CS Paper Radar

A Time-Frequency Dual-Domain Multi-Scale Convolutional Neural Network for Bearing Fault Diagnosis under Strong Noise

Yanxi Ding, Tingyue Jia

cs.LG ·submitted 2026-08-10 06:38 UTC · v1

Abstract

To address the degradation of bearing fault diagnosis accuracy under strong noise, this paper proposes a time-frequency dual-domain multi-scale convolutional neural network. The time-domain branch employs three parallel convolutional kernels to capture multi-scale impulse features, while the frequency-domain branch applies the Fast Fourier Transform to extract noise-robust spectral structure information. Features from both branches are fused for fault classification, yielding a compact model of 110,122 parameters. Experiments on the CWRU bearing dataset across seven signal-to-noise ratio levels demonstrate that the proposed method achieves 99.75% accuracy under clean conditions and maintains 92.50% at -4 dB SNR, representing a 7.25 percentage-point improvement over the single-domain baseline with monotonically increasing gains under stronger noise. Ablation experiments validate the independent performance contributions of the time-domain multi-scale branch and the frequency-domain branch. Comparative experiments against WDCNN, DRSN-CW, MCNN, and 1D-LeNet confirm the superiority of the proposed method under strong noise conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Factorized axis convolutional gated recurrent unit with dynamic adaptive pooling for remaining useful life prediction of rolling bearings

cs.AI ·2026-09-25 ·Hanbyeol Park, Jungho Choo, Hyerim Bae
similarity 0.64
Abstract

Convolutional neural networks (CNN) are widely used to predict the remaining useful life (RUL) of rolling bearings from time-frequency representations (TFRs) of vibration signals. However, during degradation, characteristic structures in TFRs align predominantly along the frequency or time axis, making it challenging for conventional CNN isotropic kernels to capture directional structure. Furthermore, global average pooling (GAP) averages across axes, potentially obscuring the locations and concentrations of salient activations. This study introduces a factorized-axis convolutional gated recurrent unit (GRU) that employs multiscale anisotropic convolution and dual-axis convolution block attention module to enhance directional features and highlight salient time-frequency regions. Dynamic adaptive pooling (DAP) adaptively aggregates the time-frequency-axis information from the extracted feature maps, whereas a GRU captures temporal dynamics in the latent representations and Monte Carlo dropout enables predictive uncertainty estimation. Experiments on two public bearing datasets demonstrate that the proposed model outperforms existing RUL prediction methods across operating conditions. Ablation experiments demonstrate that the factorized axis-wise design achieves lower mean errors than convolutional isotropic kernels. DAP yields clear improvements on one dataset while matching GAP on the other, highlighting the importance of anisotropic feature extraction and adaptive feature aggregation for TFR-based RUL prediction.

0.21

Motor compound fault diagnosis using an attention-based cross-talk architecture

cs.AI cs.LG ·2026-10-19 ·Wonjun Yi, Wonho Jung, Junho Kim, Rismaya Kumar Mishra, Yong-Hwa Park
similarity 0.64
Abstract · Submitted to ICSV33

As physical AI increasingly relies on sensing to understand physical systems, reliable condition monitoring of industrial machinery has become more important. Motors are ubiquitous in industrial systems, and increasing system complexity raises the likelihood of simultaneous faults. Accordingly, compound fault diagnosis that identifies multiple fault components and their severities is increasingly required. Because different fault components jointly affect the same vibration signal, their severity classification can be formulated as related tasks, making multi-task learning (MTL) suitable for exploiting shared information. However, conventional shared-trunk architectures force tasks to share a common representation, potentially causing negative transfer because fault components are characterized by different time-frequency regions. To address this issue, this study proposes a Residual Neural Dimension Reductor with Time-Frequency Channel Attention (RNDR-TFCA), an attention-enhanced cross-talk architecture for multi-output compound fault diagnosis. RNDR-TFCA preserves task-specific feature extractors while selectively exchanging information across tasks. Time-frequency attention emphasizes informative intra-task regions, while channel attention enhances useful inter-task information after nonlinear feature fusion. Experiments on a rotor-bearing system with inner-race fault, outer-race fault, misalignment, and unbalance showed that RNDR-TFCA achieved a macro F1 score of 0.898, outperforming single-task, multi-class, shared-trunk, and cross-talk baselines. Ablation experiments confirmed the benefit of jointly applying both attention mechanisms. RNDR-TFCA required 713 K parameters and 170.42 MMACs, only slightly higher than RNDR. Channel-expanded baselines still underperformed RNDR-TFCA, indicating that the gain was not simply attributable to increased model capacity.

0.26

Deep Learning-Based Detection of Electrical Faults and Power Quality Disturbances in Aerospace Power Systems

eess.SP cs.LGeess.SY ·2026-09-09 ·Ian C. Guzmán, Radu Babiceanu, Berker Peköz
top venuecode/data similarity 0.62
Abstract · Accepted for publication in IEEE Transactions on Aerospace and Electronic Systems. Pending journal reference/external DOI

More Electric Aircraft require fast and reliable monitoring of high-frequency electrical networks, yet most power quality disturbance and fault diagnosis methods are developed for conventional 50 or 60 Hz grids. This work presents a hardware-aware deep learning framework for multiclass detection of electrical faults and power quality disturbances in a 400 Hz aerospace power system. A high-fidelity simulation model inspired by the Boeing 787 electrical architecture generates voltage and current waveforms for 21 normal, disturbance, switching, open-circuit, and short-circuit conditions. Two datasets, each containing 73,500 samples, are formed from one-dimensional time-series signals and short-time Fourier transform time-frequency representations. Signal-processing augmentation, domain randomization, and class-specific generative adversarial networks increase waveform diversity, and the time-series dataset is released through IEEE DataPort. We compare 1D and 2D convolutional neural networks, long short-term memory networks, CNN-LSTM hybrids, ResNet, MobileNet, and VGG models under common training conditions. A compact ResNet provides the best accuracy-complexity tradeoff, achieving 96.94 percent software test accuracy with 175,685 parameters. After 8-bit quantization and deployment on a Xilinx Zynq UltraScale Plus MPSoC ZCU102, the model achieves 95.87 percent accuracy and a measured mean neural-network accelerator latency of 6.90 ms per input record. The results establish simulation-based, accelerator-level feasibility for embedded edge AI in aircraft electrical health monitoring and motivate future end-to-end data acquisition and experimental validation.

0.52

One-Cycle Fault Classification and Faulted-Line Identification on the PROTECT-90 Dataset: An Initial Application Benchmark

eess.SY cs.LG ·2026-10-02 ·Emad Abukhousa, Abdulaziz Qwbaiban, Saman Zonouz, A. P. Sakis Meliopoulos
benchmarkcode/data similarity 0.61
Abstract

Open electromagnetic-transient datasets are beginning to make reproducible learning-based protection studies possible, but the practical use of these datasets still requires application-level benchmarks that define timing, sensing, and validation assumptions. This paper presents an initial application benchmark on the recently released PROTECT-90 dataset for two protection-oriented tasks: fault-type classification and discrete faulted-line identification. A compact one-dimensional convolutional neural network (CNN) is evaluated using post-inception windows of 0.25, 0.5, 1, and 2 cycles under strict episode-wise splitting. A non-convolutional multilayer perceptron (MLP) is also trained as an architecture-control baseline. The results show that both tasks are nearly saturated under full observability, with one-cycle test accuracies of 99.84% for fault type and 100.00% for line identification. The main performance variation appears under reduced observability: current-only inputs preserve line identification accuracy at 100.00%, whereas voltage-only inputs reduce line identification accuracy to 53.09% with the CNN and 50.57% with the MLP. This indicates that the limiting factor is measurement information rather than neural architecture. Additional stratified checks show stable performance across topology states and fault-resistance bins, while CPU inference contributes only 0.528 ms to the one-cycle total decision time of 20.53 ms.

0.29

A Time-Frequency-Condition Multimodal Fusion Foundation Model for Universal Rotating-Machinery Fault Diagnosis under Multi-Element Heterogeneous Scenarios

cs.CL cs.AI ·2026-11-11 ·Xinyu Zou, Jian Ma, Liang Ma, Chen Lu, Tao Peng +1 more
similarity 0.61
Abstract

Intelligent fault diagnosis models are typically developed for a single machine under a specific set of operating conditions, such that each new machine or condition requires retraining from scratch. This one-machine-one-model paradigm scales poorly. Although transfer learning and domain generalization can reduce the labeling burden, they primarily seek domain-invariant commonality, potentially discarding machine-specific characteristics that are critical for diagnosis. This paper proposes TFC-MMFD, a time-frequency-condition multimodal fusion foundation model for rotating-machinery fault diagnosis under multi-element heterogeneous scenarios. Statistical indicators, time-frequency images, vibration sequences, and textual machine and condition descriptions are tokenized into a unified language-like space, allowing inputs of different physical origin to be represented as a single sequence. A LLaMA backbone, together with cross-modal bidirectional attention and a Q-Former, then distills this sequence into fault-mode queries. Diagnosis is performed by matching these queries against natural-language fault-mode anchors rather than fixed class indices, while regression-adversarial condition disentanglement and condition-conditioned masked pre-training improve robustness to changing conditions. Across four progressive tasks on ten public bearing datasets spanning diverse bearing types, speeds, and loads, TFC-MMFD attains 99.40% accuracy and 99.16% macro-F1, maintains over 80% accuracy on most interpolated unseen conditions without adaptation, and improves from 20.26% to 95.63% accuracy on an unseen machine with only five labeled samples per class. It outperforms the strongest of eight domain-generalization baselines by 10.57 percentage points and compares favorably with a recent bearing foundation model while using less than half of its fine-tuning data.

0.15

A Hierarchical Method for Environmental Sounds Recognition in Complex Acoustic Scenes

cs.SD cs.LG ·2026-10-26 ·Zhouwen Li, Haijun Lin, Bowen Lv, Yupeng Chen
similarity 0.60
Abstract

Environmental noise identification is essential for noise control, yet conventional single-stage classifiers suffer from class confusion under imbalanced multiclass conditions. This paper proposes a lightweight hierarchical model integrating a Frequency-Time Adaptive Network (FTANet) with a two-stage classification mechanism. FTANet employs parallel asymmetric one-dimensional convolutions to capture temporal dynamics and frequency-band distributions, while adaptive fusion attention (AFA) enhances discriminative acoustic features. In the first stage, FTANet classifies sounds into five coarse-grained categories covering 25 fine-grained classes. In the second stage, samples are routed to the corresponding category-specific classifiers for fine-grained recognition. On a self-constructed dataset, FTANet achieves 95.45% coarse-grained accuracy with only 0.2004M parameters. On UrbanSound8K, it achieves 79.24% mean accuracy and 80.37% mean F1-score in ten-fold evaluation, outperforming compared convolutional models. Field tests on the Tianjin Online Acoustic Environment Monitoring Platform yield 87.94% coarse-grained accuracy and 97.21% conditional fine-grained accuracy for natural sounds correctly routed to C2. The complete hierarchical model achieves 87.18% overall accuracy and 87.40% weighted-average F1-score, demonstrating its feasibility for urban environmental noise monitoring.

0.29

When Does Domain Adaptation Help on Physical Vibration Sensors? A Held-Out-Bearing Study of Neural-Operator and Convolutional Models

cs.LG cs.AI ·2026-09-11 ·Kumbha Nagaswetha, Rabi Pathak
benchmark similarity 0.59
Abstract

Diagnosing rolling-element bearing faults from vibration is a canonical physical-sensing task and a widely used benchmark for domain adaptation under operating-condition shift. Accuracies above 99 percent are commonly reported, but under evaluation splits that place the same physical bearing in both training and test. We revisit the task under a held-out-bearing protocol, assigning every bearing unit entirely to either the training or the test set, and find that source-only transfer is far weaker than such numbers suggest: on a change of shaft speed it reaches only $0.36$, against a target-supervised ceiling of 0.97. We then study what governs transfer. Treating computed order tracking, a shaft-angle resampling that places fault frequencies at fixed shaft orders independent of running speed, as a controlled change of representation, we find that a Fourier Neural Operator raises source-only transfer from $0.36$ to $0.61$ on the speed shift, where the fault peaks move, while a convolutional network of matched feature dimension stays near chance in both representations. The representation also decides whether unsupervised alignment can work: with the same normalized RBF-MMD loss and no target labels, the operator reaches 0.71 in the frequency domain but 0.95 in the order domain, within 0.02 of the target-supervised ceiling and above $0.86$ on every held-out bearing fold. Once the representation is right, a small label budget adds little. These results indicate that, for this task, the input representation rather than the alignment method decides whether adaptation helps. A second dataset, whose held-out units are fault diameters rather than bearings, shows that the same protocol exposes failures that even a target-supervised model cannot avoid.

0.27

When Labels Are Scarce: An Oscillatory State Space Model for Vibration Diagnosis

cs.LG eess.SP ·2026-09-23 ·Mainak Mallick, Seung-Kyum Choi
benchmark similarity 0.59
Abstract

Machine fault diagnosis from vibration requires learning from scarce labelled fault recordings while meeting the computational constraints of edge devices for local inference. We introduce DualRes, a compact oscillatory state-space model that combines two complementary spectral views of vibration, capturing rapid changes and fine frequency structure. Time-aligned views are processed by selective oscillatory memory, which learns how long to retain temporal patterns. The encoder contains 39,528 parameters. We evaluate supervised learning across six bearing datasets and a gearbox benchmark, with an additional gearbox pilot. Recording-level splits and explicit accounting of labelled duration distinguish data efficiency from repeated exposure to correlated samples. On the main gearbox benchmark, DualRes achieves state-of-the-art performance among the nine evaluated methods at six of seven label budgets. With about six labelled seconds per class, it improves macro-F1 by 16.1 percentage points over the next strongest comparator. On the same benchmark, DualRes achieves a 1.44-fold recording-level speedup and a 24.8-fold reduction in checkpoint storage relative to a selective state-space baseline under matched hardware and runtime conditions. Bearing results reveal task-dependent trade-offs. These findings support oscillatory memory as a compact approach to vibration diagnosis under limited labelled exposure.

0.30