CS Paper Radar

Rapid Loss of the Sierra Nevada's Largest Trees Driven by Fire

Fabien H. Wagner, Dan J. Dixon, Christopher W. Woodall, Mayumi C. M. Hirye, Felipe Saad, Griffin Carter, Ricardo Dalagnol, Lorena Alves, Cynthia Creze, Stephen C. Hagen, Zhihua Liu, Christopher Mihiar, Adugna Mullissa, Le Bienfaiteur Sagang Takougoum, Bryan Shaddy, Yan Yang, Dafeng Zhang, Sassan Saatchi

cs.CV ·submitted 2026-09-15 23:33 UTC · v1

Abstract

Large trees disproportionately contribute to biomass storage, habitat structure, and ecosystem functioning. However, their distribution and health dynamics remain poorly quantified at a regional scale. Here, a deep learning model (U-Net-ID) and canopy height models derived from sub-meter aerial imagery from 2020 were used to delineate all individual trees with crown area $\geq$ 100 m$^2$ across the Sierra Nevada Floristic Province. The model was trained using more than 3.3 million synthetic tree crowns and achieved a median Intersection over Union (IoU) of 0.602 when validated against an independent dataset of 20,273 crowns. A total of 6,515,705 large trees were mapped, occurring across approximately 78.7% of the Sierra Nevada Floristic Province. The spatial distribution of large trees showed associations with elevation, temperature, and precipitation. Using Sentinel-2 time series from 2020 to 2025, tree health dynamics were characterized by extracting spectral trajectories for each crown and applying BFAST breakpoint detection algorithm combined with a disturbance classification framework to identify mortality, disturbance, and recovery trajectories of individual trees. Wildfires, estimated from CAL FIRE fire perimeters, were identified as the dominant driver of large-tree mortality, killing 10% of all large trees in the Sierra Nevada, with mortality strongly concentrated during the extreme 2020-2021 fire seasons.

Comment
40 pages, 13 figures

Closest papers

Nearest neighbours by meaning across the whole index.

From crown candidates to neighborhood screening: integrating optical GeoAI and spatial modeling for urban-canopy assessment in Davis, California

eess.IV cs.CVstat.AP ·2026-08-14 ·Mohammadreza Narimani, Shreyan Mitra, Parastoo Farajpoor
code/datahighly cited similarity 0.65
Abstract · 17 pages, 10 figures + 5 supplementary figures, 7 tables. Revised preprint (expanded canopy infill; IoU 0.719). Preprint submitted to Taylor…

Timely urban-canopy information is essential for linking remote sensing with heat, mobility, and neighborhood planning. We developed an optical GeoAI workflow for Davis, California, using 2022 National Agriculture Imagery Program imagery (0.6 m RGB+NIR). DeepForest generated crown candidates; an NDVI threshold, non-maximum suppression, and box-prompted Segment Anything Model (ViT-B) produced a crown-anchored canopy surface. Analyses used the 25.92 km2 Census TIGER municipal boundary and a 100 m grid. The workflow retained 11,741 candidate crowns and mapped 7.71 km2 of canopy (29.8% of the city). On the identical extent, pixel precision was 0.804, pixel recall was 0.873, and 97.4% of candidate centers agreed with the 2022 USDA/CAL FIRE LiDAR-assisted canopy product (IoU 0.719; Dice 0.837; area recovery 108.5%). Approximately 49% of candidates occurred within 15 m of a road. Canopy was inversely associated with Landsat land-surface temperature (Spearman rho = -0.477; partial rho = -0.551 controlling for built probability), and spatial-lag modeling confirmed clear neighborhood structure. Two transparent attention surfaces combined canopy need with thermal and contextual indicators. The framework provides a reproducible, updateable screening layer that complements structural canopy products and municipal inventories while retaining assumptions, data provenance, and spatial diagnostics for planning interpretation.

0.70

National-scale mapping of tree species composition in Switzerland from high-resolution aerial imagery and multimodal data

cs.CV ·2026-11-05 ·Yixin Zhou, Luca Ferrari, Verena C. Griess, Nataliia Rehush, Konrad Schindler +1 more
similarity 0.64
Abstract · 39 pages, 17 figures (11 in the main text, 6 in the supplementary material). Submitted to Remote Sensing of Environment

Tree-species composition shapes forest productivity and how forests respond to climate disturbances such as drought, windthrow and insect outbreaks. Yet most national forest maps assign each pixel a single dominant species and cannot show the share of accompanying species. We mapped the basal-area shares of ten main tree species and a residual Other class across Switzerland at 30 m resolution. A deep-learning model combining 0.1 m aerial RGB imagery, airborne laser scanning (ALS), annual AlphaEarth satellite embeddings, and climate variables was trained on basal-area observations from 3,992 Swiss National Forest Inventory (NFI) sites. In spatial cross-validation, the model reached a macro-$R^2$ of 0.485 across the 11 classes. On an independent forest-reserve dataset, the map reached a macro-$R^2$ of 0.552 for individual 30 m pixels and 0.733 for plots, and identified the dominant class in 73.2% of pixels and 81.1% of plots. The map shows maple and ash as widespread minor components that dominant-class maps omit. It also reproduces the elevational sequence from broadleaved lowland stands through spruce to larch and Arolla pine near the treeline. By resolving the species mixture within each 30 m pixel, the map complements field inventory statistics with spatially continuous information that can support forest monitoring, the management of mixed stands, and climate-adaptation planning across Switzerland.

0.22

Exploring Interpretability in Deep Learning-Based Forest Classification - Separating Similar Forest Classes using Sentinel-2 Time Series

cs.LG cs.AI ·2026-10-13 ·Maximilian Kirsch, Christine Preisach
similarity 0.64
Abstract

The ecological insurance theory posits that diverse forests are more resilient and better able to adapt to changing environmental conditions. Increasing drought and heat stress in Central Europe promotes mixed forests for maintaining ecosystem services. However, a diverse species distribution complicates remote sensing-based species mapping, as distinguishing pure from mixed species compositions at the pixel level remains challenging. We evaluated the potential of recurrent neural networks (RNNs) for tree-species classification from Sentinel-2 time series and investigated the spectral-temporal features underlying class discrimination, with particular emphasis on separating pure from mixed Norway spruce pixels. We compared RNN classification models with Random Forest (RF) and Extreme Gradient Boosting (XGBoost) and used Integrated Gradients (IG) to quantify feature attributions across spectral bands and time. The best-performing RNN achieved a Macro-F1 score of 0.851 on the test data, outperforming XGBoost by 0.012 and Random Forest by 0.103. Beyond classification performance, the attribution analysis revealed distinct spectral-temporal patterns associated with the separation of pure and mixed Norway spruce pixels. Attribution values increased particularly after approximately day of year (DOY) 125, while B11 showed the strongest contribution during periods of increasing spectral divergence between the two classes. These findings show that recurrent models can provide competitive classification performance while also revealing the phenological periods and spectral regions that are most relevant for distinguishing closely related forest compositions. Combining time-series classification with explainability therefore provides additional insight into the spectral-temporal mechanisms underlying tree-species discrimination and may support more detailed mapping of mixed forest structures.

0.05

Tree species mapping in Denmark: A comparison of spectral-temporal features with geospatial foundation model embeddings

cs.CV cs.AIcs.LG ·2026-09-03 ·Alkiviadis Koukos, Spyros Kondylatos, Thomas Nord-Larsen, Lotte Nyborg, Christian Tøttrup +1 more
code/data similarity 0.64
Abstract · This preprint presents a national-scale tree species mapping framework for Denmark using Sentinel-1/2 time series, National Forest Inventory…

We map tree species across Denmark using National Forest Inventory plots and EO data, while evaluating the potential of foundation models for large-scale forest characterization. We compare two alternative input representations for tree species classification: (i) manually engineered spectral-temporal features (STF) derived from multi-temporal Sentinel-1 and Sentinel-2 observations, and (ii) embeddings generated by the EO FMs TESSERA and AlphaEarth. Both representations are complemented with canopy height information. Random forest, XGBoost, and Multi-Layer Perceptron (MLP) classifiers are evaluated for all input representations, with separate assessments for pure and mixed forest stands. The STF-based MLP achieves the highest classification performance, yielding macro F1 scores of 0.843 and 0.653 for pure and mixed stands, respectively. The MLP trained on TESSERA embeddings delivers competitive performance for pure stands, achieving results within 1.1 percentage points of the best-performing model. TESSERA consistently outperforms STF-based models when fewer than approximately 25% of training plots are available, demonstrating a substantial advantage under limited training data. Multi-year observations systematically improve classification accuracy relative to single-year inputs, while ablation experiments reveal the complementary contributions of Sentinel-1 backscatter, spectral indices, and canopy height data. The best-performing model is subsequently applied at the national scale to generate a 10 m tree species map of Denmark. Area-adjusted validation indicates an overall map accuracy of 79.9%. The resulting map, released as an open-access product, is the first high-resolution national tree species map of Denmark and provides a valuable resource for forest monitoring, ecological research, and land management applications.

0.30

DailyWildfireCAN: A Dataset and Benchmark for Next-Day Wildfire Spread Prediction in Canada

cs.CV ·2026-11-10 ·Mahacine Ettahri, Hager Radi Abdelwahed, Toluwaleke Olutayo, Daniel Aloise, Gaétan Marceau Caron
benchmark similarity 0.63
Abstract

Wildfires represent a critical ecological and socio-economic challenge in Canada, where vast boreal forests and a warming climate have amplified the frequency and severity of extreme fire seasons. Predicting next-day wildfire spread can support fire management, but requires capturing complex interactions among weather, fuels, and terrain. Deep learning has emerged as a promising approach to learning these relationships from heterogeneous environmental data, yet its development and evaluation depend on representative datasets. Existing deep learning research on wildfire spread relies predominantly on US-focused datasets, leaving Canadian fire environments underrepresented. To address this gap, we present DailyWildfireCAN, a multi-modal, multi-temporal dataset and benchmark for predicting next-day wildfire spread across Canada. The dataset tracks continuous fire progression over multi-day events at a high spatial and temporal resolution of 90-m and 24-hour, respectively. This resolution preserves fine-scale information relevant to fire-edge geometry, local fuel variations, and terrain effects, supporting research toward improved daily wildfire spread forecasting. DailyWildfireCAN covers 2,440 wildfire events across eight fire seasons 2017-2024 and integrates 33 features across diverse modalities, including topography, meteorology, land cover, vegetation and forest structure, human influence indices, and satellite imagery. We establish a comprehensive benchmark comparing mono-temporal and multi-temporal prediction models, accompanied by a multi-dimensional evaluation framework assessing robustness across wildfire characteristics, geographic regions, and temporal conditions, spatial prediction quality, and sensitivity to reference label variations.

0.15

Sparse tensor networks for individual tree diameter estimation in mixed forests

cs.CV ·2026-10-27 ·Clara Lößl, Fabian Ewald Fassnacht, Viacheslav Barkov
similarity 0.62
Abstract

Measurements of tree diameter at breast height (DBH) are fundamental to forest inventories, but manual surveys across entire stands or regions are impractical. UAV-borne laser scanning (ULS) enables scalable automated forest surveys, yet canopy occlusion makes accurate DBH estimation from ULS point clouds non-trivial. Limited stem-level point density of ULS data constrains approaches relying on detailed stem reconstruction, such as Quantitative Structure Models (QSMs) and circle fitting. Empirical machine learning methods based on predefined point cloud metrics are an alternative. New deep learning approaches offer an even more principled solution, allowing models to learn directly from point clouds. Sparse tensor networks have shown particular promise, transforming forestry tasks such as tree species classification. We investigate whether these strengths can be extended to estimate individual tree DBH from ULS data across four mixed-species temperate forest plots in Germany. We further advance existing sparse tensor networks by introducing TreeNext, a lightweight deep learning architecture for direct individual tree parameter estimation from voxelized LiDAR point clouds. We present a fully automated forest inventory pipeline from individual tree instance segmentation to DBH regression, and quantify the impact of segmentation errors by comparing performance on automatically segmented and ground truth instances. TreeNext achieves an $R^2$ of 0.8355 on automatically segmented trees and 0.9380 on ground truth segments, outperforming strong tabular baselines including Random Forest and XGBoost. Segmentation quality emerges as the dominant error source in the automated pipeline. TreeNext proves highly data-efficient, performing well even in small data scenarios. Our findings establish sparse tensor networks as a practical foundation for automated individual tree DBH estimation from ULS.

0.20

Detection of Christmas tree plantations from high-resolution aerial imagery. A case study in the French Morvan

cs.CV ·2026-08-27 ·Francesca Razzano, Emanuele Dalsasso, Adrien Baysse-Lainé, Silvia Liberata Ullo, Gilda Schirinzi +1 more
similarity 0.61
Abstract · 18 pages, 9 figures. Submitted to IEEE JSTARS; currently under revision

Christmas tree plantations are economically relevant, yet a largely unexplored application domain in Remote Sensing (RS). Their delineation is challenging because of high planting density, short rotation cycles, visual confusion with surrounding vegetation, the availability of dense labels for one reference year only, and severe class imbalance at the landscape scale. Although Deep Learning (DL) methods have shown strong potential for vegetation mapping, existing approaches are typically designed for forests, generic plantation systems, or orchards, and do not explicitly address the structural specificity and hard-negative confusion that characterize Christmas tree plantations. In response to these challenges, this work makes three main contributions: (i) it frames Christmas tree plantation mapping as a distinct rare-target semantic segmentation problem; (ii) it introduces a Hard Negative Mining (HNM) strategy to improve discrimination against confusing background patterns; and (iii) it evaluates the proposed framework across complementary levels, including supervised testing, temporal transfer, and large-scale validation. On the 2020 test set held out, the best model, DeepLabV3 with a ResNet-34 encoder, achieves an IoU of 0.733 and an F1-score of 0.846. HNM substantially improves precision-recall behavior, increasing the area under the precision-recall curve from 0.204 to 0.913. Temporal inference further shows meaningful transferability, reaching IoU/F1 values of 0.751/0.858 on 2017/2018 and 0.691/0.817 on 2023. Large-scale validation further highlights the intrinsic difficulty of the task, as Christmas tree plantations occupied only a very small fraction of the extent of the common evaluation, corresponding to 1,498.4 ha (1.72\%) in 2017/2018 and 1,782.2 ha (2.04\%) in 2023 out of 87,309.4 ha in total.

0.10

Reliable Tree Recruitment from Scarce Annotations for Forest Inventory Expansion

cs.CV ·2026-11-18 ·Luiz Fernando Souza Luz, Pedro J. Soto Vega, Matheus Pinheiro Ferreira, Laura Elena Cué la Rosa, Hudson Franklin Pessoa Veras +13 more
similarity 0.61
Abstract · 20 pages, 15 figures

Species-level inventories of individual tree crowns (ITCs) from UAV imagery are limited by annotation cost: in tropical forests, many species are represented by only a handful of field-validated crowns. We propose a reliable tree recruitment framework that expands a small annotated inventory by iteratively self-training a multi-task DeepLabV3 network, combining semantic segmentation with a crown-distance regression head, on RGB UAV orthomosaics. At each iteration, candidate crowns enter the training inventory only if they pass a confidence filter on class probability and distance map and a morphology filter on crown area and solidity, with at most five new crowns per species, keeping recruited samples consistent with the reference inventory. We evaluate the framework at two Brazilian sites: an Amazonian rainforest in Acre (17 species, 355 annotated crowns, 4 cm GSD) and a forest site in the Cerrado of Maranhão (4 species, 51 annotated crowns, 1.8 cm GSD). Over 20 iterations, the number of retained crowns grew from about 500 to 960 in Acre and from about 700 to over 3100 in Maranhão, while crown-level F1 exceeded single- and multi-task DeepLabV3 baselines (53.5% vs. 50.0% and 45.2%; 92.2% vs. 79.7% and 83.6%). The framework offers a low-cost route to expanding species inventories with consumer-grade UAVs and limited fieldwork.

0.21