CS Paper Radar

Quasi-Single-Mode Transmission over Ultra-Low Loss Few-Mode Fibre for Data Centre Interconnects

Fabio A. Barbosa, Rostislav R. Khrapko, Ming-Jun Li, Filipe M. Ferreira

eess.SP ·submitted 2026-08-14 21:18 UTC · v1
published

Abstract

A novel ultra-low-loss few-mode fibre is experimentally investigated for quasi-single-mode transmission over data centre interconnect distances. Multipath interference is characterised across the C-band matching a modified Gaussian noise model to experimental results obtained with conventional training-sequence-based digital signal processing, enabling inservice assessment without traffic disruption. This model shows strong agreement with power-fluctuation measurements performed on a dedicated unmodulated-laser setup. The impact of equaliser length and digital backpropagation on system performance is also analysed. Compared with standard ultralow-loss single-mode fibres, transmission experiments reveal only minor signal-to-noise ratio degradation for up to 42-Gbaud DP-256-QAM over a 24-km span. These findings highlight the potential of ultra-low-loss few-mode fibre for scalable, highcapacity data centre interconnect applications while offering potential for future space-division multiplexing upgrades.

Comment
This article has been accepted for publication in IEEE Photonics Technology Letters. This is the author's version which has not been fully edited and content may change prior to final publication. Citation information: DOI 10.1109/LPT.2026.3659618

Closest papers

Nearest neighbours by meaning across the whole index.

When Less is More: Emerging Network-Wide Use Cases for Hollow-Core Fibers in Optical Networks [Invited]

cs.ET cs.NI ·2026-11-05 ·Mëmëdhe Ibrahimi, Giovanni Simone Sticca, Angelo Ferrara, Francesco Musumeci, Massimo Tornatore
similarity 0.52
Abstract

Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering 30\% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0.05-0.1 dB/km), and nonlinearities reduced by three to four orders of magnitude. While the physical-layer benefits of HCF have been extensively demonstrated, recent industrial commitments by hyperscalers (e.g., Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call for a systematic assessment of the impact of HCF at the network level. Building on a series of prior contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energy-efficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission; and (iv) coexistence of classical and quantum (QKD) channels. Consolidated results across realistic metro, national, and continental topologies convey a unifying message: in each use case, a selective HCF upgrade captures a significant share of the achievable benefit compared to a network overhaul. The required HCF budget is use-case-specific, i.e., 6-24\% of the total network fiber length for edgeDC consolidation (up to 50\% fewer edgeDCs), 40\% of the network links for QKD/classical coexistence (up to 38\% fewer quantum modules), and 40-60\% of the network links for energy-efficient capacity scaling via BiDi-HCF (up to 28\% lower network power per Tbps and 70\% more served traffic, at half the HCF strand count of a unidirectional HCF upgrade), whereas for energy-efficient high-power amplification the gain keeps growing with the HCF budget (up to 60\% lower network power per Tbps at the national scale) and what saturates is the benefit of increasing the EDFA output power.

0.25

Energy-Efficient Hollow-Core Fibre Transmission

eess.SP ·2026-09-17 ·Ronit Sohanpal, Eric Sillekens, Mindaugas Jarmolovičius, Robert I. Killey, Polina Bayvel
similarity 0.51
Abstract

Hollow-core fibres (HCFs) are a promising means of increasing the throughput of coherent transmission systems. In addition to their advantages in terms of low latency, nonlinearity and attenuation, HCFs can potentially improve the energy efficiency of coherent transmission systems by reducing the number of repeaters and enabling more efficient modulation formats than SMF links. However, the relationship between the link parameters (e.g. launch power, amplifier efficiency and transceiver noise) and the energy efficiency has not been explored. In this work, we investigate energy-efficient operating regimes in HCF transmission systems. We show that the optimum energy per bit in SMF systems is ultimately throughput-limited - maximising throughput will minimise energy per bit. In contrast, the transceiver-limited throughput of HCF leads to two separate launch power optima - minimum-energy-per-bit and maximum-throughput. We derive a closed-form equation for the minimum-energy-per-bit launch power for HCF links in terms of the link parameters, including the amplifier efficiency, transceiver power consumption and link gain. We use our model to explore the impact of span length and fibre attenuation in both operating regimes, showing how energy per bit considerations significantly impact the optimum span length. Optimising for energy efficiency can lead to 50% reduction in link energy per bit for only a 3% throughput penalty at 3000 km, whilst also reducing the required amplifier launch power from >33 dBm to <23 dBm. This work highlights the importance of including physical layer energy considerations in HCF link design.

0.23

Distributed Fiber Monitoring on a Coherent DSP ASIC: Implementation of Longitudinal Power Monitoring

eess.SP physics.optics ·2026-11-19 ·Takeo Sasai, Yukinobu Nakajima, Minami Takahashi, Runa Kaneko, Masanori Nakamura +3 more
similarity 0.50
Abstract · 11 pages, 19 figures

Coherent DSP ASICs and transceivers to date report a rich set of optical link metrics, yet these remain cumulative over the link and provide no spatial localization. This paper presents the implementation design of fiber-longitudinal power monitoring (LPM), which recovers spatially resolved power profiles from received traffic, on a coherent DSP ASIC chip. We first identify the challenges specific to DSP implementation, and describe the enabling algorithm and architecture. We then present the key design considerations for retaining the estimation fidelity of the on-chip LPM during in-service operation. On this basis, we implement LPM on a coherent DSP, a 3-nm 800G low-power DSP ASIC housed in an OSFP pluggable module, which constitutes, to our knowledge, the first coherent DSP ASIC and transceiver to perform distributed fiber monitoring and data communication simultaneously. The on-chip LPM is experimentally validated over links of up to 1005 km using 400ZR+ and 800ZR+ traffic, with no measurable impact on Q factor or module power consumption. Multi-vendor interoperability is also demonstrated, where the on-chip LPM operates on signals transmitted by third-party transceivers. These results extend coherent DSPs from cumulative to spatially resolved monitoring, allowing pluggable transceivers, deployable from DCI to long-haul, to act not only as cost-efficient transmission elements but also as distributed monitoring points across diverse optical network infrastructure.

0.31

OMRC: Multipath Reliability for Direct-Connect Optical Interconnects

cs.NI ·2026-10-22 ·Eric Ding, Keshav Pradeep, Rachee Singh
similarity 0.47
Abstract

Network failures degrade Multipath Reliable Connection (MRC) in direct-connect optical datacenters. We propose Optical MRC (OMRC), which remaps collectives and circuits, preserving 95.7% of training throughput, restoring stalled inference, and achieving 4.7x MRC's simulated bandwidth.

0.27

Link-adaptive digital twin for robust physical-layer modeling in hybrid-amplified ultra-wideband optical networks

cs.NI cs.LGphysics.data-anphysics.optics ·2026-08-11 ·Xiaoxuan Gao, Rentao Gu, Yingchun Wang, Xinyi Liu, Junshi Gao +1 more
published similarity 0.47
Abstract

Accurate physical-layer modeling is increasingly essential for reliable ultra-wideband operation and capacity optimization, especially under the intensified inter-channel stimulated Raman scattering (ISRS) effect. This paper proposes the link-adaptive digital twin (LA-DT) for hybrid-amplified ultra-wideband links to overcome the generalization and speed limitations of existing methods, achieving accurate modeling and robust generalized signal-to-noise ratio (GSNR) estimation across diverse links. First, to address EDFA heterogeneity, the GSNR modeling task is decomposed into three key power predictions: ASE, NLI, and signal powers before EDFA entry. Second, to enhance cross-scenario generalization, three dedicated DT models are developed using a novel neural architecture with linear modulation layers (LMLs). Third, for rapid adaptation to unseen scenarios with limited data, three domain discriminators guide few-shot fine-tuning of the LMLs. Fourth, the LA-DT explicitly accounts for Raman amplifier (RA) insertion loss, improving practical deployment reliability. Results across 35 scenarios show that LA-DT reduces RMSE for NLI, ASE, and signal power predictions to 0.151, 0.111, and 0.113 dBm with improvements of 56.0%, 58.4%, and 52.7% over the baseline,and achieves an average GSNR estimation RMSE of 0.114 dBm (55.8% improvement). For 12 unseen scenarios, the LA-DT maintains high accuracy through few-shot fine-tuning with only 20 samples per scenario, achieving an average GSNR RMSE of 0.159 dB and demonstrating strong adaptability and robustness.

0.27

A Continuous Payload-Bearing Discrete Multitone Modulation Framework for Fiber-Optic Integrated Sensing and Communication

eess.SP ·2026-08-29 ·Huan Huang, Ziang Chen, Zhiyang Xue, Dongdong Zou, Yi Cai
similarity 0.44
Abstract · This manuscript has been submitted for consideration for publication

A key challenge in fiber-optic integrated sensing and communication (ISAC) is to make the payload-bearing waveform itself serve both functions without a separate sensing waveform or sensing-only silent interval. We propose a continuous discrete multitone (DMT) framework with two waveform modes, in which the same payload-bearing waveform supports forward intensity-modulation/direct-detection (IM/DD) communication and backward distributed acoustic sensing (DAS). A unified phase-sensitive optical time-domain reflectometry (φ-OTDR) model represents distributed Rayleigh backscattering as a finite-memory sensing multipath channel. It shows that conventional pulse-and-wait φ-OTDR requires a round-trip-time-scale silent interval to isolate successive returns, while nonzero off-peak samples in practical matched-filter (MF) pulse compression cause spatial intersymbol interference (ISI). Continuous DMT instead retains superposed returns and separates range-cell contributions through known-waveform channel reconstruction. Cyclic-prefix DMT (CP-DMT) uses a full-memory CP and one-tap frequency-domain equalization (FDE); under sufficient-CP and ideal full-bin inversion conditions, it eliminates MF-correlation-induced spatial ISI. Cyclic-prefix-free DMT (NoCP-DMT) applies regularized least squares (LS) to the long-memory linear convolution, avoiding the CP at higher receiver complexity. Experiments over a 10-km fiber link localize a 600-Hz disturbance applied by a piezoelectric transducer (PZT) near 5.071 km and recover gauge-differential phase with correlations of 0.989 and 0.987 for CP-DMT and NoCP-DMT, respectively. At 2- and 1-V PZT drive levels, the ten-record localization standard deviations are 0.16/0.11 m and 0.18/0.38 m, respectively. The corresponding IM/DD error vector magnitude values range from 4.80% to 5.00%, with no bit errors observed.

0.50

Proximal-Only Transmission Matrix Recovery of an Arbitrarily Deformed Graded-Index Multimode Fiber

cs.CV physics.optics ·2026-09-14 ·Cole Reynolds
unusual similarity 0.44
Abstract

The multimode fiber is among the thinnest imaging conduits available, carrying hundreds to thousands of spatial modes through a cross-section comparable to a human hair, but its endoscopic capabilities are currently limited by the sensitivity of the transmission matrix to the fiber's deformed state. Proximal-only recovery of the fiber's transmission matrix is an appealing approach for enabling general use multimode fiber endoscopy, and within the last decade, machine learning techniques have been applied to both single-ended and double-ended transmission matrix recovery tasks. We present a new approach to this interdisciplinary problem and show that neural networks can generalize to recover transmission matrices of an arbitrarily deformed graded-index multimode fiber from proximal measurements alone.

0.29

End-to-End Optical Semantic Communication over a Nonlinear WDM Fiber Link

eess.SP cs.ITcs.LG ·2026-09-29 ·Hussein Jammal, Andrea Bianco, Cristina Rottondi
similarity 0.44
Abstract · 6 Pages

Emerging optical-network applications increasingly use received data for inference and control rather than exact source reproduction, creating an opportunity to trade bit-level fidelity for greater transmission reach and efficiency. We propose an end-to-end optical semantic communication system for joint image classification and reconstruction over a nonlinear wavelength-division multiplexed (WDM) fiber channel. The system maps each image directly into a fixed-length sequence of channel symbols that preserves task-relevant information, without explicit source compression or channel coding. Experiments on the MNIST dataset cover launch powers from -9 to +3 dBm, fiber lengths up to 800 km, and 16-, 64-, and 256-Quadrature Amplitude Modulation (QAM) formats. At 0 dBm, classification accuracy remains between 98.92% and 99.31% across all tested link lengths and modulation orders, while requiring fewer transmitted symbols than a Low-Density Parity-Check (LDPC)-coded JPEG baseline at every tested modulation order. These results show that semantic communication can simultaneously extend optical reach and reduce transmission resources by conveying only task-relevant information.

0.26