CS Paper Radar

Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

Wojciech Gruszczyński, Edyta Puniach, Paweł Ćwiąkała, Wojciech Matwij

cs.CV ·submitted 2026-09-30 13:53 UTC · v1
published

Abstract

This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

Journal ref
2025, Remote Sensing, 17(18), 3259
DOI
10.3390/rs17183259

Closest papers

Nearest neighbours by meaning across the whole index.

Vegetation Health Classification for Low-Data and Edge Hardware Deployment

cs.CV ·2026-11-14 ·Yifei Cheng, Haoyu Li
hot direction similarity 0.64
Abstract

Unmanned aerial vehicles (UAVs) equipped with cameras are popular, viable tools for vegetation and environmental health monitoring. However, existing image classification methods are incompatible with UAV implementation for independent practitioners in remote, resource-constrained environments due to large dataset requirements, GPU hardware, inflexible retraining, and low interpretability. This paper presents a lightweight, interpretable vegetation classification algorithm operating with as few as five reference images per class, without GPUs or heavy machine learning frameworks. It uses a 2D hue-saturation histogram feature representation and Earth Mover's Distance or Quadratic Form Distance, paired with a log-likelihood probability score, to classify images into three vegetation health categories. We evaluated six systems: three custom pipelines and three established models across low-data scenarios ($n = 5, 10, 25$) and a full-data regime of 2,172 drone images from 28 South American locations. Our custom pipelines achieve competitive Top-1 accuracy (81--85\%) under low-data constraints, maintaining sub-1ms inference times that enable real-time classification and subsequently tasks such as seeding and watering. The algorithms also support incremental retraining without full model reconstruction. We validate edge feasibility by deploying the QFD variant on an ESP32 microcontroller, achieving 82.8\% accuracy with 1.01\% heap memory utilization (45kb), demonstrating that effective vegetation classification is achievable on low-cost, low-power embedded hardware without cellular connectivity.

0.28

The Impact of Processing Parameters on High-Accuracy Measurements in UAV Photogrammetry

cs.CV ·2026-10-01 ·Paweł Ćwiąkała, Edyta Puniach, Elżbieta Pastucha, Wojciech Gruszczyński
publishedhighly cited similarity 0.63
Abstract

Unmanned aerial vehicle (UAV) photogrammetry is increasingly used in applications requiring high accuracy, such as determining ground surface changes caused by landslides, mining, or microrelief transformation. While acquisition strategies have been widely studied, the influence of the processing workflow-particularly Bundle Block Adjustment parameter settings-remains insufficiently explored. This study addresses this gap through a systematic, full-factorial evaluation of 768 processing variants applied to ten UAV datasets collected over 1.5 years in a 220 ha study area. Eight key parameters were analysed. The results show substantial variability in final 3D accuracy: the best performing variant achieved a root mean square error (RMSE) of 16 mm, whereas the weakest reached 303 mm. The most influential factors were the number of ground control points, the application of additional camera calibration corrections, and the use of the Post-Processing Kinematic GNSS method for determining camera projection center coordinates. The study also evaluates how workflow optimization affects the accuracy of displacement, tilt changes, and horizontal strain determination. While random displacement errors remained stable (RMSE of ~6-7 mm), systematic errors were significantly reduced by over half in all axes, with vertical median absolute error decreasing from 14 mm to 7 mm in the optimized configuration compared to the baseline previously used by the authors. This study provides the first large-scale, practice-oriented assessment of how processing parameter selection shapes the accuracy of both photogrammetric products and deformation indices determination. The results offer actionable guidance for developing more robust and repeatable UAV photogrammetry workflows tailored to high-precision monitoring.

0.65

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

cs.CV ·2026-09-30 ·Edyta Puniach, Wojciech Gruszczyński, Paweł Ćwiąkała, Katarzyna Strząbała, Elżbieta Pastucha
publishedhighly cited similarity 0.62
Abstract

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

0.63

Deep Learning for Satellite-Based Mountain Hazard Screening: A Retrospective Failure Analysis on the 2021 Chamoli Rock-Ice Avalanche

cs.CV ·2026-11-16 ·Snigdhajyoti Rakshit
similarity 0.59
Abstract · 27 pages, 10 figures, 8 tables

The approach utilizes 10 bands from Sentinel-2 imagery, along with terrain information, in a deep learning pipeline to classify potential hazard sources in any given mountainous region. The performance of our model has been evaluated against the data collected during the rock-ice avalanche event in the Chamoli region in the Indian Himalayas on 7th February 2021. U-Net performs segmentation of the detected land surface in the satellite image, detects changes in the identify candidate hazard zones, and then the following steps are performed to calculate the potential energy using the Monte Carlo sampling for steepest descent (D8) flow paths, finding the exposed structures in the downstream locations, and ranking the zones depending on the risk score. In comparison to the simple spectral rule, our approach achieved the higher macro F1 score of 0.648 (as compared to 0.519). But the F1 score in case of rock and soil was low, being in the range of 0.3s. In case of optical change detection in winter, it's only that northeast-facing slope which couldn't be detected, as it was under 73% of shade prior to the incident. The parameters have been set for this particular scene alone and not independently; hence, this is a retrospective test, and this test locates a failure which has occurred earlier. The primary contribution of this paper is locating the pipeline leak.

0.24

GeoAI-based post-segmentation quality validation of building footprints via spatial feature engineering

cs.CV ·2026-08-10 ·Shah Imran Ahsan Chowdhury, Kazi Jihadur Rashid, Rajsree Das Tuli, Rahul Saha, Bulbul Ahammad
similarity 0.59
Abstract · 19 pages, 10 figures, 8 tables

Deep learning-based building footprint extraction from high-resolution imagery often produces topologically inconsistent vectors unfit for direct GIS database ingestion. To address this, we present a multidomain GeoAI quality control framework that automates error detection to systematically purify vector footprint databases. Candidate footprints were generated across five UAV survey sites in Bangladesh using U-Net (ResNet-34) and SAM-LoRA (ViT-B). The extracted raster masks were vectorized, geometrically regularized, and consolidated under a spatial-exclusivity constraint to eliminate duplicate representations. We used twenty-four predictors capturing geometric, spatial-contextual, and raster-derived spectral and texture properties. Machine Learning (ML) classifiers were trained on a development partition (Sites B-D) and rigorously validated on a spatially independent test set (Site E) excluded from hyperparameter tuning and class balancing. The experimental results demonstrate that geometric and spatial-contextual predictors using Decision Tree (DT) provide the most effective discriminatory evidence for identifying object-level boundary deformations. DT achieved an accuracy of 95.31%, an F1-score of 91.06%, and a Matthews correlation coefficient (MCC) of 0.880 on the unseen testing site. At the database level, this framework successfully identified 87.34% of erroneous footprints while maintaining 98.31% of acceptable structures, reducing the residual error proportion from 27.32% to 4.62% and improving final database purity to 95.38%. This translates into a relative error reduction of 83.09%. The findings indicate that post-segmentation object-level ML provides a highly transferable, robust mechanism for automated quality assurance in production-ready geographic information system (GIS) workflows.

0.10

CedarCypress3D: an annotated UAV-LiDAR dataset of individual trees in planted cedar and cypress forests

cs.CV ·2026-08-31 ·Katsuto Shimizu, Fumiaki Kitahara, Tomohiro Nishizono, Hideki Saito, Masayoshi Takahashi +6 more
code/data similarity 0.59
Abstract · 15 pages, 8 figures

Individual tree measurements derived from Light Detection and Ranging (LiDAR) mounted on Unmanned Aerial Vehicles (UAV) provide valuable information for forest inventory, ecosystem monitoring, and sustainable forest management. Recent advancements in machine learning have increased the demand for annotated datasets to develop and evaluate point cloud-based approaches, especially for individual tree segmentation. However, publicly available annotated UAV-LiDAR datasets in temperate forests are limited. In this article, we present CedarCypress3D, a manually annotated UAV-LiDAR dataset collected in Japanese cedar (Cryptomeria japonica) and Japanese cypress (Chamaecyparis obtusa) plantations in Japan. The dataset consists of UAV-LiDAR point clouds and field survey measurements from 34 circular plots across two sites with different topographic characteristics, along with terrestrial LiDAR point clouds available for a subset of 22 plots. A total of 1,627 trees were measured in the census field survey and manually annotated to match the corresponding trees in the UAV-LiDAR point clouds. For the subset of plots with terrestrial LiDAR data, semantic labels (i.e., stem and non-stem) were additionally assigned to tree points in the UAV-LiDAR data. CedarCypress3D provides high-quality annotated UAV-LiDAR data for developing and evaluating individual tree instance segmentation and semantic segmentation methods in temperate planted forests. The dataset can also support research on tree attribute prediction and multi-platform LiDAR analysis. The dataset is publicly available at https://doi.org/10.5281/zenodo.22168721.

0.33

Transferable Above-Ground Biomass (AGB) Estimation Model from Multi-Sensor Data with Sparse Field Calibration

cs.LG cs.CV ·2026-08-12 ·Pann Thinzar Seint, Bryan Atwood, Subas Chhatkuli
similarity 0.59
Abstract

Spatially continuous quantification of forest above-ground biomass (AGB) is what makes carbon accounting credible and mitigation strategies actionable. While field inventories provide high localized accuracy, they are spatially sparse; conversely, spaceborne LiDAR from the Global Ecosystem Dynamics Investigation (GEDI) offers broad biomass samples but lacks spatial continuity and systematic underestimation of high-biomass forests. This paper presents an operational framework centered on a single globally trained convolutional neural network (CNN) that is seamlessly adapted to each new landscape through a lightweight empirical field-calibration workflow. The global model combines optical (Sentinel-2), C-band SAR (Sentinel-1), L-band SAR (ALOS-2 PALSAR-2), and terrain (DEM) data. It is trained once against GEDI Level-4A biomass reference data spanning multiple regions and both wet and dry seasons so that it learns the persistent woody-structure rather than a single-date appearance. To avoid retraining for every landscape, the framework applies a small number of local field plots to fit a scale-and-bias correction that aligns the global prediction with ground truth in each region. The pipeline harmonizes sensor data onto a shared 10 m grid, derives vegetation indices and polarimetric ratios, computes per-band normalization stats, and trains the CNN with a hybrid log-domain SmoothL1 with RMSE loss for skewed biomass distribution. On held-out validation the global GEDI-based model achieved R^2 approximately 0.78 and RMSE approximately 22 Mg/ha. A subsequent field calibration combining Random Forest fine-tuning under a 10-fold cross-validation eliminates localized regional biases. This improves local validation performance to R^2 approximately 0.82 and reduces RMSE to approximately 15 Mg/ha, outperforming both the uncalibrated global model and the ESA CCI Biomass product against field plots.

0.04

MultiAltitudeSR: Multi-Altitude Agricultural UAV Image Super-Resolution via Physical Ground Sampling Distance Conditioning

cs.CV ·2026-10-18 ·Xintong Jiang, Yu Tian, Yixue Liu, Valerio Hoyos-Villegas, Viacheslav Adamchuk +1 more
similarity 0.58
Abstract · 27 pages, 12 figures

Unmanned aerial vehicles (UAVs) enable high-throughput platforms for crop monitoring but face a fundamental trade-off between flight altitude and image spatial resolution. Many existing super-resolution (SR) methods for UAV imagery rely on oversimplified synthetic degradation models and are restricted to fixed integer upsampling scales, limiting their ability to handle real-world degradations and varying flight altitudes. This study proposes MultiAltitudeSR, a framework that conditions feature modulation and reconstruction on source and target ground sampling distances (GSDs). MultiAltitudeSR trained jointly on real UAV images at altitudes of 10 to 70 m above ground level supports all 21 source-to-target altitude pairs without pair-specific fine-tuning, covering scale factors ranging from 1.18$\times$ to 6.03$\times$. The framework can be extended to additional source-target GSD combinations by incorporating corresponding image pairs into training. On the 20-to-10 m pair, the model achieved competitive perceptual performance compared with pair-specific baselines, with LPIPS of 0.2236, DISTS of 0.2431, and NIQE of 8.9020. Experiments using the same architecture demonstrated the value of acquiring real-world multi-altitude UAV image pairs for SR training, with real-pair training achieving better average reconstruction performance across the 21 altitude pairs than training with the tested synthetic degradation pipeline. Downstream zero-shot segmentation case studies illustrated task-dependent benefits of super-resolved imagery for crop monitoring, suggesting potential UAV flight-time savings through image acquisition at higher altitudes.

0.25