CS Paper Radar

An Exemplar of a Digital Twin in Mechanical Engineering: Understanding Model Hybridization

Mahussi Datongnon, Hubert Lejeune, Yoann Jus, Benoit Combemale, Julien Deantoni

cs.SE ·submitted 2026-09-15 14:38 UTC · v1
top venue

Abstract

Digital Twins (DTs) are widely adopted across a variety of application domains. In industrial sectors, particularly in mechanical engineering, they accelerate product development, reduce risks, enable early issue prediction, and lower sustainment costs . In practice, DTs increasingly integrate physics-based (deductive) and data-driven (inductive) models into hybrid models combining the complementary strengths of both modeling paradigms. In this paper, we refer to this integration paradigm as hybridization. Despite this trend, the engineering of hybrid DTs that is, remains insufficiently documented. Hybridization is often introduced in an ad hoc manner, and its implementation is only partially made explicit, which limits reproducibility and transferability. This paper reports on the development of an existing fluidic loop digital twin at Centre Technique des Industries M{é}canique (CETIM). The DT is described using the characterization framework of Gil et al., providing a structured view across its lifecycle dimensions. To make hybridization explicit, the case is further analyzed through a complementary characterization structured along two dimensions: motivation and realization. The resulting description provides a traceable account of hybridization decisions and supports the documentation and transfer of hybrid DT engineering practices.

Journal ref
EDTconf 2026 - International Conference on Engineering Digital Twins, Oct 2026, M{á}laga, Spain

Closest papers

Nearest neighbours by meaning across the whole index.

Automated generation of experimentally validated digital twins for desiccant-based low-dew-point air-conditioning systems from declarative topology specifications

eess.SY cs.CE ·2026-08-10 ·Younghwan Joo, Jeonghoon Han, Sang Hyun Oh, Soosik Bang, Sung-il Kim
published similarity 0.60
Abstract

In battery manufacturing, the low-dew-point air conditioning of dry rooms is among the largest energy consumers, and a physics-based digital twin offers insight for operating-point optimization beyond the installed monitoring points. Building one and calibrating it to field data each demand distinct expertise, which limits industrial uptake. We present a framework that generates a dynamic digital twin of an HVAC system from a declarative topology specification, concise enough to draft from a natural-language plant description, compiled against a purpose-built physical component library with wiring, solver, and telemetry synthesized automatically. The models carry equipment-level physics: the desiccant wheel couples heat and mass transfer through an interchangeable sorption-isotherm component, so an undisclosed commercial sorbent is calibrated as an effective isotherm rather than asserted as a material. For experimental validation we built an industrial-grade, ten-component low-dew-point system whose commercial desiccant-wheel unit holds a chamber near -40 °C frost point, and operated it in both dehumidification and bypass regimes. Generation reached a runnable model fifteen times faster than expert manual construction, and a single parameter set, fitted only to three closed-loop humidity nodes, predicts the bypass regime within 0.1 °C, the reactivation-heater power within 5%, and measured input-step responses. Identifiability analysis shows why this is prediction, not fitting: ordinary operating points constrain only one parameter combination, and the deep-dry equilibrium level of the recirculating loop supplies the missing signal. The framework shortens the path from plant description to measurement-validated twin; its criteria-based calibration is a step toward twins calibrated, not only constructed, automatically.

0.52

Missing Dimensions: Integrating Human and Social Systems into Digital Twin Engineering

cs.SE ·2026-09-10 ·Francis Bordeleau, Mark van den Brand
similarity 0.60
Abstract

Digital twins (DTs) have emerged as a key technology at the core of digital transformation, yet their engineering practice remains too narrowly focused on engineered and natural systems. This paper argues that four system dimensions must be explicitly recognized in DT engineering: Engineered, Natural/Biological, Human, and Social. Each dimension brings distinct properties, modeling requirements, and ethical obligations that fundamentally shape what a DT must represent and how it must be built. We further argue that as DTs extend into the Human and Social dimensions, the emphasis should shift from automated control toward decision support and occupant empowerment. We illustrate our arguments using a smart building as a running example and identify four open research challenges for multi-dimensional DT engineering.

0.30

A Cyber-Physical Machine Tool Framework with a Real-Time Machining Process Digital Twin

cs.HC ·2026-08-30 ·Khalil Chakal, Tero Kaarlela, Jose Outeiro, Carlos Andrade
similarity 0.56
Abstract

Digital Twins (DTs) have emerged as a key technology for improving the monitoring, optimization, and automation of manufacturing systems. However, existing Cyber-Physical Machine Tool (CPMT) implementations primarily represent the machine tool, while the machining process remains only partially synchronized with its physical counterpart. This paper extends a previously presented CPMT framework by introducing a hierarchical DT framework that simultaneously maintains DTs of both the machine tool and the machining process. The proposed framework integrates real-time CNC operational data, a voxel-based workpiece representation, synchronized process vibration measurements, and a persistent part DT repository for process replay, traceability, and future synthetic data generation. Experimental evaluation demonstrated real-time operation at a 20 Hz machining-state update rate, interactive visualization exceeding 100 frames per second, and a mean depth reconstruction error of 0.16 mm. The implementation provides a foundation for AI-assisted machining applications while preserving the machine tool monitoring and teleoperation capabilities.

0.23

A four-level executable validation protocol for evaluating LLM-generated topology specifications of physics-based HVAC digital twins

eess.SY cs.AIcs.LGcs.SE ·2026-11-19 ·Younghwan Joo, Jeonghoon Han, Sanghyun Oh, Soosik Bang, Sung-il Kim
similarity 0.56
Abstract

Physics-based digital twins of air conditioning, a principal energy consumer in manufacturing and buildings, can be generated automatically from a declarative specification of its equipment, connections, and sizing. Large language models (LLMs) now write such specifications from plain-language descriptions. Evaluations of these specifications stop at parse success, completed runs, or textual similarity, and cannot reject a model that converges in simulation but is physically wrong. In this study, a four-level protocol is proposed that tests whether an LLM-written specification not only executes but also yields a physically valid digital twin. Each specification is executed through static validity, model build, simulation convergence, and behavioral equivalence with a hidden reference model within bands calibrated by $\pm$20% sizing perturbations. The protocol was applied to eight LLMs and fourteen HVAC topologies, five describing an existing low-humidity test chamber. To test for authorship bias, engineers and a second model family also described six topologies. Within three repairs, seven of eight models built in 98.6 to 100% of trials, with simulations converging in at least 80.0%, but reached behavioral equivalence in only 50.0 to 98.6%. About half of the failed trials converged, but not to the reference steady state, mostly in desiccant rotor systems. Pooled pass rates varied by under five percentage points across description authors. These results imply that the physics hardest to model in each field, here the desiccant rotor, must enter the generation framework as validation levels. The protocol can be adapted to other fields that generate executable digital twins from declarative specifications.

0.27

A Human-Centric Adaptive Multi-Fidelity Digital Twin Framework for Cyber-Physical Systems

cs.HC eess.SY ·2026-11-18 ·Clarisa Grijalva-Lugo, Yu-Zheng Lin, Shalaka Satam, Sicong Shao, Jesus Pacheco +2 more
similarity 0.56
Abstract · 20 pages, 3 figures, 11 tables; submitted to Advanced Engineering Informatics

Digital twins of cyber-physical systems must operate with scarce data, on assets that change after deployment, and for humans whose needs differ, yet existing implementations fix fidelity at design time and do not match the representation to the human or the task. This paper proposes a human-centric adaptive multi-fidelity digital twin framework that models the evolving human, the physical twin, and the digital twin core, and adds a human inference and adaptation function that estimates the human state, predicts the response, and adapts the representation. The framework defines low-, medium-, and high-fidelity tiers distinguished by adaptivity and by coupling, quantified as the ratio of the digital twin latency to the duration of the process step it follows. Three proof-of-concept instantiations are evaluated: a virtual reality tutor, a computer numerical control milling model, and an industrial training station. The low tier estimated learner sentiment with an accuracy of 0.86. The forecasters of the milling model and the training station, both medium-tier, showed a normalized error decline of 0.39 to 0.89 and a human adaptation gain of 1.16 to 1.51, but their latency exceeded the physical process step by 25 to 87 times. Only the station's vision model met the physical step. The tiers are separated by which functions adapt and where the latency constraint lies, not by a monotone increase in gain or coupling.

0.29

Mixed-Reality Feedback Control: Towards Blending of Control and Digital Twinning

cs.RO eess.SY ·2026-10-14 ·Melisa Soydan, Mario Gleirscher
similarity 0.56
Abstract · 19 pages, 7 figures

Technologies, such as co-simulation, in particular, digital twins (DTs) are used for comprehensive and reliable prototyping, verification and validation (V&V) of control systems. There, the combination of feedback loops across multiple realities (e.g., simulations, physical setups) enables various forms of experimentation with robots and autonomous systems. However, the handling of multiple realities requires a more specific support by the modelling techniques used in control engineering. To streamline the latter in the system life cycle, we propose a framework for mixing (i.e., fusing, defusing) control input and feedback signals (i.e., stimuli, responses) in simultaneously operated plants for multiple realities.

0.29

A Multi-Viewpoint Modeling Framework for Digital Twin Integration and Reuse with LLM-Assisted Compatibility Analysis

cs.SE ·2026-08-24 ·Nafiseh Soveizi, Milan Kopp, Parinaz Rashidi, Qing Shan, Geerten M. Hengeveld +2 more
similarity 0.55
Abstract · 45 page, 14 figs, 6 tables, 2 Appendix, Submitted to the International Journal on Software and Systems Modeling (SoSyM)

Digital Twin (DT) ecosystems integrate heterogeneous computational models to represent complex systems under evolving, purpose-specific objectives. Systematic reuse of existing high-quality models and datasets is essential for scalable DT development, yet is constrained by heterogeneity in semantic intent, data structures, behavioral interfaces, and execution environments. As a result, integration becomes a cross-model, cross-view consistency problem that is hard to predict, quantify, and compare across design choices. Existing standards and integration platforms address these concerns separately, offering limited support for structured, purpose-aware compatibility assessment and early feasibility analysis when models are reused under new DT objectives. This paper introduces a multi-viewpoint integration modeling framework grounded in the Reference Model of Open Distributed Processing (RM-ODP). The framework structures integration-relevant knowledge across domain, information, computational, engineering, and technology viewpoints, representing cross-view dependencies as explicit, machine-actionable metadata. It comprises (i) a viewpoint-structured Model Metamodel for systematic model description and discovery, and (ii) a pattern-aware Mismatch Detector that operationalizes cross-view compatibility constraints via integration patterns, combining deterministic rule generation with Large Language Model (LLM)-assisted reasoning. This enables systematic identification of semantic, informational, and runtime inconsistencies and supports reasoning about integration feasibility and effort before implementation. Expert validation and an environmental modeling case study show that the approach enables structured compatibility reasoning, improves transparency of integration assumptions, strengthens cross-view interoperability, and supports scalable reuse in heterogeneous DT ecosystems.

0.30

Towards an Asset Administration Shell Maturity Model

cs.SE eess.SY ·2026-09-15 ·Carsten Ellwein, David Dietrich, Rozana Cvitkovic, Andreas Wortmann
top venuecode/data similarity 0.55
Abstract

The Asset Administration Shell (AAS) is increasingly recognized as a fundamental model for the realization of and data exchange between digital twins in manufacturing. An AAS defines a hierarchical data structure to represent any type of asset throughout its entire lifecycle. In the context of AAS-based systems, comparing different AAS instances constitutes a practical challenge, as neither a widely accepted methodological framework nor a maturity model are available to systematically support such analyses. To address this gap, we propose a novel concept of AAS maturity that characterizes the extent to which established digital twin criteria are met and thus enabling comparability of AAS instances. The concepts are derived from the literature and applied through exemplification. These emerging results enable practitioners and researchers to systematically compare AAS instances and support the identification and assessment of further development steps in the digital twin engineering process.

0.81