CS Paper Radar

Key Findings for Small UAS for Post-Disaster Damage Assessment from the CURSE'26 Exercise

Thomas Manzini, Stephen Johnson, Priyankari Perali, David Merrick, Robin Murphy

cs.CV ·submitted 2026-10-21 14:06 UTC · v1

Abstract

The CLARKE building and road damage assessment AI classifier was incorporated into the Catastrophic Unmanned Remote Sensing Exercise (CURSE) 2026, which trained 23 small uncrewed aerial systems (sUAS) teams from state and local agencies and non-governmental organizations in Florida and Missouri on how to collect imagery for an incident command Remote Sensing Cell. Although CLARKE has been operationally deployed to two hurricanes (Debby and Helene), CURSE'26 presented an opportunity to evaluate the machine learning model with a larger set of never-before-seen orthomosaics. The results show that building and road damage assessment together ran in 3.5 minutes on average, and that building damage assessment achieved a Micro F1 of 0.834 with no manual adjustments to correct spatial misalignment and delivered that performance in both Florida and Missouri, demonstrating good geographic transfer. It also showed that road damage assessment performed poorly due to sensitivity to misalignment between road maps and the images, and to lighting and environmental conditions in an urban setting. The analysis of CURSE'26 presents five other findings of value to the sUAS community: that the use of sUAS and machine learning is now operationally normalized and accepted, sUAS teams in the field can improve classification accuracy by timing their flights, exercises are good operational tests but their value for evaluating learning models is less clear, edge computing is needed to overcome the wireless upload barrier, and the application of sUAS and AI to disaster response has ethical and legal ramifications for pilots and data managers.

Comment
8 pages, 5 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Revisiting the Task of Building Damage Assessment by Satellite Imaging

cs.CV ·2026-10-09 ·Anthony Cioppa, Virgile Blua, Sébastien Piérard, Pietro Ceccato, Marc Van Droogenbroeck
hot direction similarity 0.69
Abstract · 82 pages, 2 figures, 9 tables, 160 references

Natural disasters such as earthquakes, tropical storms, and floods cause extensive damage to buildings, and rapid, reliable damage maps are essential to guide emergency response. Automating this task, referred to as building damage assessment (BDA), from satellite imagery, has become an active research topic at the intersection of remote sensing, computer vision, and machine learning, particularly since supervised deep learning methods were shown to outperform earlier handcrafted approaches. Yet, despite a decade of intense activity and the release of several large-scale datasets, the field lacks a shared foundation. This chapter revisits the task of BDA from first principles, organized around three pillars: data, evaluation, and methods. We first clarify the candidate task for- mulations and argue for a sensor-agnostic, instance-based definition that tolerates missing pre-event imagery. We then review existing datasets along the axes of sensing modality, temporal configuration, and geographic coverage. On the evaluation side, we show that prevailing practices, largely based on a single aggregate score, are theoretically fragile, and we lay the foundations of a more informative, ranking-based, multi-score protocol. We further review methods ranging from task-specific deep networks to recent Earth observation foundation models, noticing that generalization to unseen events and regions remains an open difficulty. Finally, we discuss how these elements can inform the organization of a BDA challenge, including cross-validation, challenge, and private data-sharing setups designed to build trust between developers and users.

0.31

Neighbourhood shortcuts in building damage assessment from very-high-resolution satellite imagery: diagnosis and a building-evidence plug-in

cs.CV ·2026-10-28 ·JianChong Guo, YuTing Wan, Kefan Li, AiLong Ma, YanFei Zhong
code/data similarity 0.67
Abstract · 22 pages, 9 figures, 11 tables. Code: https://github.com/SummerTide/neighbourhood-shortcut-bda

Building damage assessment (BDA) from very-high-resolution imagery supports disaster response, and deep models now achieve high overall accuracy on public benchmarks. Because damage is spatially clustered, most buildings share the damage level of their neighbours, so overall scores are dominated by such buildings, whereas damaged buildings among intact ones are rare and easily overlooked. A high overall score therefore cannot tell whether a model judges the building itself or relies on its neighbourhood as a shortcut, and this study tests which of the two current models do. We stratify buildings by their agreement with their neighbours, move buildings into new neighbourhoods with their pixels unchanged, and diagnose nine models covering the main paradigms of BDA. All models miss a third to half of the isolated damaged buildings, and in non-flood events they call 73--87% of intact buildings damaged once these are moved into a damaged neighbourhood. We propose a building-evidence plug-in that adds two experts to an existing model without retraining it. One expert sees only the building, and the other sees its surroundings but is trained with seamlessly swapped neighbourhoods so that it learns not to trust them. With each of the nine models, the plug-in maintains or improves overall accuracy, reduces errors on buildings that disagree with their neighbours by 8--18%, and cuts by 40--69% the intact buildings that a damaged neighbourhood turns into damaged ones. It also raises the detection of synthetic isolated damage from 1--6% to 13--39% and carries over to optical--SAR data and to an unseen earthquake. High overall scores thus conceal a systematic reliance on the neighbourhood, which building-level evidence reduces at low cost.

0.27

Shortcut Learning in Geospatial Foundation Model Embeddings for Cross-Disaster Damage Assessment

cs.CV cs.LG ·2026-10-09 ·Ali Shibli, Andrea Nascetti, Yifang Ban
publishedcode/data similarity 0.65
Abstract · NeurIPS REO Workshop 2026

Geospatial foundation models can support disaster damage assessment, but high accuracy on familiar disasters may hide shortcut learning: prediction from event or scene characteristics rather than evidence that transfers to a new disaster. We study embeddings from TerraMind, Prithvi-EO-2.0, DOFA, and DINOv3 on the multi-disaster datasets xView2 and BRIGHT. Holding out an entire disaster, instead of randomly splitting image tiles, reduces mean balanced accuracy from 0.807 to 0.638 on xView2 and from 0.818 to 0.568 on BRIGHT. Four sets of tests examine what information supports prediction: event and acquisition context, before/after image inputs, building count, and correct image pairing. Pre-event images remain predictive, and a classifier given only the annotated number of buildings reaches balanced accuracy of 0.629 and 0.653. Combining before/after features performs best on average on xView2, but does not improve over pre-only features on BRIGHT. Shuffling image pairs within the same disaster and damage class causes modest losses. Motivated by these findings, we test whether feature transformations learned only from training disasters improve generalization to unseen disasters. These transformations improve performance, with supervised contrastive learning performing best on xView2 and PCA on BRIGHT. Our results highlight the importance of evaluation on unseen domains for assessing model robustness and show that simple feature-level transformations can improve generalization. Code and experiments can be found at https://github.com/alishibli97/gfm-shortcut-learning.

0.51

Looks Can be Deceiving: Annotator and Reviewer Performance Across Imagery Sources in Crowd-Sourced Aerial Damage Assessment

cs.CV cs.AI ·2026-08-14 ·Thomas Manzini, Priyankari Perali, Raisa Karnik, Stephen Johnson, Robin R. Murphy
published similarity 0.62
Abstract · Accepted ACM HCOMP'26. 13 pages, 6 figures

This paper presents the first known empirical investigation of annotator and reviewer performance across multi-source remotely sensed imagery, evaluating human labeling across drone, crewed aviation, and satellite views. Because existing aerial imagery datasets rely predominantly on single-source imagery, there is no currently established state of practice for efficiently allocating human labor to curate large-scale, multi-source aerial datasets. This work addresses this limitation by analyzing annotator and reviewer performance within a post-disaster building damage assessment dataset of 9 disasters, where 20041 buildings in drone, 20695 buildings in crewed aviation, and 33392 buildings in satellite imagery were labeled. These labels, provided by 187 annotators, were then refined through two successive quality-control stages: a single-reviewer pass followed by a consensus-committee review. Our analysis reveals two findings that raise questions for standard crowd-sourcing practices. First, initial annotations were revised by the final committee at rates that rise steeply from higher- to lower-resolution sources (25.27% for crewed aviation and 36.95% for satellite), with the same ordering at every observed workflow stage. Second, a single individual review reduced but did not resolve this disagreement: after review, the committee still revised 6.85% of drone, 14.05% of crewed, and 20.86% of satellite labels. These observations suggest that, in workflows like this one, uniform review allocation leaves the most residual disagreement in lower-resolution imagery. Based on this evidence, and consistent with prior work on adaptive task assignment and budget-aware quality control, this paper offers three recommendations for multi-source dataset curation.

0.28

When Satellite and Street Views Disagree: Cross-View Complementarity in Disaster Damage Assessment

cs.CV ·2026-10-03 ·Yifan Yang, Lei Zou
published similarity 0.62
Abstract · 4 pages, 3 figures; Accepted for publication in the proceedings of the 5th ACM SIGSPATIAL International Workshop on Searching and Mining Lar…

Satellite and street-view imagery see different parts of a damaged building: roofs from above, facades and debris from the ground. Average accuracy hides whether fusion methods use this complementary evidence. We study the conflict cases, the samples on which independently trained single-view models disagree, as a diagnostic subset. On paired collections from the 2025 Eaton wildfire and Hurricanes Ian and Milton, conflicts make up 9.6-33.2% of the test data. Fusion improves conflict accuracy over either view, yet an oracle that selects the correct single view per conflict remains 0.19-0.32 above the best evaluated fusion method. A linear fusion gate over building-visibility features, calibrated confidences, and disagreement recovers part of this headroom where ground photographs are aimed at the building: on Eaton it beats end-to-end fusion by +0.072 conflict accuracy p < 10^-4 and calibrated averaging by +0.051 p = 0.0001; on the panoramic hurricane datasets it is indistinguishable from end-to-end fusion. Cropping panoramas toward the building raises the conflict gain of fusion, whereas random crops of the same size do not. The spatial density of conflicts, computed without labels, correlates with tile-level wildfire damage Spearman r = 0.615, 25 tiles. Conflict cases thus show how much complementary evidence fusion uses, which view it carries under each hazard and capture setting, and where current methods fall short.

0.48

Recognition of Urbanized Areas in UAV-Derived Very-High-Resolution Visible-Light Imagery

cs.CV ·2026-09-30 ·Edyta Puniach, Wojciech Gruszczyński, Paweł Ćwiąkała, Katarzyna Strząbała, Elżbieta Pastucha
publishedhighly cited similarity 0.61
Abstract

This study compared classifiers that differentiate between urbanized and non-urbanized areas based on unmanned aerial vehicle (UAV)-acquired RGB imagery. The tested solutions in-cluded numerous vegetation indices (VIs) thresholding and neural networks (NNs). The analysis was conducted for two study areas for which surveys were carried out using different UAVs and cameras. The ground sampling distances for the study areas were 10 mm and 15 mm, respectively. Reference classification was performed manually, obtaining approximately 24 million classified pix-els for the first area and approximately 3.8 million for the second. This research study included an analysis of the impact of the season on the threshold values for the tested VIs and the impact of image patch size provided as inputs for the NNs on classification accuracy. The results of the con-ducted research study indicate a higher classification accuracy using NNs (about 96%) compared with the best of the tested VIs, i.e., Excess Blue (about 87%). Due to the highly imbalanced nature of the used datasets (non-urbanized areas constitute approximately 87% of the total datasets), the Mat-thews correlation coefficient was also used to assess the correctness of the classification. The analysis based on statistical measures was supplemented with a qualitative assessment of the classification results, which allowed the identification of the most important sources of differences in classification between VIs thresholding and NNs.

0.63

TileNet: Tile-Based CNN-SVM Architecture for Autonomous Unmanned Aerial Systems Inspection of Flat Roofs

cs.CV cs.AI ·2026-09-11 ·Samuel Dunthorne, Hashim A. Hashim
published similarity 0.61
Abstract · Journal of Safety Science and Resilience

Flat roofs are among the most influential components of the building envelope, governing both structural performance and thermal efficiency, and thereby contributing directly to household energy consumption, carbon emissions, and long-term environmental sustainability. Timely detection of roof defects is essential for reducing heating and cooling losses, preventing moisture-driven degradation such as mold growth, and supporting national climate-change mitigation goals. This paper presents a real-time, Unmanned Aerial System (UAS)-based deep learning framework that autonomously detects defects using live imagery captured during dual-altitude aerial passes. The multi-resolution flight strategy is designed to aid the identification of both small, fine-scale defects and larger structural issues, enabling more comprehensive assessments. To meet the strict computational and power constraints of embedded UAS hardware, the proposed framework integrates a tile-based architecture with a lightweight Convolution Neural Network-Support Vector Machine (CNN-SVM) classifier designed for low-latency onboard inference. The final model-comprising five convolutional layers and four dense layers, the last a linear SVM head, achieved a mean test accuracy of $94.4\%$ ($95\%$ confidence interval $\pm0.4\%$ over three seeds) on a photo-level split ($43,383$ training, $3,869$ validation, and $2,540$ test tiled and augmented images), outperforming GoogLeNet ($89.2\%$) and AlexNet ($79.8\%$). Experimental evaluations using real UAS imagery collected by onsite visits with DJI Matrice 350 RTK drone demonstrate that the system supports rapid, repeatable, and safe roof inspections while reducing human risk, lowering operational costs, and enabling more sustainable building maintenance.

0.64

Deep Learning for Satellite-Based Mountain Hazard Screening: A Retrospective Failure Analysis on the 2021 Chamoli Rock-Ice Avalanche

cs.CV ·2026-11-16 ·Snigdhajyoti Rakshit
similarity 0.59
Abstract · 27 pages, 10 figures, 8 tables

The approach utilizes 10 bands from Sentinel-2 imagery, along with terrain information, in a deep learning pipeline to classify potential hazard sources in any given mountainous region. The performance of our model has been evaluated against the data collected during the rock-ice avalanche event in the Chamoli region in the Indian Himalayas on 7th February 2021. U-Net performs segmentation of the detected land surface in the satellite image, detects changes in the identify candidate hazard zones, and then the following steps are performed to calculate the potential energy using the Monte Carlo sampling for steepest descent (D8) flow paths, finding the exposed structures in the downstream locations, and ranking the zones depending on the risk score. In comparison to the simple spectral rule, our approach achieved the higher macro F1 score of 0.648 (as compared to 0.519). But the F1 score in case of rock and soil was low, being in the range of 0.3s. In case of optical change detection in winter, it's only that northeast-facing slope which couldn't be detected, as it was under 73% of shade prior to the incident. The parameters have been set for this particular scene alone and not independently; hence, this is a retrospective test, and this test locates a failure which has occurred earlier. The primary contribution of this paper is locating the pipeline leak.

0.24