CS Paper Radar

Line-Augmented cuVSLAM: Robust Visual Odometry in Low-Texture Environments

Dara Molloy, Terry Wu, Wonju Lee, Abhilash Nand Kumar, David Adley, Conor Ferguson, Hesam Rabeti

cs.RO cs.CV ·submitted 2026-10-14 21:29 UTC · v1

Abstract

Autonomous mobile robots in warehouses and production facilities operate in precisely the environments that defeat point-feature visual odometry: featureless aisles, uniform walls, repetitive racking and specular floors. Such environments are, however, rich in straight-edge structure: rack uprights, door frames, wall junctions and cabinet outlines present high-contrast linear edges stable across wide viewpoint changes. A line-feature extension to cuVSLAM, a CUDA-accelerated visual-SLAM system, is presented that recovers this signal. Lines are parameterised as Plücker coordinates for geometric transport and as the minimal 4-DOF orthonormal representation of Bartoli and Sturm for optimisation; a Cauchy-robust point-to-line residual with analytic Jacobians is folded directly into cuVSLAM's per-frame Gauss-Newton pose solve, and the same line state is jointly refined in the Schur-complement sliding-window bundle adjustment. An adaptive information weight causes lines to assume more of the estimation burden exactly as point features become scarce, and the extension adds residual blocks to existing solvers rather than introducing a second estimator, reducing exactly to the unmodified point pipeline when disabled. Evaluated in RGB-D mode under SE(3) Umeyama alignment with no scale correction, line features reduce mean absolute trajectory error by 38.5% over the 22 sequences of the TUM RGB-D Freiburg3 collection and by 30.1% over the 8 Replica room and office sequences, where median translation error falls by 38.9% and median rotation error by 66.4%, with zero tracking failures in any configuration tested.

Comment
8 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

sqrtVINS-Based 360 Visual-Inertial SLAM Systems: Hilti-Trimble SLAM Challenge 2026 Entry

cs.RO ·2026-11-16 ·Jungwoo Lee, Hogyun Kim, Jiwon Choi, Jinyong Jeong, Younggun Cho
published similarity 0.64
Abstract · 2026 Hilti x Trimble SLAM Challenge at ICRA 2026 (2nd Place in the SLAM Category)

This report describes our submission to the 2026 Hilti-Trimble SLAM Challenge. The system is a 360-camera visual-inertial pipeline that uses only the provided dual-fisheye image streams and IMU measurements. First, raw images are preprocessed with low-light enhancement and static/dynamic masking, and then fed into a $\sqrt{\text{VINS}}$ frontend as the local odometry, with deep learning-based SuperPoint features, ELSED line segments, and LightGlue matching. The resulting trajectory is refined using a GTSAM-based backend that performs tightly-coupled factor graph optimization with SALAD global descriptor and visual bundle adjustment (BA). The backend performs local-to-global structureless BA, tightly regularized intrinsic and extrinsic refinement, and global scale adjustment supported by the known inter-camera baseline and cross-view constraints. The design targets long indoor sequences with dark regions, repetitive corridors, dynamic objects, and limited geometric parallax, while keeping the pipeline reproducible in the provided ROS2 workspace. Fig. 1 demonstrates that our proposed method aligns well with the floorplan across several indoor sequences.

0.34

Visual-Inertial RGB-D SLAM with Encoders for a Differential Wheeled Robot

cs.RO ·2026-10-30 ·Zhanghao Zhu, Yutaka Kaizu, Kenichi Furuhashi, Kenji Imou
publishedcode/datahighly cited similarity 0.63
Abstract · 11 pages. Author-accepted manuscript of the article published in IEEE Sensors Journal, 2022

Recent years have seen multiple impressive results in visual-inertial odometry (VIO) techniques, by which accurate state estimation can be achieved via the extended Kalman filter (EKF) or nonlinear optimization. However, these approaches are rarely open source, and they tend to fail in real experiments due to the temporary lack of feature points and fast motion. Therefore, in this study, we used encoders to overcome the temporary failure of purely vision-based simultaneous localization and mapping (SLAM). Here, we propose a generative measurement model for encoders and derive an expression for the maximum a posteriori (MAP) estimate and necessary Jacobians for optimization. We use our theory to present a novel tightly coupled visual-inertial encoder RGB-Depth (RGB-D) SLAM system. Tests on our system on an in-house dataset confirmed that our modeling effort led to accurate (with a root mean squared error (RMSE) of approximately 2-7 cm) and robust state estimation in real time. The source code and our dataset containing the encoder information have been published for verification.

0.74

GOFusion: Real-Time Gaussian-Occupancy Submap Fusion for Fisher-Informed Autonomous Robot Navigation

cs.RO ·2026-10-18 ·Boxin Bu, Simon Boche, Haoming Zhang, Jaehyung Jung, Jiaxin Wei +4 more
code/data similarity 0.63
Abstract · 8 pages, 7 figures, 4 tables. Paper under review

In this letter, we present GOFusion, a real-time visual mapping system for autonomous robot navigation that anchors Gaussian primitives to local occupancy maps, providing both spatial awareness for path planning and high-fidelity appearance that enables information-driven robot navigation. GOFusion builds 3D Gaussian maps from pose estimates and local occupancy maps obtained via visual-inertial SLAM and enables pose corrections to maintain both geometric and visual consistency. Furthermore, it restricts the 3D Gaussian Splatting optimization to active submaps to bound GPU memory usage. Building on the appearance-rich Gaussian map, we introduce a rasterizer-integrated Fisher approximation that quantifies per-primitive sensitivity online, serving as an information-driven heuristic for Gaussian pruning and next-best-view planning. We evaluate GOFusion on public datasets and in real-world drone flights. It not only outperforms several baselines in mapping quality, but also achieves real-time, high-fidelity and uncertainty-aware mapping at scale. Finally, we demonstrate fully autonomous drone exploration for Gaussian map refinement using the proposed Fisher-informed heuristic. Code is available at https://github.com/Bennnoo/GOFusion. We provide a supplementary video demonstration at https://youtu.be/pLQKbxQvb6I.

0.32

From LiDAR Maps to Visual Localization: Unified Visual Association for Robust Point-Line-Plane Pose Estimation

cs.RO ·2026-09-23 ·Wentao Zhao, Zikun Chen, Yihe Niu, Haoyu Chen, Jingchuan Wang
benchmark similarity 0.62
Abstract

Camera localization in a prior LiDAR map provides a persistent geometric reference for long-term robotic navigation, yet remains challenging because of the substantial modality gap between camera images and point-cloud maps. We present a unified localization framework that makes the LiDAR map visually addressable rather than relying on a dedicated image-LiDAR correspondence model. Map geometry and reflectivity are rendered into LiDAR-derived quasi-images with explicit 2D-3D provenance, enabling camera observations and rendered map views to share mature visual features and matchers for both global localization and continuous pose tracking. Point and line correspondences are established through this common visual interface, while the retained provenance recovers metric LiDAR geometry and line-supported planar constraints for pose estimation. To improve robustness under ambiguous associations and weak geometry, we further introduce a distribution-aware, observability-complementary optimization strategy. Instead of reducing matching ambiguity to a scalar confidence, candidate association distributions are propagated into directional pose-information uncertainty, and reliable structural factors are selectively reinforced according to their ability to complement the currently weak pose directions. Experiments on the EuRoC MAV benchmark and self-collected real-world sequences demonstrate accurate global localization and robust continuous 6-DoF tracking using only a pre-built LiDAR map as the persistent prior, including under severe illumination variations and dynamic occlusions.

0.14

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.61
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

DrawSplat: Atlanta World-Guided Implicit Gaussian SLAM for Indoor Reconstruction

cs.CV cs.RO ·2026-10-30 ·Fan Zhu, Zhisong Xu, Ziyu Chen, Zhenjun Zhao, Takayuki Okatani
similarity 0.61
Abstract

RGB-D SLAM requires accurate online tracking, high-quality rendering, and geometrically consistent reconstruction. Existing Gaussian SLAM methods mainly optimize Gaussian primitives with photometric, depth, or local frame-to-model constraints, which are often insufficient in indoor scenes with weak textures, large planar structures, noisy depth, and long trajectories. The resulting maps may suffer from pose drift, surface thickness artifacts, noisy normals, and blurred structural boundaries. We propose DrawSplat, an Atlanta World-guided implicit Gaussian SLAM framework for indoor reconstruction. DrawSplat follows a drawing-like process: explicit point-line geometry first sketches the structural layout, and implicit neural Gaussians then fill in high-fidelity appearance and continuous geometric details. It estimates camera poses, sparse geometry, and gravity direction through point-line joint tracking, infers structural planes from tracked lines using the shared-gravity component of the Atlanta World prior, and converts them into differentiable regularization terms on Gaussian centers and normals. To improve compactness and efficiency, DrawSplat further combines an anchor-based implicit neural Gaussian representation with adaptive structural sampling, which allocates Gaussian capacity to structurally informative regions. Experiments on multiple datasets show that DrawSplat achieves robust tracking, high-fidelity rendering, and strong geometric reconstruction among Gaussian-based SLAM systems, while maintaining a practical balance among quality, efficiency, and model size.

0.15

Robust Structureless Monocular Visual Inertial Initialization Exploiting Line Features and Vanishing Points

cs.RO cs.CV ·2026-09-18 ·Junwan Choi, Woongrae Jo, Dong-Uk Seo, Jinwoo Jeon, Hyun Myung
publishedbenchmarkcode/data similarity 0.61
Abstract · 8 pages, 5 figures, Accepted to IROS 2026

Accurate initialization is essential for reliable visual-inertial odometry (VIO), but it is often ill-conditioned under degenerate motions. Existing methods typically require restrictive excitation motions to ensure sufficient observability or rely on computationally expensive 3D structure reconstruction, limiting efficient and practical deployment. To address these limitations, we propose SLIM-init, a structureless monocular VIO initializer that directly exploits geometric constraints from tracked 2D line features without explicit 3D landmark reconstruction. Specifically, SLIM-init leverages line-derived vanishing points (VPs) as translation-invariant orientation cues to provide robust rotation-only constraints under degenerate scenarios such as low-parallax or translation-dominant motions. It further incorporates a line epipolar residual to constrain translation and a line-normal projection residual to improve the conditioning of linear alignment, enhancing the accuracy and robustness of initial state estimation. Extensive experiments on a public benchmark and challenging custom degenerate-motion sequences demonstrate improved accuracy and robustness over state-of-the-art initialization methods. The source code is available at: https://github.com/cjunwan/SLIM-init.

0.44

VkVIO: Cross-platform GPU Acceleration for Visual-Inertial Odometry with Vulkan

cs.RO cs.CV ·2026-09-24 ·Ole Hoffmann, Mateo de Mayo, Daniel Cremers
similarity 0.60
Abstract

Perception in robotics and XR fundamentally relies on good state estimation. Visual-inertial odometry (VIO) and Simultaneous Localization and Mapping (VI-SLAM) are proven ways of achieving this goal in a cost-effective and accurate manner. Efficiency in these systems allows for smaller, cooler, and lighter devices. GPU acceleration is a natural approach for reducing latency, thanks to their wide availability in platforms like embedded computers, mobile phones, and XR headsets. However, previous works in the literature have limited themselves to the use of CUDA for this task, significantly reducing deployment options to a single vendor. We instead leverage the vendor-agnostic Vulkan API, originally designed for the strict performance requirements of 3D graphics applications. In this work, we present VkVIO, the first, to the best of our knowledge, cross-platform GPU-accelerated VIO method. We provide state-of-the-art accuracy with causal estimates required for real-time operation. We deploy VkVIO on a diverse range of devices spanning a workstation, a laptop, and an extremely inexpensive single-board computer, while outperforming CUDA-based systems on the same hardware. VkVIO enables possibilities for low-latency, low-power, and low-cost VIO in robotics and XR.

0.25