CS Paper Radar

When Does Domain Adaptation Help on Physical Vibration Sensors? A Held-Out-Bearing Study of Neural-Operator and Convolutional Models

Kumbha Nagaswetha, Rabi Pathak

cs.LG cs.AI ·submitted 2026-09-11 05:44 UTC · v1
benchmark

Abstract

Diagnosing rolling-element bearing faults from vibration is a canonical physical-sensing task and a widely used benchmark for domain adaptation under operating-condition shift. Accuracies above 99 percent are commonly reported, but under evaluation splits that place the same physical bearing in both training and test. We revisit the task under a held-out-bearing protocol, assigning every bearing unit entirely to either the training or the test set, and find that source-only transfer is far weaker than such numbers suggest: on a change of shaft speed it reaches only $0.36$, against a target-supervised ceiling of 0.97. We then study what governs transfer. Treating computed order tracking, a shaft-angle resampling that places fault frequencies at fixed shaft orders independent of running speed, as a controlled change of representation, we find that a Fourier Neural Operator raises source-only transfer from $0.36$ to $0.61$ on the speed shift, where the fault peaks move, while a convolutional network of matched feature dimension stays near chance in both representations. The representation also decides whether unsupervised alignment can work: with the same normalized RBF-MMD loss and no target labels, the operator reaches 0.71 in the frequency domain but 0.95 in the order domain, within 0.02 of the target-supervised ceiling and above $0.86$ on every held-out bearing fold. Once the representation is right, a small label budget adds little. These results indicate that, for this task, the input representation rather than the alignment method decides whether adaptation helps. A second dataset, whose held-out units are fault diameters rather than bearings, shows that the same protocol exposes failures that even a target-supervised model cannot avoid.

Closest papers

Nearest neighbours by meaning across the whole index.

When Labels Are Scarce: An Oscillatory State Space Model for Vibration Diagnosis

cs.LG eess.SP ·2026-09-23 ·Mainak Mallick, Seung-Kyum Choi
benchmark similarity 0.62
Abstract

Machine fault diagnosis from vibration requires learning from scarce labelled fault recordings while meeting the computational constraints of edge devices for local inference. We introduce DualRes, a compact oscillatory state-space model that combines two complementary spectral views of vibration, capturing rapid changes and fine frequency structure. Time-aligned views are processed by selective oscillatory memory, which learns how long to retain temporal patterns. The encoder contains 39,528 parameters. We evaluate supervised learning across six bearing datasets and a gearbox benchmark, with an additional gearbox pilot. Recording-level splits and explicit accounting of labelled duration distinguish data efficiency from repeated exposure to correlated samples. On the main gearbox benchmark, DualRes achieves state-of-the-art performance among the nine evaluated methods at six of seven label budgets. With about six labelled seconds per class, it improves macro-F1 by 16.1 percentage points over the next strongest comparator. On the same benchmark, DualRes achieves a 1.44-fold recording-level speedup and a 24.8-fold reduction in checkpoint storage relative to a selective state-space baseline under matched hardware and runtime conditions. Bearing results reveal task-dependent trade-offs. These findings support oscillatory memory as a compact approach to vibration diagnosis under limited labelled exposure.

0.30

A Time-Frequency Dual-Domain Multi-Scale Convolutional Neural Network for Bearing Fault Diagnosis under Strong Noise

cs.LG ·2026-08-10 ·Yanxi Ding, Tingyue Jia
similarity 0.59
Abstract

To address the degradation of bearing fault diagnosis accuracy under strong noise, this paper proposes a time-frequency dual-domain multi-scale convolutional neural network. The time-domain branch employs three parallel convolutional kernels to capture multi-scale impulse features, while the frequency-domain branch applies the Fast Fourier Transform to extract noise-robust spectral structure information. Features from both branches are fused for fault classification, yielding a compact model of 110,122 parameters. Experiments on the CWRU bearing dataset across seven signal-to-noise ratio levels demonstrate that the proposed method achieves 99.75% accuracy under clean conditions and maintains 92.50% at -4 dB SNR, representing a 7.25 percentage-point improvement over the single-domain baseline with monotonically increasing gains under stronger noise. Ablation experiments validate the independent performance contributions of the time-domain multi-scale branch and the frequency-domain branch. Comparative experiments against WDCNN, DRSN-CW, MCNN, and 1D-LeNet confirm the superiority of the proposed method under strong noise conditions.

0.04

Factorized axis convolutional gated recurrent unit with dynamic adaptive pooling for remaining useful life prediction of rolling bearings

cs.AI ·2026-09-25 ·Hanbyeol Park, Jungho Choo, Hyerim Bae
similarity 0.58
Abstract

Convolutional neural networks (CNN) are widely used to predict the remaining useful life (RUL) of rolling bearings from time-frequency representations (TFRs) of vibration signals. However, during degradation, characteristic structures in TFRs align predominantly along the frequency or time axis, making it challenging for conventional CNN isotropic kernels to capture directional structure. Furthermore, global average pooling (GAP) averages across axes, potentially obscuring the locations and concentrations of salient activations. This study introduces a factorized-axis convolutional gated recurrent unit (GRU) that employs multiscale anisotropic convolution and dual-axis convolution block attention module to enhance directional features and highlight salient time-frequency regions. Dynamic adaptive pooling (DAP) adaptively aggregates the time-frequency-axis information from the extracted feature maps, whereas a GRU captures temporal dynamics in the latent representations and Monte Carlo dropout enables predictive uncertainty estimation. Experiments on two public bearing datasets demonstrate that the proposed model outperforms existing RUL prediction methods across operating conditions. Ablation experiments demonstrate that the factorized axis-wise design achieves lower mean errors than convolutional isotropic kernels. DAP yields clear improvements on one dataset while matching GAP on the other, highlighting the importance of anisotropic feature extraction and adaptive feature aggregation for TFR-based RUL prediction.

0.21

Safe Domain Adaptation for Physics: Overcoming Nuisances, Label Shifts, and Simulation Priors

cs.LG astro-ph.IMphysics.data-an ·2026-08-18 ·Ivan Kharuk
benchmark similarity 0.57
Abstract

Domain adaptation is widely used to make neural networks trained on simulations applicable to experimental data. Its premise is that the two domains differ only in nuisances, and that the quantity of interest is distributed identically in both. In physics neither assumption holds: simulations can be wrong about the physics, and the distribution of the target quantity - an energy spectrum, a redshift distribution - is often the measurement itself. We study the consequences of such mismatches on a toy air-shower benchmark in which a detector-response nuisance, a physical simulation shift, and an energy-spectrum shift can be switched on separately or together. Standard adversarial adaptation handles the conditional shifts, but once the two spectra differ it aligns them, replacing an uncontrolled bias by one anchored on the simulation prior. We present adaptive domain adaptation, which reweights the simulated events so as to focus domain adaptation on the genuine physical mismatch alone. Since the predicted spectrum depends on model training configuration, we provide a label-free model selection rule for selecting the near-the-best operation point.

0.18

Lightweight Time-Frequency Vibration Sensing for Consumer Device Condition Monitoring

eess.SP cs.LG ·2026-10-09 ·Po-Heng Chou, Jen-Yu Chiu, Chun-Yu Yeh, Wei-Lung Mao, Walid Saad
benchmark similarity 0.55
Abstract · 6 pages, 3 figures, and 4 tables. Submitted to the 2027 IEEE International Conference on Consumer Electronics (ICCE 2027)

Consumer rotating devices, including washing machines, air conditioners, electric fans, robotic vacuum cleaners, and home fitness equipment, increasingly rely on vibration sensing for intelligent condition monitoring and predictive maintenance. Ensuring reliable operation in these resource-constrained appliances requires efficient, lightweight artificial intelligence (AI) solutions capable of processing non-stationary signals under real-world operational interference. This paper proposes a lightweight AI-assisted vibration sensing framework that employs continuous wavelet transform (CWT) and Hilbert-Huang transform (HHT) to convert one-dimensional (1-D) vibration time-series signals into two-dimensional (2-D) time-frequency representations. These representations are subsequently analyzed using lightweight deep learning architectures, specifically MobileNetV3-Small, ConvNeXt-Tiny, and the You Only Look Once version 11 classification model (YOLOv11-cls). Public bearing benchmark datasets, including Case Western Reserve University (CWRU), Paderborn University (PU), and Intelligent Maintenance Systems (IMS), are utilized as representative rotating components to investigate model generalization. The proposed framework is designed with eventual embedded deployment in consumer electronics in mind. Experimental results demonstrate that CWT combined with YOLOv11-cls achieves high diagnostic accuracy, while MobileNetV3-Small provides an attractive low-latency alternative for computationally constrained edge platforms. Conventional random splitting is also compared with dataset-specific structured isolation. The results highlight the importance of avoiding data leakage and quantify tradeoffs in classification accuracy, parameter count, floating-point operations (FLOPs), model footprint, preprocessing cost, and central processing unit (CPU) inference latency.

0.23

Motor compound fault diagnosis using an attention-based cross-talk architecture

cs.AI cs.LG ·2026-10-19 ·Wonjun Yi, Wonho Jung, Junho Kim, Rismaya Kumar Mishra, Yong-Hwa Park
similarity 0.55
Abstract · Submitted to ICSV33

As physical AI increasingly relies on sensing to understand physical systems, reliable condition monitoring of industrial machinery has become more important. Motors are ubiquitous in industrial systems, and increasing system complexity raises the likelihood of simultaneous faults. Accordingly, compound fault diagnosis that identifies multiple fault components and their severities is increasingly required. Because different fault components jointly affect the same vibration signal, their severity classification can be formulated as related tasks, making multi-task learning (MTL) suitable for exploiting shared information. However, conventional shared-trunk architectures force tasks to share a common representation, potentially causing negative transfer because fault components are characterized by different time-frequency regions. To address this issue, this study proposes a Residual Neural Dimension Reductor with Time-Frequency Channel Attention (RNDR-TFCA), an attention-enhanced cross-talk architecture for multi-output compound fault diagnosis. RNDR-TFCA preserves task-specific feature extractors while selectively exchanging information across tasks. Time-frequency attention emphasizes informative intra-task regions, while channel attention enhances useful inter-task information after nonlinear feature fusion. Experiments on a rotor-bearing system with inner-race fault, outer-race fault, misalignment, and unbalance showed that RNDR-TFCA achieved a macro F1 score of 0.898, outperforming single-task, multi-class, shared-trunk, and cross-talk baselines. Ablation experiments confirmed the benefit of jointly applying both attention mechanisms. RNDR-TFCA required 713 K parameters and 170.42 MMACs, only slightly higher than RNDR. Channel-expanded baselines still underperformed RNDR-TFCA, indicating that the gain was not simply attributable to increased model capacity.

0.26

A Time-Frequency-Condition Multimodal Fusion Foundation Model for Universal Rotating-Machinery Fault Diagnosis under Multi-Element Heterogeneous Scenarios

cs.CL cs.AI ·2026-11-11 ·Xinyu Zou, Jian Ma, Liang Ma, Chen Lu, Tao Peng +1 more
similarity 0.55
Abstract

Intelligent fault diagnosis models are typically developed for a single machine under a specific set of operating conditions, such that each new machine or condition requires retraining from scratch. This one-machine-one-model paradigm scales poorly. Although transfer learning and domain generalization can reduce the labeling burden, they primarily seek domain-invariant commonality, potentially discarding machine-specific characteristics that are critical for diagnosis. This paper proposes TFC-MMFD, a time-frequency-condition multimodal fusion foundation model for rotating-machinery fault diagnosis under multi-element heterogeneous scenarios. Statistical indicators, time-frequency images, vibration sequences, and textual machine and condition descriptions are tokenized into a unified language-like space, allowing inputs of different physical origin to be represented as a single sequence. A LLaMA backbone, together with cross-modal bidirectional attention and a Q-Former, then distills this sequence into fault-mode queries. Diagnosis is performed by matching these queries against natural-language fault-mode anchors rather than fixed class indices, while regression-adversarial condition disentanglement and condition-conditioned masked pre-training improve robustness to changing conditions. Across four progressive tasks on ten public bearing datasets spanning diverse bearing types, speeds, and loads, TFC-MMFD attains 99.40% accuracy and 99.16% macro-F1, maintains over 80% accuracy on most interpolated unseen conditions without adaptation, and improves from 20.26% to 95.63% accuracy on an unseen machine with only five labeled samples per class. It outperforms the strongest of eight domain-generalization baselines by 10.57 percentage points and compares favorably with a recent bearing foundation model while using less than half of its fine-tuning data.

0.15

Fault Diagnosis of Dynamic Systems Under Unknown Operating Conditions: A Condition-Guided Selective Adaptation Approach

eess.SY ·2026-08-21 ·Jiaming Liu, Zeyi Liu, Hongshuo Zhao, Pengyu Han, Xiao He
similarity 0.54
Abstract

Fault diagnosis under unknown operating conditions remains challenging for dynamic industrial systems, as the distribution shift caused by changing operating conditions can significantly degrade the performance of diagnostic models in real-world applications. To address the problem, a condition-guided selective adaptation approach is proposed. Specifically, a novel continuous operating-condition adversarial learning strategy with progressive training is developed in the offline stage to enhance the generalization ability of the diagnostic model. During online deployment, residual operating-condition responses are exploited to identify reliable unlabeled samples from streaming data, which are then used to update the diagnostic model. Extensive experiments on real-world gearbox and motor datasets have demonstrated that the proposed framework outperforms state-of-the-art methods in diagnostic accuracy while maintaining relatively low test-time, showing its potential for practical industrial applications.

0.17