CS Paper Radar

ASPIRE-VINS: Adaptive Spline-based Visual-inertial Navigation System With Robust 3D Measurement Residuals

Kwangyik Jung, Eungchang Mason Lee, Taekjun Oh, Hyun Myung

cs.RO ·submitted 2026-08-13 05:24 UTC · v1
top venue

Abstract

Visual-inertial navigation systems estimate six-degree-of-freedom motion by fusing visual and inertial data. Modern discrete-time methods with IMU preintegration provide strong accuracy and efficiency, but keyframe-based representations can be less flexible when residuals must be evaluated at arbitrary timestamps or when motion-dependent temporal resolution is needed. Continuous-time splines address this issue by representing the trajectory as a smooth temporal function, but uniformly spaced knots can under-represent rapid dynamics or over-parameterize static intervals. This letter proposes ASPIRE-VINS, a continuous-time VINS framework that combines adaptive knot placement (AKP), multi-resolution splines (MRS), and 3D measurement-space residuals (3D-MSR). AKP allocates knots according to local motion variation, MRS adds bounded local refinement in tangent space, and 3D-MSR provides bearing consistency by aligning transformed features with calibrated observation rays in 3D measurement space. Experiments show that ASPIRE-VINS achieves competitive or lower trajectory errors than the compared baselines, demonstrating the effectiveness of motion-adaptive continuous-time trajectory modeling under diverse motion and sensing conditions.

Comment
8 pages, 5 figures. Accepted for publication in IEEE Robotics and Automation Letters (RA-L), June 2026
Journal ref
IEEE Robotics and Automation Letters, vol. 11, no. 9, pp. 10625-10632, 2026
DOI
10.1109/LRA.2026.3711842

Closest papers

Nearest neighbours by meaning across the whole index.

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

cs.RO ·2026-10-27 ·Ziyu Cao, William Talbot, Song Li, Pakpong Chirarattananon, Fredrik Gustafsson +2 more
code/data similarity 0.71
Abstract · 18 pages

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

0.40

GaussianSpline: Adaptive Bézier Splines for Highly Dynamic 4D Gaussian Splatting

cs.GR cs.CV ·2026-10-26 ·Tom Yachil, Andrei Sharf
benchmark similarity 0.60
Abstract · 8 pages, 4 figures

We present GaussianSpline, a dynamic 4D Gaussian Splatting method that models per-Gaussian motion using adaptive, non-uniform piecewise cubic Bézier splines. Unlike approaches based on global deformations, fixed-order polynomials, or uniformly parameterized splines, GaussianSpline jointly learns the Bézier control points and the temporal partition of each Gaussian's trajectory. This adaptive representation allocates greater temporal capacity to highly dynamic regions while maintaining compact trajectories for near-static regions, enabling high-fidelity reconstruction of complex and rapidly changing motion. To jointly achieve globally smooth motion and local adaptivity, we enforce $G^1$ continuity between consecutive Bézier segments using a reflection-based constraint on their control points. This produces smooth, fully differentiable trajectories while preserving the flexibility of non-uniform temporal parameterization. Experiments on the Neural 3D Video benchmark, the Google Immersive dataset, as well as on synthetic scenes demonstrate that GaussianSpline substantially improves reconstruction quality in scenes with highly non-uniform and challenging dynamics, while maintaining competitive performance on general dynamic scenes compared with state-of-the-art 4D Gaussian Splatting methods.

0.28

Robust Structureless Monocular Visual Inertial Initialization Exploiting Line Features and Vanishing Points

cs.RO cs.CV ·2026-09-18 ·Junwan Choi, Woongrae Jo, Dong-Uk Seo, Jinwoo Jeon, Hyun Myung
publishedbenchmarkcode/data similarity 0.58
Abstract · 8 pages, 5 figures, Accepted to IROS 2026

Accurate initialization is essential for reliable visual-inertial odometry (VIO), but it is often ill-conditioned under degenerate motions. Existing methods typically require restrictive excitation motions to ensure sufficient observability or rely on computationally expensive 3D structure reconstruction, limiting efficient and practical deployment. To address these limitations, we propose SLIM-init, a structureless monocular VIO initializer that directly exploits geometric constraints from tracked 2D line features without explicit 3D landmark reconstruction. Specifically, SLIM-init leverages line-derived vanishing points (VPs) as translation-invariant orientation cues to provide robust rotation-only constraints under degenerate scenarios such as low-parallax or translation-dominant motions. It further incorporates a line epipolar residual to constrain translation and a line-normal projection residual to improve the conditioning of linear alignment, enhancing the accuracy and robustness of initial state estimation. Extensive experiments on a public benchmark and challenging custom degenerate-motion sequences demonstrate improved accuracy and robustness over state-of-the-art initialization methods. The source code is available at: https://github.com/cjunwan/SLIM-init.

0.44

A Neural Network Approach towards Real-Time Knot Point Density Estimates for the Nonlinear Quadrotor

eess.SY cs.LG ·2026-10-30 ·Jasmine Ratchford, Raffaele Romagnoli, Mark H. Klein
similarity 0.58
Abstract · 8 pages, 5 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after wh…

Spline representations provide a compact way to approximate continuous trajectories using a finite number of parameters. When approximating trajectories generated by dynamical systems, the efficiency of a spline representation depends strongly on the placement of knot points. Uniform knot distributions often lead to inefficient representations, requiring either unnecessary control points or producing poor approximations in regions where the trajectory varies rapidly. In this work we propose a learning-based method for adaptive knot placement in B-spline approximations of trajectories generated by ordinary differential equations. A neural network learns a mapping from the initial condition of the system to quantities that characterize the local variation of the resulting trajectory. These estimates are used to construct nonuniform knot distributions that approximately equidistribute a local error indicator, reducing the number of control points needed to meet a prescribed accuracy.

0.59

Cubic Spline Interpolation for Smooth Trajectory Generation in Autonomous Motion Systems

cs.RO ·2026-10-09 ·Aarush Mandayam, Sriram Aditya Gundla, Elliott Tammaro
similarity 0.57
Abstract

We presented a program that automates the construction and solution of the cubic spline interpolation problem for a sequence of position-time waypoints, producing trajectories that are continuous in position, velocity, and acceleration and therefore avoid the infinite-acceleration problem inherent to piecewise-linear waypoint following. By assembling the interpolation and continuity conditions into a single linear system and solving directly for the spline coefficients, the program removes the need to manually derive per-segment equations for each new waypoint set. We illustrated the approach on free-form curve drawing and signature digitization, two tasks that use the same underlying machinery required for smooth robot and drone trajectory generation. Future work includes extending the implementation to multi-axis trajectories with explicit velocity and acceleration bounds, adopting the more computationally efficient tridiagonal solution method for larger waypoint sets, and evaluating the approach quantitatively against alternative trajectory generation methods.

0.24

Large-area Spatially Aligned Anchors

cs.MM cs.CV ·2026-10-22 ·Joni Vanherck, Brent Zoomers, Lode Jorissen, Isjtar Vandebroeck, Eric Joris +1 more
published similarity 0.55
Abstract · Accepted at XR Salento 2024

Extended Reality (XR) technologies, including Virtual Reality (VR) and Augmented Reality (AR), offer immersive experiences merging digital content with the real world. Achieving precise spatial tracking over large areas is a critical challenge in XR development. This paper addresses the drift issue, caused by small errors accumulating over time leading to a discrepancy between the real and virtual worlds. Tackling this issue is crucial for co-located XR experiences where virtual and physical elements interact seamlessly. Building upon the locally accurate spatial anchors, we propose a solution that extends this accuracy to larger areas by exploiting an external, drift-corrected tracking method as a ground truth. During the preparation stage, anchors are placed inside the headset and inside the external tracking method simultaneously, yielding 3D-3D correspondences. Both anchor clouds, and thus tracking methods, are aligned using a suitable cloud registration method during the operational stage. Our method enhances user comfort and mobility by leveraging the headset's built-in tracking capabilities during the operational stage, allowing standalone functionality. Additionally, this method can be used with any XR headset that supports spatial anchors and with any drift-free external tracking method. Empirical evaluation demonstrates the system's effectiveness in aligning virtual content with the real world and expanding the accurate tracking area. In addition, the alignment is evaluated by comparing the camera poses of both tracking methods. This approach may benefit a wide range of industries and applications, including manufacturing and construction, education, and entertainment.

0.41

When Do Learned Priors Help Visual Inertial Estimation? A Controlled Study of Prior Integration, Calibration, Initialization, and Backend Consistency

cs.RO cs.CV ·2026-09-12 ·Jinchang Zhang, Guoyu Lu
similarity 0.55
Abstract

Learned components are increasingly integrated into geometric visual--inertial estimators to provide motion, depth, bias, uncertainty, or confidence cues. Yet it remains unclear whether gains arise from useful learned priors or from changes in the backend, calibration, initialization, temporal association, or evaluation gauge. We present a controlled framework for learning-augmented visual--inertial estimation that separates fusion gain from the incremental value of a learned prior and evaluates four evidence layers: local motion consistency, global trajectory accuracy, physical-state correctness, and numerical consistency. We instantiate the framework with a MonoViT-based monocular motion prior added as a local relative-motion factor to an unchanged VINS backend. We compare Original VINS and learned-prior VINS under matched sensor streams, timestamps, initialization, frontend/backend settings, and camera--IMU extrinsics, while probing calibration, initialization, state coupling, scale, bundle adjustment, and loop closure. On KITTI, with fixed reference extrinsics, translation APE RMSE is 31.4 m for Original VINS and 31.8 m with the learned prior. Across four recordings, the prior changes mean APE by only -0.2%, while a five-times-higher weight worsens it by 8.2%. Online extrinsic updates increase mean APE by 45.7% and 52.1%, respectively, while mean RPE changes by less than 2%. These results show that fusion performance alone cannot establish the value of learned priors. Reliable evaluation requires same-backend controls and joint analysis of prior compatibility, calibration, initialization, global drift, physical-state error, and backend consistency.

0.20

Line-Augmented cuVSLAM: Robust Visual Odometry in Low-Texture Environments

cs.RO cs.CV ·2026-10-14 ·Dara Molloy, Terry Wu, Wonju Lee, Abhilash Nand Kumar, David Adley +2 more
similarity 0.55
Abstract · 8 pages, 4 figures

Autonomous mobile robots in warehouses and production facilities operate in precisely the environments that defeat point-feature visual odometry: featureless aisles, uniform walls, repetitive racking and specular floors. Such environments are, however, rich in straight-edge structure: rack uprights, door frames, wall junctions and cabinet outlines present high-contrast linear edges stable across wide viewpoint changes. A line-feature extension to cuVSLAM, a CUDA-accelerated visual-SLAM system, is presented that recovers this signal. Lines are parameterised as Plücker coordinates for geometric transport and as the minimal 4-DOF orthonormal representation of Bartoli and Sturm for optimisation; a Cauchy-robust point-to-line residual with analytic Jacobians is folded directly into cuVSLAM's per-frame Gauss-Newton pose solve, and the same line state is jointly refined in the Schur-complement sliding-window bundle adjustment. An adaptive information weight causes lines to assume more of the estimation burden exactly as point features become scarce, and the extension adds residual blocks to existing solvers rather than introducing a second estimator, reducing exactly to the unmodified point pipeline when disabled. Evaluated in RGB-D mode under SE(3) Umeyama alignment with no scale correction, line features reduce mean absolute trajectory error by 38.5% over the 22 sequences of the TUM RGB-D Freiburg3 collection and by 30.1% over the 8 Replica room and office sequences, where median translation error falls by 38.9% and median rotation error by 66.4%, with zero tracking failures in any configuration tested.

0.28