a hidden reference model within bands calibrated by $\pm$20% sizing perturbations. The protocol was applied to eight LLMs and fourteen HVAC topologies, five describing an existing low-humidity test chamber. To test for authorship bias, engineers and a second model family also described six topologies. Within three repairs, seven of eight models built in 98.6 to 100% of trials, with simulations converging in at least 80.0%, but reached behavioral equivalence in only 50.0 to 98.6%. About half of the failed trials converged, but not to the reference steady state, mostly in desiccant rotor systems. Pooled pass rates varied by under five percentage points across description authors. These results imply that the physics hardest to model in each field, here the desiccant rotor, must enter the generation framework as validation levels. The protocol can be adapted to other fields that generate executable digital twins from declarative specifications.

0.27

An Exemplar of a Digital Twin in Mechanical Engineering: Understanding Model Hybridization

cs.SE ·2026-09-15 ·Mahussi Datongnon, Hubert Lejeune, Yoann Jus, Benoit Combemale, Julien Deantoni
top venue similarity 0.60
Abstract

Digital Twins (DTs) are widely adopted across a variety of application domains. In industrial sectors, particularly in mechanical engineering, they accelerate product development, reduce risks, enable early issue prediction, and lower sustainment costs . In practice, DTs increasingly integrate physics-based (deductive) and data-driven (inductive) models into hybrid models combining the complementary strengths of both modeling paradigms. In this paper, we refer to this integration paradigm as hybridization. Despite this trend, the engineering of hybrid DTs that is, remains insufficiently documented. Hybridization is often introduced in an ad hoc manner, and its implementation is only partially made explicit, which limits reproducibility and transferability. This paper reports on the development of an existing fluidic loop digital twin at Centre Technique des Industries M{é}canique (CETIM). The DT is described using the characterization framework of Gil et al., providing a structured view across its lifecycle dimensions. To make hybridization explicit, the case is further analyzed through a complementary characterization structured along two dimensions: motivation and realization. The resulting description provides a traceable account of hybridization decisions and supports the documentation and transfer of hybrid DT engineering practices.

0.46

Ruleless Digital Twins: Toward Declarative Decision-Making Through Standardized Frameworks and Technologies

cs.SE ·2026-10-07 ·Ivan Spajić, Volker Stolz
similarity 0.59
Abstract · 47 pages (bibliography included), expanded version of the Spajić and Stolz (2026) DataMod paper

Digital twins (DTs) can be thought of as digital counterparts of physical objects, or more generally, twinning targets (TTs). To enact changes on and optimize for properties of their TTs, DTs use an element of decision-making. Traditionally, many domains, such as home automation, utilize rule-based decision-making models to imperatively define DT actions based on desired TT conditions. With evolving user specifications, rule-based models have become increasingly complex to develop and maintain, particularly in scenarios involving optimizations under dynamically changing systems, such as those affected by weather or dynamic energy pricing. We present an alternative in the form of ruleless digital twins (RDTs) that automatically produce optimal decisions with respect to purely declarative user specifications, similarly to the well-established ruleless approach of model predictive control. They do so through a combination of a semantic knowledge base, logical inference, simulation models, and an autonomic computing architecture, each exclusively based on a widely-used standard or technology. We evaluate our proof of concept through an incubator case study and experiments against a rule-based bang-bang controller in the context of a virtual office room environment. Results show core that RDT functionality performs better than the control in terms of maintaining desired room temperatures and minimizing energy costs under dynamically changing spot pricing. Additionally, due to combinatorial decision tree construction, RDTs require considerable computational power for longer prediction horizons, although their applicability to specific problem domains (and use of shorter horizons) ultimately falls on their users.

0.31

A Human-Centric Adaptive Multi-Fidelity Digital Twin Framework for Cyber-Physical Systems

cs.HC eess.SY ·2026-11-18 ·Clarisa Grijalva-Lugo, Yu-Zheng Lin, Shalaka Satam, Sicong Shao, Jesus Pacheco +2 more
similarity 0.53
Abstract · 20 pages, 3 figures, 11 tables; submitted to Advanced Engineering Informatics

Digital twins of cyber-physical systems must operate with scarce data, on assets that change after deployment, and for humans whose needs differ, yet existing implementations fix fidelity at design time and do not match the representation to the human or the task. This paper proposes a human-centric adaptive multi-fidelity digital twin framework that models the evolving human, the physical twin, and the digital twin core, and adds a human inference and adaptation function that estimates the human state, predicts the response, and adapts the representation. The framework defines low-, medium-, and high-fidelity tiers distinguished by adaptivity and by coupling, quantified as the ratio of the digital twin latency to the duration of the process step it follows. Three proof-of-concept instantiations are evaluated: a virtual reality tutor, a computer numerical control milling model, and an industrial training station. The low tier estimated learner sentiment with an accuracy of 0.86. The forecasters of the milling model and the training station, both medium-tier, showed a normalized error decline of 0.39 to 0.89 and a human adaptation gain of 1.16 to 1.51, but their latency exceeded the physical process step by 25 to 87 times. Only the station's vision model met the physical step. The tiers are separated by which functions adapt and where the latency constraint lies, not by a monotone increase in gain or coupling.

0.29

A Cyber-Physical Machine Tool Framework with a Real-Time Machining Process Digital Twin

cs.HC ·2026-08-30 ·Khalil Chakal, Tero Kaarlela, Jose Outeiro, Carlos Andrade
similarity 0.51
Abstract

Digital Twins (DTs) have emerged as a key technology for improving the monitoring, optimization, and automation of manufacturing systems. However, existing Cyber-Physical Machine Tool (CPMT) implementations primarily represent the machine tool, while the machining process remains only partially synchronized with its physical counterpart. This paper extends a previously presented CPMT framework by introducing a hierarchical DT framework that simultaneously maintains DTs of both the machine tool and the machining process. The proposed framework integrates real-time CNC operational data, a voxel-based workpiece representation, synchronized process vibration measurements, and a persistent part DT repository for process replay, traceability, and future synthetic data generation. Experimental evaluation demonstrated real-time operation at a 20 Hz machining-state update rate, interactive visualization exceeding 100 frames per second, and a mean depth reconstruction error of 0.16 mm. The implementation provides a foundation for AI-assisted machining applications while preserving the machine tool monitoring and teleoperation capabilities.

0.23

Mixed-Reality Feedback Control: Towards Blending of Control and Digital Twinning

cs.RO eess.SY ·2026-10-14 ·Melisa Soydan, Mario Gleirscher
similarity 0.51
Abstract · 19 pages, 7 figures

Technologies, such as co-simulation, in particular, digital twins (DTs) are used for comprehensive and reliable prototyping, verification and validation (V&V) of control systems. There, the combination of feedback loops across multiple realities (e.g., simulations, physical setups) enables various forms of experimentation with robots and autonomous systems. However, the handling of multiple realities requires a more specific support by the modelling techniques used in control engineering. To streamline the latter in the system life cycle, we propose a framework for mixing (i.e., fusing, defusing) control input and feedback signals (i.e., stimuli, responses) in simultaneously operated plants for multiple realities.

0.29

Object Model Analysis of a Supercomputer with Digital Twin

cs.DC ·2026-09-11 ·Shilpika Shilpika, George K. Thiruvathukal, Venkatram Vishwanath, Michael E. Papka
similarity 0.51
Abstract

Operators and developers need a mental model of both the structure and the live behavior of a large supercomputer, but its physical layout, logical organization, and streams of per-node telemetry are difficult to relate to one another, making it hard to trace a metric or event back to a specific hardware component. We present DAT, an interactive three-dimensional digital analytics twin of a compute cluster built in a real-time game engine, Unreal Engine. DAT expands a compact, parametric description of a supercomputer, a reusable Digital Twin Prototype (DTP), into a navigable Digital Twin Instance (DTI) that mirrors its physical containment hierarchy of racks, chassis, blades, and network links, encoding each node's role and health in its appearance, while a lightweight event-driven simulator animates job and hardware activity over a virtual clock. Our current implementation adds a two-path node-selection mechanism, unifying direct 3D pointing with command-shell queries, that opens an in-world visual-analytics panel beside any selected component showing summary statistics and live, time-varying metrics. We describe this architecture, report qualitative behavior from the working prototype, and outline the path toward driving the panels with recorded telemetry and in-situ anomaly detection.

0.23

Heating in human-HVAC interaction for smart homes: An interdisciplinary overview

cs.HC cs.AIcs.SIeess.SY ·2026-09-20 ·Delong Korus-Du, Gunnar Stevens, Alexander Boden, Lenneke Kuijer, Apostolos K. Vavouris +4 more
published similarity 0.50
Abstract

As part of HVAC systems, residential heating provides foundational infrastructure for human habitation in cold weather. However, research on how residents interact with HVAC systems, particularly heating systems, remains fragmented across architecture, engineering, informatics, physiology, psychology, sociology, and design. Based on 541 studies from these fields, this review integrates interdisciplinary research on Heating in Human-HVAC Interaction in smart homes.The resulting synthesis is conceptualized through the Situated Interaction Dynamics of control and feedback between users and systems. User-initiated interactions involve monitoring past and present system performance and planning future operation, while system-initiated interactions rely on sensor networks to trigger automation or provide information enabling user action. These interaction dynamics connect Residents' Experience and Practices with Heating in HVAC System Mechanics. Residents' Experience and Practices include thermal comfort and energy management, where thermal comfort involves both individual physiological and psychological experiences of indoor climate and social practices shaped by norms, empathy, and negotiation among cohabitants. Heating in HVAC System Mechanics includes thermal conditions and energy performance. Thermal conditions concern the regulation of air temperature, mean radiant temperature, air velocity, and relative humidity, while energy performance concerns efficiency and environmental impact. This overview highlights four interdisciplinary tensions: sensed versus lived conditions, personalization versus negotiation, efficiency versus health, and automation versus agency. The resulting framework offers a conceptual lens to interpret heating interactions and design Human-HVAC Interaction that balances IEQ-driven healthy thermal conditions, affordability, and sustainability.

0.44