CS Paper Radar

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

Edyta Puniach, Wojciech Gruszczyński, Paweł Ćwiąkała, Katarzyna Strząbała, Elżbieta Pastucha

cs.CV ·submitted 2026-09-30 17:22 UTC · v1
publishedhighly cited

Abstract

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

Journal ref
2024, Remote Sensing, 16(18), 3444
DOI
10.3390/rs16183444

Closest papers

Nearest neighbours by meaning across the whole index.

Vegetation Health Classification for Low-Data and Edge Hardware Deployment

cs.CV ·2026-11-14 ·Yifei Cheng, Haoyu Li
hot direction similarity 0.65
Abstract

Unmanned aerial vehicles (UAVs) equipped with cameras are popular, viable tools for vegetation and environmental health monitoring. However, existing image classification methods are incompatible with UAV implementation for independent practitioners in remote, resource-constrained environments due to large dataset requirements, GPU hardware, inflexible retraining, and low interpretability. This paper presents a lightweight, interpretable vegetation classification algorithm operating with as few as five reference images per class, without GPUs or heavy machine learning frameworks. It uses a 2D hue-saturation histogram feature representation and Earth Mover's Distance or Quadratic Form Distance, paired with a log-likelihood probability score, to classify images into three vegetation health categories. We evaluated six systems: three custom pipelines and three established models across low-data scenarios ($n = 5, 10, 25$) and a full-data regime of 2,172 drone images from 28 South American locations. Our custom pipelines achieve competitive Top-1 accuracy (81--85\%) under low-data constraints, maintaining sub-1ms inference times that enable real-time classification and subsequently tasks such as seeding and watering. The algorithms also support incremental retraining without full model reconstruction. We validate edge feasibility by deploying the QFD variant on an ESP32 microcontroller, achieving 82.8\% accuracy with 1.01\% heap memory utilization (45kb), demonstrating that effective vegetation classification is achievable on low-cost, low-power embedded hardware without cellular connectivity.

0.28

Remote Sensing and Machine Learning-Based Analysis of Land Use and Vegetation Change in Dhaka District, Bangladesh

cs.LG cs.AIcs.CV ·2026-08-12 ·Muhammad Masud Tarek, Md. Alamgir Hossain, Md. Samiul Islam, Muntasir Hasan Kanchan
similarity 0.64
Abstract · 16 Pages, 8 Figures, 9 Tables

Rapid urbanization in Dhaka District, Bangladesh has triggered substantial alterations in land use and environmental conditions, necessitating systematic monitoring for informed urban planning and ecological sustainability. This study employs remote sensing data and machine learning techniques to analyze spatiotemporal changes in land cover and vegetation dynamics between 2019 and 2024. High-resolution satellite imagery from Sentinel-2 MSI and Landsat 8 was utilized to classify land cover types and compute spectral indices including the Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), and Normalized Difference Water Index (NDWI). A supervised machine learning approach incorporating Decision Tree, K-Nearest Neighbors (KNN), and Random Forest classifiers was applied using labeled geospatial training points within Google Earth Engine. Accuracy assessments were conducted using confusion matrices and kappa statistics. Results indicate a 59.5% increase in urban built-up areas and a significant decline in vegetation (-8.46%) and water bodies (-7.77%) over the five-year period. Land conversion from vegetated and aquatic areas to urban infrastructure was identified as a dominant trend. Among the models, Random Forest demonstrated the highest classification accuracy. These findings underscore the growing environmental pressures driven by unregulated urban expansion in Dhaka. The study highlights the potential of remote sensing and machine learning tools in providing timely, actionable data to support sustainable urban development, land-use regulation, and ecosystem conservation policies.

0.10

Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

cs.CV ·2026-09-30 ·Wojciech Gruszczyński, Edyta Puniach, Paweł Ćwiąkała, Wojciech Matwij
published similarity 0.62
Abstract

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

0.45

Key Findings for Small UAS for Post-Disaster Damage Assessment from the CURSE'26 Exercise

cs.CV ·2026-10-21 ·Thomas Manzini, Stephen Johnson, Priyankari Perali, David Merrick, Robin Murphy
similarity 0.61
Abstract · 8 pages, 5 figures, 2 tables

The CLARKE building and road damage assessment AI classifier was incorporated into the Catastrophic Unmanned Remote Sensing Exercise (CURSE) 2026, which trained 23 small uncrewed aerial systems (sUAS) teams from state and local agencies and non-governmental organizations in Florida and Missouri on how to collect imagery for an incident command Remote Sensing Cell. Although CLARKE has been operationally deployed to two hurricanes (Debby and Helene), CURSE'26 presented an opportunity to evaluate the machine learning model with a larger set of never-before-seen orthomosaics. The results show that building and road damage assessment together ran in 3.5 minutes on average, and that building damage assessment achieved a Micro F1 of 0.834 with no manual adjustments to correct spatial misalignment and delivered that performance in both Florida and Missouri, demonstrating good geographic transfer. It also showed that road damage assessment performed poorly due to sensitivity to misalignment between road maps and the images, and to lighting and environmental conditions in an urban setting. The analysis of CURSE'26 presents five other findings of value to the sUAS community: that the use of sUAS and machine learning is now operationally normalized and accepted, sUAS teams in the field can improve classification accuracy by timing their flights, exercises are good operational tests but their value for evaluating learning models is less clear, edge computing is needed to overcome the wireless upload barrier, and the application of sUAS and AI to disaster response has ethical and legal ramifications for pilots and data managers.

0.20

Combining Object Detection with Geometry-Aware Clustering to Distinguish Overlapping Plants in UAV Imagery

cs.CV ·2026-09-18 ·Ik Jae Lee, Hieu D. Nguyen, Mahbubur Meenar, Carlos Morrison Martinez, Cameron Connelly
similarity 0.61
Abstract · 34 pages

Reliable plant-level information from unmanned aerial vehicle (UAV) imagery is important for automated crop monitoring. However, in dense crop canopies, adjacent plants frequently overlap and are detected as a single object, reducing the reliability of plant-level measurements. This study presents a geometry-aware post-detection framework for resolving overlapping plant instances using standard RGB UAV imagery. The framework combines object detection with geometric clustering of plant components. Leaves or branches detected within each bush-level region are represented using two complementary geometric features: component centroids and radial intersection points (RIPs) derived from detected plant structures. K-means and Gaussian mixture models determine whether a detected region contains a single plant or two overlapping plants. Density filtering suppresses spurious radial intersections, and a post-pipeline ensemble combines spatial and directional geometric information. The framework was evaluated using UAV imagery of eggplant and tomato crops under field conditions. Centroid-based clustering achieved an F1-score of 0.89 for eggplant, while the combined centroid-RIP approach achieved the best tomato performance, with an accuracy of 0.80, precision of 1.00, and F1-score of 0.75 using K-means. Density filtering substantially improved RIP-based clustering for tomato. The proposed approach provides a lightweight, modular engineering solution that can be integrated with existing RGB UAV monitoring pipelines without additional depth sensors, pixel-level segmentation, three-dimensional reconstruction, or retraining of the primary bush detector. The results demonstrate that geometric reasoning applied to existing detector outputs can complement deep-learning-based object detection and improve plant-level interpretation in dense agricultural canopies.

0.27

Early versus Late RGB-Infrared Fusion for Counter-UAV Detection: A Comparative Study

cs.CV ·2026-10-21 ·Alberto De Zan, Denis Tavaris, Gian Luca Foresti, Ivan Scagnetto
published similarity 0.61
Abstract · This version differs from the article published in IEEE Access. It includes revisions requested by the reviewers during the final review rou…

This paper presents a novel strategy for UAV detection through visible (RGB) and infrared (IR) fusion, in order to improve accuracy and precision in harsh environments and weather conditions. In this research, two opposite approaches have been studied and implemented: the first concerns image-level (early) fusion, which merges two different spectra into a single image to which one detector is applied. On the other hand, the second approach, called decision-level (late) fusion, focuses on blending together the output bounding boxes of two different detection pipelines, aiming to create a common result that can be applied to both spectra simultaneously. Both strategies have been extensively tested in a dedicated environment, which included alternating low and high brightness scenes, different backgrounds (sky and ground), distances (5, 25 and 60 m), altitudes and zoom levels (1X, 2X and 4X). These tests allowed for the assessment of actual detection capabilities and system reliability in real-world applications. Furthermore, the two fusion strategies were evaluated and compared over a set of aligned images in order to highlight the better approach of the two. The results indicate that early fusion achieves better raw performance, since it incorporates the thermal information from the beginning of the training process. However, late fusion presents an innovative and useful detection workflow that can be applied in cases of sensor or frame misalignment. Both positive and negative aspects have also been pointed out and discussed, in order to give a more comprehensive overview. Finally, the paper outlines implementation considerations and practical recommendations based on operational priorities. Overall, the findings contribute to the research in RGB-IR fusion modalities, with the goal of enhancing UAV detection capabilities.

0.38

Kolmogorov-Arnold Networks for Spatially Independent Multispectral Land Classification

cs.CV ·2026-08-13 ·Katherine L. Bauer, Teemu Harkonen, Simo Sarkka, Arturo Sanchez-Azofeifa
similarity 0.59
Abstract · 10 pages, 10 figures

Land classification from satellite imagery is important for land management, environmental monitoring, and urban planning. Machine learning methods such as random forests and multilayer perceptrons have shown strong performance on multispectral data, while the Kolmogorov-Arnold network has emerged as an alternative architecture with compact model structures. This study evaluates the Kolmogorov-Arnold network for land classification using Landsat 8 imagery and compares it with random forest and multilayer perceptron models. The models were trained and tested on data from Edmonton, Alberta and evaluated on an independent dataset from Calgary, Alberta across five land classes: agriculture, urban, water, forest, and bare ground. For the Calgary dataset, the Kolmogorov-Arnold network matched the accuracy of the random forest and outperformed the multilayer perceptron, while requiring substantially fewer trainable parameters and providing greater interpretability.

0.10

A 10K drone image dataset with component-level annotations for rooftop photovoltaic inspection

cs.CV ·2026-11-10 ·Penglei Zhang, Wan Zhang, Ruizhe Deng, Bo Chen, Wenhao Duan +6 more
datasethot direction similarity 0.58
Abstract · 14 pages, 4 figures. Supplementary information is included as an ancillary file

Component-level information supports rooftop photovoltaic (PV) inspection, but recognizing individual components across complex scenes remains challenging. We present PVIS-10K, a dataset of 10,065 drone images with component-level annotations covering 63,632 physical PV modules across 22 rooftop installations. The high-resolution red-green-blue (RGB) images were acquired by unmanned aerial vehicles (UAVs, also known as drones) in Ningbo, Shaoxing and Shenzhen, China. Multi-angle oblique observations capture installation-height and scale variation, dense arrangements, occlusion, shadows and reflections. Three-dimensional delineation, reprojection and image-by-image review produced 3,516,675 image-level polygon annotations, stored in Common Objects in Context (COCO) format. Station-disjoint partitions support evaluation on unseen stations within and across cities. Four supervised models and text-prompted zero-shot Segment Anything Model 3 (SAM 3) provide full-resolution benchmarks of instance matching and foreground coverage. PVIS-10K supports component localization, delineation and image-based counting for drone-based rooftop PV inspection research.

0.23