CS Paper Radar

Towards an Asset Administration Shell Maturity Model

Carsten Ellwein, David Dietrich, Rozana Cvitkovic, Andreas Wortmann

cs.SE eess.SY ·submitted 2026-09-15 12:19 UTC · v1
top venuecode/data

Abstract

The Asset Administration Shell (AAS) is increasingly recognized as a fundamental model for the realization of and data exchange between digital twins in manufacturing. An AAS defines a hierarchical data structure to represent any type of asset throughout its entire lifecycle. In the context of AAS-based systems, comparing different AAS instances constitutes a practical challenge, as neither a widely accepted methodological framework nor a maturity model are available to systematically support such analyses. To address this gap, we propose a novel concept of AAS maturity that characterizes the extent to which established digital twin criteria are met and thus enabling comparability of AAS instances. The concepts are derived from the literature and applied through exemplification. These emerging results enable practitioners and researchers to systematically compare AAS instances and support the identification and assessment of further development steps in the digital twin engineering process.

Closest papers

Nearest neighbours by meaning across the whole index.

Involving before Evolving: A Vision for Trustworthy Enterprise Digital Twin Engineering

cs.SE cs.AIcs.HC ·2026-09-11 ·Kérian Fiter, Adil Lagrou, Franck Dervault, Bentley Oakes
top venue similarity 0.59
Abstract · Accepted for publication at MODELS Companion 2026 (Málaga, Spain). 5 pages (4 pages + 1 page references)

Enterprise Digital Twins (EDTs) promise data-driven decision support at organizational scale, but realizing them requires navigating siloed departments, tacit knowledge, and high-stakes decisions with long-horizon consequences. Existing approaches involve domain experts during model development but focus less on early organizational buy-in in EDTs. We present a vision for trustworthy EDT engineering grounded in an `involving before evolving' paradigm: rapidly involving stakeholders through a working prototype before evolving toward federation and full interoperability. Our three-stage approach combines foundation models for rapid prototyping, an ontological backbone for federated interoperability, and observability tooling for stakeholder trust. We ground our vision in an ongoing collaboration with Michelin, a multinational manufacturer, where an initial prototype has helped support stakeholder buy-in.

0.47

A Set-Theoretic Evaluation Framework for Assessing Asset Administration Shell Instances: Towards Comparability and Suitability

cs.SE eess.SY ·2026-09-15 ·Carsten Ellwein, David Dietrich, Rozana Cvitkovic, Bastian Lang, Jessica Roth +2 more
similarity 0.59
Abstract

Asset Administration Shells (AAS) provide a standardized means of representing assets and their information in manufacturing and increasingly serve as a basis for software services. However, different AAS instances vary in structure, content, and degree of completion, making it difficult to determine whether a given AAS is suitable for a specific application. This paper presents two complementary methods to support the comparison and application-oriented assessment of AAS. First, set-theoretic operations are employed to compare AAS models, enabling the identification of common, missing, and differing submodels and parameters. Second, an AAS suitability model assesses the conformity of an AAS to the requirements of a specific use case. The assessment considers structural conformity, semantic consistency, cardinality, and specification conformity and can be performed either against a reference AAS or a set of required SemanticIDs. A suitability value is derived from the identified deviations and is complemented by a detailed report of missing or non-conforming information. The proposed approach support practitioners and researchers in the comparison of evolving AAS and provide application-specific information on their suitability for manufacturing software services.

0.25

Semantic Interoperability in Federated Digital Twin Systems: A Systematic Review Through the Levels of Conceptual Interoperability Model

cs.SE cs.AIeess.SY ·2026-11-01 ·Manonmani Sekar, Nasim Nezamoddini
survey similarity 0.57
Abstract

When two companies connect their digital twins, software models of their plants kept up to date with live data, each twin must translate the other's data into its own terms, and that translation rule, called a mapping, can stop being correct when one company changes the meaning of its data without telling the other. This PRISMA 2020 systematic review screened 5,833 records and read 119 full texts to determine whether any published system detects such a broken mapping and repairs it while the twins operate. In all 32 included studies the mapping is fixed before operation, and the two ingredients of run-time repair appear only separately: cross-company matching without any check that the match still holds, and detection and repair of changed meaning within a single company. The review turns this gap into six requirements, each illustrated on one running example, that a system claiming run-time semantic interoperability between independently owned twins should meet.

0.24

Missing Dimensions: Integrating Human and Social Systems into Digital Twin Engineering

cs.SE ·2026-09-10 ·Francis Bordeleau, Mark van den Brand
similarity 0.57
Abstract

Digital twins (DTs) have emerged as a key technology at the core of digital transformation, yet their engineering practice remains too narrowly focused on engineered and natural systems. This paper argues that four system dimensions must be explicitly recognized in DT engineering: Engineered, Natural/Biological, Human, and Social. Each dimension brings distinct properties, modeling requirements, and ethical obligations that fundamentally shape what a DT must represent and how it must be built. We further argue that as DTs extend into the Human and Social dimensions, the emphasis should shift from automated control toward decision support and occupant empowerment. We illustrate our arguments using a smart building as a running example and identify four open research challenges for multi-dimensional DT engineering.

0.30

SEAL-DT: An End-to-End Security Engineering and Assurance Framework for Cross-Domain Digital Twins

cs.CR ·2026-10-12 ·Iraklis Varlamis, Stelios Zindros, Christos Sardianos, Thomas Lagkas, Panagiotis Sarigiannidis +1 more
similarity 0.57
Abstract

Cyber-physical systems connect physical processes, software, networks and organizations. Securing them requires a clear account of what happened, what was observed, which actions were authorized and what evidence supports each decision. Digital Twin (DT) descriptions often fail to explain how these elements stay consistent, blur the distinction between physical events and uncertain observations, or detach simulation results from their requirements and assumptions. This paper presents SEAL-DT (Security Engineering and Assurance Lifecycle for Digital Twins), a structured approach to building and evaluating secure DTs. It brings entity definitions, process models, deterministic simulations, data contracts, evidence records, automated tests and reproducible results into one connected model. The main contribution is an end-to-end DT security framework, spanning scenario definition, entity/process modelling, simulation, security decision logic, evidence handling, validation and reproducible reporting. Security decisions and simulation results thus trace back to their data, assumptions and requirements. A DT is more than a copy of system state: it states what it can observe, how accurate and current its information is, where it came from and which decisions it may support. We demonstrate SEAL-DT in five scenarios: Car2X protection, passive IoT-device detection, an industrial control surrogate, lawful acquisition in a smart home, and medical-IoT monitoring that preserves continuity of care. Each includes formal models, deterministic and negative experiments, uncertainty analyses, schema-valid fixtures, technical reports and verified manifests, testing multiple configurations under normal and adverse conditions. Results show that the framework supports consistent model construction, traceable execution and comparable internal validation, and that security findings link to observable evidence.

0.20

An Exemplar of a Digital Twin in Mechanical Engineering: Understanding Model Hybridization

cs.SE ·2026-09-15 ·Mahussi Datongnon, Hubert Lejeune, Yoann Jus, Benoit Combemale, Julien Deantoni
top venue similarity 0.55
Abstract

Digital Twins (DTs) are widely adopted across a variety of application domains. In industrial sectors, particularly in mechanical engineering, they accelerate product development, reduce risks, enable early issue prediction, and lower sustainment costs . In practice, DTs increasingly integrate physics-based (deductive) and data-driven (inductive) models into hybrid models combining the complementary strengths of both modeling paradigms. In this paper, we refer to this integration paradigm as hybridization. Despite this trend, the engineering of hybrid DTs that is, remains insufficiently documented. Hybridization is often introduced in an ad hoc manner, and its implementation is only partially made explicit, which limits reproducibility and transferability. This paper reports on the development of an existing fluidic loop digital twin at Centre Technique des Industries M{é}canique (CETIM). The DT is described using the characterization framework of Gil et al., providing a structured view across its lifecycle dimensions. To make hybridization explicit, the case is further analyzed through a complementary characterization structured along two dimensions: motivation and realization. The resulting description provides a traceable account of hybridization decisions and supports the documentation and transfer of hybrid DT engineering practices.

0.46

A Multi-Viewpoint Modeling Framework for Digital Twin Integration and Reuse with LLM-Assisted Compatibility Analysis

cs.SE ·2026-08-24 ·Nafiseh Soveizi, Milan Kopp, Parinaz Rashidi, Qing Shan, Geerten M. Hengeveld +2 more
similarity 0.53
Abstract · 45 page, 14 figs, 6 tables, 2 Appendix, Submitted to the International Journal on Software and Systems Modeling (SoSyM)

Digital Twin (DT) ecosystems integrate heterogeneous computational models to represent complex systems under evolving, purpose-specific objectives. Systematic reuse of existing high-quality models and datasets is essential for scalable DT development, yet is constrained by heterogeneity in semantic intent, data structures, behavioral interfaces, and execution environments. As a result, integration becomes a cross-model, cross-view consistency problem that is hard to predict, quantify, and compare across design choices. Existing standards and integration platforms address these concerns separately, offering limited support for structured, purpose-aware compatibility assessment and early feasibility analysis when models are reused under new DT objectives. This paper introduces a multi-viewpoint integration modeling framework grounded in the Reference Model of Open Distributed Processing (RM-ODP). The framework structures integration-relevant knowledge across domain, information, computational, engineering, and technology viewpoints, representing cross-view dependencies as explicit, machine-actionable metadata. It comprises (i) a viewpoint-structured Model Metamodel for systematic model description and discovery, and (ii) a pattern-aware Mismatch Detector that operationalizes cross-view compatibility constraints via integration patterns, combining deterministic rule generation with Large Language Model (LLM)-assisted reasoning. This enables systematic identification of semantic, informational, and runtime inconsistencies and supports reasoning about integration feasibility and effort before implementation. Expert validation and an environmental modeling case study show that the approach enables structured compatibility reasoning, improves transparency of integration assumptions, strengthens cross-view interoperability, and supports scalable reuse in heterogeneous DT ecosystems.

0.30

A Model-Centric DevOps Architecture for DEVS-Based Digital Twin Simulation Services

cs.SE cs.CEcs.DC ·2026-09-10 ·Arnis Lektauers, Gusts Linkevičs, Guntis Mosāns, Arina Fokina, Rasa Gulbe
similarity 0.52
Abstract · v2: revised version. Corrects the case study of v1 (bus route 22 only; the v1 scenario had also included the trolleybus route of the same nu…

Digital twin simulation models evolve and are redeployed like software. Engines based on the Discrete Event System Specification (DEVS) have a sound formal basis but offer little support for versioning, automated validation, or continuous delivery in cloud-native environments. This paper proposes a model-centric DevOps architecture that deploys DEVS-based digital twin simulations as managed services. Models are first-class DevOps artefacts written in a declarative language based on YAML (YAML Ain't Markup Language) with a tuple-level mapping to the multiPDEVS formalism. Repository continuous integration (CI) validates publishing manifests, the engine loader performs syntactic, structural, and static semantic checks before every simulation, and published model artefacts are versioned and immutable, so that an earlier validated version can be selected by pinning its identifier. The platform runs as containerised microservices on Kubernetes with engine adaptations that externalise inputs and results and expose lifecycle control. An initial case study on bus route 22 in Riga exercises the lifecycle on an offline model with roughly 115,000 DEVS atomic components and reports single-container throughput and concurrent job execution on one Kubernetes node. Behavioural validation and multi-node evaluation remain future work.

0.22