CS Paper Radar

From crown candidates to neighborhood screening: integrating optical GeoAI and spatial modeling for urban-canopy assessment in Davis, California

Mohammadreza Narimani, Shreyan Mitra, Parastoo Farajpoor

eess.IV cs.CVstat.AP ·submitted 2026-08-14 01:02 UTC · v2
code/datahighly cited

Abstract

Timely urban-canopy information is essential for linking remote sensing with heat, mobility, and neighborhood planning. We developed an optical GeoAI workflow for Davis, California, using 2022 National Agriculture Imagery Program imagery (0.6 m RGB+NIR). DeepForest generated crown candidates; an NDVI threshold, non-maximum suppression, and box-prompted Segment Anything Model (ViT-B) produced a crown-anchored canopy surface. Analyses used the 25.92 km2 Census TIGER municipal boundary and a 100 m grid. The workflow retained 11,741 candidate crowns and mapped 7.71 km2 of canopy (29.8% of the city). On the identical extent, pixel precision was 0.804, pixel recall was 0.873, and 97.4% of candidate centers agreed with the 2022 USDA/CAL FIRE LiDAR-assisted canopy product (IoU 0.719; Dice 0.837; area recovery 108.5%). Approximately 49% of candidates occurred within 15 m of a road. Canopy was inversely associated with Landsat land-surface temperature (Spearman rho = -0.477; partial rho = -0.551 controlling for built probability), and spatial-lag modeling confirmed clear neighborhood structure. Two transparent attention surfaces combined canopy need with thermal and contextual indicators. The framework provides a reproducible, updateable screening layer that complements structural canopy products and municipal inventories while retaining assumptions, data provenance, and spatial diagnostics for planning interpretation.

Comment
17 pages, 10 figures + 5 supplementary figures, 7 tables. Revised preprint (expanded canopy infill; IoU 0.719). Preprint submitted to Taylor & Francis. Code: https://github.com/MohammadrezaNarimaniUCDavis/Davis_Urban_Canopy_GeoAI Data: https://doi.org/10.5281/zenodo.21925526

Closest papers

Nearest neighbours by meaning across the whole index.

Rapid Loss of the Sierra Nevada's Largest Trees Driven by Fire

cs.CV ·2026-09-15 ·Fabien H. Wagner, Dan J. Dixon, Christopher W. Woodall, Mayumi C. M. Hirye, Felipe Saad +13 more
similarity 0.65
Abstract · 40 pages, 13 figures

Large trees disproportionately contribute to biomass storage, habitat structure, and ecosystem functioning. However, their distribution and health dynamics remain poorly quantified at a regional scale. Here, a deep learning model (U-Net-ID) and canopy height models derived from sub-meter aerial imagery from 2020 were used to delineate all individual trees with crown area $\geq$ 100 m$^2$ across the Sierra Nevada Floristic Province. The model was trained using more than 3.3 million synthetic tree crowns and achieved a median Intersection over Union (IoU) of 0.602 when validated against an independent dataset of 20,273 crowns. A total of 6,515,705 large trees were mapped, occurring across approximately 78.7% of the Sierra Nevada Floristic Province. The spatial distribution of large trees showed associations with elevation, temperature, and precipitation. Using Sentinel-2 time series from 2020 to 2025, tree health dynamics were characterized by extracting spectral trajectories for each crown and applying BFAST breakpoint detection algorithm combined with a disturbance classification framework to identify mortality, disturbance, and recovery trajectories of individual trees. Wildfires, estimated from CAL FIRE fire perimeters, were identified as the dominant driver of large-tree mortality, killing 10% of all large trees in the Sierra Nevada, with mortality strongly concentrated during the extreme 2020-2021 fire seasons.

0.37

Multisource Remote Sensing and Geospatial Analysis of Vineyard Wildfire Impacts and Exposure: The 2019 Kincade Fire

eess.IV cs.CVphysics.ao-phphysics.geo-ph+1 ·2026-09-14 ·Parastoo Farajpoor, Mahla Ardebili Pour, Mohammad Bagher Ghiasi, Mohammadreza Narimani
publishedcode/datahot direction similarity 0.61
Abstract · 18 pages, 11 figures, 4 tables. Accepted for publication in Frontiers in Sustainability (in press). Data: https://doi.org/10.5281/zenodo.227…

Working agricultural landscapes are often treated as background to wildfire disasters, even though they are managed fuel mosaics, productive assets, and parts of regional infrastructure systems. We examine vineyard wildfire resilience during the electrically initiated 2019 Kincade Fire in Sonoma County, California, using an open, event-anchored geospatial framework spanning 4,581 vineyard fields (8,813.2 ha), wildland vegetation, surveyed structures, roads, overhead smoke, and post-fire greenness. Sentinel-2, OpenET, gridMET, soils, terrain, NOAA smoke polygons, an ignition-date OpenStreetMap network, and three-dimensional data inventories were analyzed at native decision scales. Vineyard pixels showed substantially lower descriptive dNBR than wildland pixels inside the perimeter (means 0.130 and 0.337). This contrast did not identify a universal vineyard firebreak effect: a segment-clustered boundary model gave a small negative contrast at 100 m (tau = -0.0166) but changed across bandwidths, failed slope continuity, disappeared in a 100 m donut, and produced a wrong-signed placebo. A 250 m spatial GAM reversed the unconditional pattern: after conditioning on location, terrain, and water use, vineyard fraction was positively associated with dNBR, while residual Moran's I remained 0.519. Beyond spectral impact, all mapped vineyards intersected overhead smoke on at least one day (mean 7.78 potential smoke-days per field), 34.2% of road-network nodes were dead ends, and inside-perimeter vineyards showed a larger greenness deficit through 2021 (recovery ratios 0.815 inside and 0.854 outside). Lower immediate spectral impact therefore did not imply complete resilience. The study provides a reproducible urban-rural informatics template separating descriptive contrasts, conditional associations, exposure indicators, and recovery evidence for decisions in working landscapes.

0.81

Latent Commonality Expectation-Maximisation for Box-supervised Tree Crown Instance Segmentation

cs.CV ·2026-09-22 ·Thomas Pitts, Kunqi Li, Bin Liang
benchmark similarity 0.60
Abstract · 37 pages, 18 tables. Code and model checkpoints to be released upon publication

Individual tree crown segmentation from aerial imagery underpins tree-level carbon accounting, biodiversity, and restoration monitoring at landscape scale. However, existing models are predominantly trained on dense canopy forest imagery and degrade in savannah and drylands, where tree crowns are sparse, of variable appearance, and underrepresented in annotated benchmarks. These models also typically depend on costly polygon annotations. We introduce LACE (LAtent Commonality Expectation-maximisation), a box-supervised instance segmentation model, evaluated on 0.1 m/px aerial RGB tree crown imagery. LACE uses a frozen DINOv3-web ViT-L/16 encoder, applied at four spatial offsets and interlaced into a denser feature grid, with a lightweight CenterNet-style detection head trained solely on bounding boxes. We use expectation-maximisation to separate recurring appearance, the "treeness", within bounding boxes from surroundings. On the OAM-TCD benchmark test set, LACE reaches a mask AP$_{50}$ of $0.663 \pm 0.001$ (3 seeds) trained on 900 box-annotated images and without mask annotations, above the 0.626 scored by Restor's released mask-supervised Mask R-CNN, which was trained on the full ~4.2k image set. On a sparse-canopy holdout set, mask AP$_{50}$ rises to $0.691$ versus $0.612$ for Detectree2, a mask-supervised baseline. On NeonTreeEvaluation, using the official evaluation code, LACE reaches $0.728 \pm 0.003$ F1@0.4 (5 seeds) from 23,424 hand-annotated RGB boxes alone, matching the authors' DeepForest model's published 0.719, using under 0.1% of its training annotations and none of its LiDAR-derived 30M-crown pretraining set. By leveraging frozen self-supervised features, LACE matches or surpasses fully-supervised specialist baselines from boxes alone, removing the need for polygon annotation in tree crown instance segmentation for sparse-canopy environments where labelled data is scarce.

0.38

Explainable GeoAI for urban wildfire structure loss: vegetation and built environment in the 2025 Palisades Fire

cs.LG physics.geo-pheess.IV ·2026-08-23 ·Parastoo Farajpoor, Mohammadreza Narimani
publishedcode/data similarity 0.60
Abstract · 20 pages, 13 figures, 4 tables (original preprint). Published in Frontiers in Sustainability, Volume 7, Article 1975724 (2026). Published ve…

Urban wildfire resilience depends on interactions among built form, vegetation condition, and extreme fire weather, yet city-scale risk models often overlook whether predictive skill transfers across neighborhoods. We developed a spatially validated GeoAI workflow for the January 2025 Palisades Fire, linking 12,081 CAL FIRE damage inspections to pre-fire Sentinel-2 vegetation indices, Landsat surface temperature, LANDFIRE fuels, terrain, and OpenStreetMap buildings and roads. Among 9,883 inspected residential structures, 5,566 were destroyed. Random cross-validation yielded ROC-AUC 0.92 for the integrated XGBoost model, but 1 km spatial block validation reduced performance to 0.75; logistic regression performed similarly and was better calibrated. Building count within 100 m was the strongest predictor, with destruction odds increasing 4.12-fold per standard deviation. Vegetation moisture and greenness showed opposing conditional associations: NDMI at 100-300 m was protective (OR 0.52), whereas NDVI at 30-100 m was positively associated with destruction after accounting for moisture (OR 1.74). Predictive information was concentrated at the 100-300 m neighborhood scale. A separate post-fire track mapped burn severity and vegetation recovery without leakage. The results support neighborhood-scale susceptibility screening, moisture-aware vegetation management, and spatial block validation as a minimum standard for single-event urban wildfire modeling.

0.75

A Systematic Evaluation of the COTQ Provincial Land Cover Product: Structural Consistency, Spectral Separability, and Relative Positioning Against ESA, ESRI, and Google Products

cs.AI ·2026-09-15 ·Étienne Clabaut, Samuel Foucher, Yacine Bouroubi
similarity 0.60
Abstract · 46 pages

High-resolution land use and land cover (LULC) products derived from Sentinel-2 imagery are widely used for environmental monitoring and land management, yet their performance can vary across regions with complex ecological gradients and heterogeneous surface conditions. In Quebec, these limitations motivated the development of a provincial 10-m land-cover product, the COTQ, designed to support annual monitoring of land occupation and soil artificialisation. This study presents a systematic evaluation of the COTQ product relative to three global 10-m LULC datasets: ESA WorldCover, ESRI LandCover, and Google DynamicWorld. This paper does not introduce a new mapping methodology but focuses on analysing the behaviour and consistency of the COTQ using complementary evaluation approaches. All products are harmonized under a common legend and compared using structural indicators (object-size distributions, shape complexity, Adjusted Rand Index, and Intersection over Union), spectral separability metrics derived from Sentinel-2 reflectance data, and a targeted photo-interpretation of disagreement areas. The analysis is conducted over eight Sentinel-2 tiles selected to represent the main bioclimatic domains of Québec, from temperate and boreal forests to northern tundra environments. The results show that the COTQ exhibits structural and spectral characteristics most similar to ESA WorldCover among the reference global products, while revealing systematic differences linked to class definitions and thematic priorities, particularly for urban areas, wetlands, and rocky or cryptogamic surfaces. This multi-criteria evaluation provides an objective characterization of the COTQ product and clarifies its relative positioning with respect to existing global land-cover datasets for operational land monitoring in Québec.

0.28

Sub-Meter Canopy Height Synthesis from Sentinel-2 via Anchored Residual Flow

cs.CV cs.LG ·2026-11-17 ·Kiarie Ndegwa, Tony Chang, Andreas Gros, Vincent A. Landau, David D. Diaz +3 more
hot direction similarity 0.59
Abstract · 30 pages, including appendices

Canopy height models (CHMs) - per-pixel maps of vegetation top height - are essential for forest carbon accounting, wildfire fuel mapping, and tree-level ecology, yet sub-meter CHMs require airborne LiDAR refreshed on multi-year national cycles. We produce 0.5 m CHMs from free 10 m Sentinel-2 imagery, a 20$\times$ cross-modal super-resolution task where optical reflectance must predict geometric height it does not directly observe. Motivated by the perception-distortion trade-off, we derive two operating points with shared conditioning. A deterministic regressor (Anchor) targets low distortion; a conditional flow matching model, trained on the Anchor's residual in a learned CHM latent space (AR-flow), targets perceptual fidelity. Trained on 197k LiDAR-paired tiles spanning 69 ecoregions across the contiguous United States and evaluated on 2,530 held-out tiles against eight baselines, the Anchor achieves 2.83 m MAE using only free satellite input. The AR-flow reduces sliced Wasserstein distance from the Anchor's 1.13 to 0.208, at a higher MAE of 3.68 m. Crown-scale statistics improve, but strict individual-tree detection remains weak: generated sub-pixel detail represents plausible structure rather than measured individual trees. Quarterly continental refresh becomes tractable, letting satellite monitoring inform timing and extent for more expensive data acquisitions.

0.39

Using GeoAI and machine learning tools for consistent high-resolution land cover mapping based on time-series NAIP imagery

cs.CV ·2026-11-03 ·Jie Liu, Xusheng Tang, Chao Wang, Zhengxiao Yan, Yuchen Dai +2 more
publishedhot direction similarity 0.58
Abstract · 17 pages. Published version

High-resolution land-cover maps support ecological monitoring, but consistent historical time series remain scarce because aerial imagery varies across years and sensors. We developed a dual-track workflow to produce temporally coherent 1-m land-cover maps from National Agricultural Imagery Program (NAIP) imagery without historical training samples. For higher-quality imagery from 2009-2017, we used a pretrained U-Net/ResNet-34 model and refined boundaries with the Segment Anything Model (SAM). For lower-quality imagery from 2004-2008, we reconstructed land cover through an NLCD-based spatiotemporal bridging and label back-casting pipeline. Evaluation across six counties in North Carolina and Pennsylvania yielded overall accuracies of 0.887 (2014), 0.886 (2017), and 0.733 (2004). Structure, Water, Wetland, and Cropland consistently achieved high F1-scores. The workflow integrates GeoAI and multiple data sources to address temporal heterogeneity in historical aerial imagery, supporting high-resolution land-change analysis and landscape planning across the conterminous United States.

0.43

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

cs.CV ·2026-09-30 ·Edyta Puniach, Wojciech Gruszczyński, Paweł Ćwiąkała, Katarzyna Strząbała, Elżbieta Pastucha
publishedhighly cited similarity 0.57
Abstract

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

0.63