CS Paper Radar

Learning Unsteady Aneurysm Hemodynamics with Physics-Informed DeepONets

Oscar L. Cruz-Gonzalez, Valérie Deplano, Badih Ghattas

cs.LG stat.MLphysics.flu-dyn ·submitted 2026-08-13 09:08 UTC · v1

Abstract

Clinically actionable, patient-specific hemodynamic assessment, specifically wall shear stress, vortex structure and pressure distributions, is critical for determining risky or unfavorable evolution in Abdominal Aortic Aneurysms (AAA). While Physics-Informed Deep Operator Networks (PI-DeepONets) show promising results in complementing established 5 tools such as Computational Fluid Dynamics (CFD), a persistent architectural challenge remains for complex 3D flows. In this direction, we propose a Modified Multi-Input Multi-Output PI-DeepONets (M3PI-DeepONet) designed for predicting unsteady flows in an idealized AAA geometry. Central to our model is the Aggregated Injection strategy, where latent representations from multiple input branches are fused prior to trunk injection, allowing the coordinate basis to adapt to multiple physical constraints. To the best of our knowledge, this is the first architecture to combine the layer-wise gating mechanism with a multi-branch operator-network topology, yielding an input-adaptive trunk basis. Additionally, we integrate the 3D Navier-Stokes equations as governing physical laws, so the model is trained based on physics-informed residuals, initial and boundary conditions, and only 0.3% of the labeled internal data together with the selected branch-conditioning signals. The M3PI-DeepONet simultaneously predicts unsteady 3D flow velocity and pressure fields with an average relative L2 velocity error below 4% and pressure error around 5% while achieving a conservative retained-cycle inference speedup of approximately 36x compared to reference CFD simulations once the branch inputs used for conditioning are available. This work advances the application of deep learning in cardiovascular disease modeling, marking step toward real-time, non-invasive clinical diagnostics.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics Informed Neural Network model for the dynamical study of Abdominal Aortic Aneurysm

cs.AI physics.flu-dyn ·2026-09-14 ·Adrián Robles Arques, Martín Ruiz Fernandez, Javier Sanchis, Miguel A. Teruel, Juan Trujillo
similarity 0.73
Abstract · 38 pages, 9 figures and 2 tables

We present the development and application of a three-dimensional Physics-Informed Neural Network (PINN) framework for the investigation of haemodynamic behaviour in the human aorta. The model incorporates a time-resolved simulation of pulsatile blood flow over a two-minute interval, enabling the extraction of pressure and velocity fields with high temporal fidelity. The mechanical stress exerted on the aortic wall was quantified through Laplace's law, with temporal averaging applied to derive representative stress distributions. This approach circumvents the computational overhead associated with conventional computational fluid dynamics (CFD) methods by eliminating mesh generation and exploiting the automatic differentiation capabilities inherent to neural networks. The proposed methodology demonstrates that PINNs can serve as an efficient and accurate alternative for modelling complex vascular flow phenomena, offering significant advantages in scalability and computational cost reduction while maintaining physical consistency.

0.20

Physics-Informed Hemodynamic Modeling for Data-Free Prediction and Sparse-Data Assimilation

eess.IV cs.AI ·2026-09-16 ·Xi Chen, Jianchuan Yang, Hongde Li, Guangxin He, Qiuyu Ye +3 more
similarity 0.69
Abstract

Clinical decision-making for coronary intervention relies mainly on angiography and fractional flow reserve (FFR). However, angiography is two-dimensional and lacks depth information for 3D lesion characterization, while FFR provides only a single functional index, offering limited hemodynamic insight. Among existing methods, numerical analysis is computationally expensive, whereas learning-based approaches require extensive supervision and often lack physical consistency. To address these limitations, we propose physics-informed hemodynamic modeling, an integrated deep learning framework for 3D coronary blood flow analysis from dual-view angiography. First, an attention-enhanced CNN reconstructs coronary geometry from angiography. The resulting point clouds are then mapped to a reference domain and Fourier-encoded for joint representation. A decoupled network separately predicts velocity and pressure fields, with embedded physical priors enabling efficient transfer across physiological conditions. Across 32 clinical patients evaluated under four flow conditions, the trans-stenotic pressure-drop mean absolute percentage error was 2.02%, while the velocity and pressure relative-L2 errors were 0.054 and 0.023, respectively. Validation against hospital-measured FFR further achieved 93.8% diagnostic accuracy (30/32; exact 95% CI, 79.2%-99.2%). The framework also supports illustrative revascularization comparisons and sparse-data assimilation, with the full angiography-to-hemodynamics pipeline completed within 20 minutes per patient.

0.11

The importance of tensor handling and implementation of physics-informed DeepONets

cs.LG physics.comp-ph ·2026-10-15 ·Nahum Banks, Gustavo A. M. de Almeida, Sergio Maldonado
similarity 0.66
Abstract

Physics-informed neural networks (PINNs) reduce or eliminate the need for large labelled datasets by enforcing governing equations during training. Physics-informed Deep Operator Networks (PI-DeepONets) extend this approach to learning solution operators, enabling rapid prediction across families of problems. Despite these advantages, we show that their application to higher-dimensional problems remains limited by the computational cost of training. To address this issue, we propose a modified PI-DeepONet architecture that reduces this cost by removing redundancy in how the Branch network processes input functions across collocation points. The proposed formulation is mathematically equivalent to the original architecture but reduces input tensor sizes and the number of Branch network evaluations. We analyse the computational complexity of both architectures and derive theoretical scaling laws for training time with respect to the number of collocation points and input functions. The proposed architecture is evaluated on 1D, 2D, and 3D linear advection problems. In all cases, it achieves comparable predictive accuracy to the original PI-DeepONet while consistently reducing training time. In 2D experiments, a maximum speed-up of $3.75\times$ is observed, with empirical training-time scaling agreeing with the predicted linear dependence on collocation points and input functions. Furthermore, training a 3D model on an NVIDIA A100 GPU is only feasible using the proposed architecture, as the original formulation exceeds memory limits. These results demonstrate that careful consideration of how PI-DeepONets are implemented can yield substantial gains, enhancing the practical performance of PI-DeepONets and enabling their application to otherwise intractable physics-informed learning problems.

0.12

Synthetic Dataset Generation, Physical Consistency and Active Learning for Shape-Informed Surrogate Modeling of Hemodynamics

cs.CE physics.flu-dyn ·2026-10-19 ·Francesco Romor, Richard Schussnig, Charles A. Taylor, Gerhard A. Holzapfel, Alfonso Caiazzo
similarity 0.64
Abstract

Model order reduction has the potential to enable real-time patient-specific assessment of cardiovascular flows. However, it still faces significant challenges stemming from the geometric variability of vascular anatomies. Building upon the SynthAorta dataset (Bosnjak et al., IEEE Trans. Med. Imag. 45(1), 2026) of physiological aortic geometries, we generate an extensive dataset of physiologically consistent computational fluid dynamics solutions through an automatic boundary-condition adjustment procedure. A common reference geometry allows all patient-specific anatomies to be represented by displacement fields, providing point-to-point correspondence without the need for geometric registration. Based on this dataset, we develop Graph U-Net and Transformer U-Net surrogate models to predict velocity and pressure fields at peak systole. We further investigate two strategies to enhance data efficiency and prediction accuracy: active learning and differentiable physical consistency constraints based on the finite element residual. The results show that active learning is strongly regime-dependent: while it offers little benefit over random sampling during early training, it improves performance during fine-tuning through gradient- and subspace-based acquisition strategies. Similarly, physical consistency constraints prove to be substantially more effective as a fine-tuning objective than as a regularizer applied throughout training. Finally, out-of-distribution studies demonstrate that the primary limitation of surrogate models lies in the geometric support of the underlying parametrization rather than in the neural network architectures themselves. The proposed framework combines synthetic dataset generation, geometry-aware surrogate modeling, physics-informed optimization, and active learning into a scalable workflow for inter-patient hemodynamic prediction.

0.03

Reconstruction of 4D Mitral Regurgitation Hemodynamics from Sparse Planar Data using Deep Operator Networks with Test-Time Adaptation

cs.LG physics.med-phphysics.flu-dyn ·2026-08-31 ·Jakob Marcel Hoffmann, Yosuke Hasegawa, Alexander Stroh
similarity 0.64
Abstract

Quantifying mitral regurgitation severity remains limited by the assumptions of clinical flow convergence methods, while high-fidelity simulation and volumetric velocimetry are too slow for routine use. We investigate whether a learned solution operator can reconstruct transient three-dimensional transvalvular hemodynamics from the sparse observation an in-vitro experiment actually provides: a single planar velocity slice and two boundary pressure traces. A Deep Operator Network is pretrained on an experimentally benchmarked URANS database spanning eleven mitral regurgitation orifice phantoms, learning a mapping from a masked two-component planar velocity snapshot to the surrounding volumetric field, and is subsequently adapted to unseen target cases by fine-tuning on their sparse measurements. Adaptation reliably corrects the flow topology within the supervised plane, reorienting a strongly eccentric jet that the pretrained operator predicts as straight, and yields full-field predictions in minutes rather than the days required by the underlying simulations. Its influence decays sharply with distance from that plane, however: measured against phase-resolved particle image velocimetry, the reconstruction error rises from 24.6% at 2mm to 52.6% at 6mm, and the resulting mismatch between corrected and uncorrected layers degrades physical consistency. Single-plane supervision thus constrains the observed plane far more effectively than the surrounding volume, which we identify as the principal obstacle to coherent 4D reconstruction from sparse planar data.

0.18

Shaping the Wind: Nested Potentials for Kinematically Admissible Urban Wind Prediction

cs.LG ·2026-10-04 ·Yidi Wang, Yunhe Zhang, Jiawei Gu, Ziyue Qiao, Pengyang Wang
dataset similarity 0.62
Abstract

Predicting transient urban winds is fundamental to understanding urban microclimates and designing climate-resilient cities. Building-resolving large-eddy simulation produces detailed incompressible urban wind fields at substantial computational cost for each layout. Neural surrogates offer a faster alternative by learning to predict the evolution of velocity fields. However, minimizing velocity prediction error does not guarantee local mass conservation and wall impermeability, which together define kinematic admissibility. This limitation stems from an unconstrained output representation: geometry conditioning guides predictions but does not restrict them to admissible velocity fields. Correcting boundary violations in these outputs changes the flux balance in adjacent fluid cells and may consequently compromise local mass conservation. To address the challenge, we propose Sculpt, a nested potential framework that builds the coupled, geometry-dependent constraints directly into its parameterization. This nested parameterization generates divergence-free velocity updates through the discrete curl of a volume vector potential on the native three-dimensional staggered grid. A shared scalar potential constrains the vector potential's boundary values so that the same operator also enforces impermeability, without a per-step pressure projection. Because backpropagation through this curl attenuates large-scale gradient signals, we parameterize the volume potential at multiple resolutions to better capture large-scale flow structures. We introduce UrbanWindFlow, an LES dataset spanning urban morphologies and inflow conditions, to evaluate accuracy and kinematic admissibility together.

0.15

Solving and Learning Navier-Stokes Dynamics with the Neural Basis Method

cs.LG physics.flu-dynmath.NA ·2026-10-23 ·Yuhe Wang, Zhu Wang, Min Wang
similarity 0.62
Abstract · 23 pages, 6 figures

Physics-informed machine learning has become a major direction in predictive modeling of fluid dynamics, combining governing physics with learned representations. Yet prevailing formulations neither guarantee that small PDE-residual losses imply small solution errors nor scale effectively with increasing problem size. Here we present the neural basis method (NBM) as a new approach for Navier--Stokes dynamics. NBM is built on a ``representation-then-projection'' principle: fixed neural bases define the representation space, while projection of the governing equations determines the expansion coefficients. The same bases define common coordinates for the parametric solution manifold, recasting operator learning as a parameter-to-coefficient mapping and enabling scalability by removing explicit spatial dependence. For incompressible flow, NBM yields a velocity-only formulation whose residual provides an a posteriori velocity-error estimate, establishing a certified, data-free training objective for coefficient learning. Theoretical analysis and numerical experiments demonstrate the accuracy, efficiency, generalization, and scalability of NBM, with substantial improvements over baselines.

0.19

Anatomy-Informed Neural Networks: Encoding Anatomic Priors in Loss and Architecture, with an SE(3) Formulation of Guidewire-Induced Aortoiliac Deformation

cs.AI cs.CVcs.RO ·2026-08-21 ·David P. Stonko
similarity 0.62
Abstract · 42 pages, 10 figures, 4 tables

Deep-learning models of anatomy can be numerically plausible yet anatomically impossible, and they generalize poorly when data are scarce. We introduce Anatomy-Informed Neural Networks (AINN), in which soft anatomic priors enter as penalty terms in the loss (e.g., a branching penalty that treats a renal transplant artery off the iliac instead of the aorta as unexpected rather than impossible), in direct analogy to a physics-informed neural network, and hard anatomic priors (e.g., continuity of the vessel) are built into the architecture and state representation, making such invalid predictions impossible by construction wherever the prior admits architectural enforcement. We develop it on a clinical test case with limited data: how the aortoiliac tree deforms when a stiff wire is introduced endoluminally. This is important to contemporary aortic surgery and will matter to autonomous endovascular navigation. We lift the vessel centerline and the wire path from R^3 to curves of frames in the Lie group SE(3), and couple a Cosserat-rod wire to a tortuosity-modulated, anatomically anchored vessel through a unilateral lumen-contact inequality. The prediction is a constrained minimizer of the coupled elastic energy, with contact forces as its Lagrange multipliers. Supervision is a Wasserstein-2 optimal-transport loss between the predicted projection through the C-arm geometry and the observed angiogram, so a 2D angiogram can train a 3D prediction. The kinematics, loss and projection are verified against known ground truth; the mechanics solver only against its own optimality conditions, and predicted displacement is not yet mesh-converged. Here, no network is trained. Future work will transfer this in silico model to real CT scans and test whether it improves predictive accuracy and reduces the training data required.

0.31