CS Paper Radar

Energy-Efficient Hollow-Core Fibre Transmission

Ronit Sohanpal, Eric Sillekens, Mindaugas Jarmolovičius, Robert I. Killey, Polina Bayvel

eess.SP ·submitted 2026-09-17 13:36 UTC · v1

Abstract

Hollow-core fibres (HCFs) are a promising means of increasing the throughput of coherent transmission systems. In addition to their advantages in terms of low latency, nonlinearity and attenuation, HCFs can potentially improve the energy efficiency of coherent transmission systems by reducing the number of repeaters and enabling more efficient modulation formats than SMF links. However, the relationship between the link parameters (e.g. launch power, amplifier efficiency and transceiver noise) and the energy efficiency has not been explored. In this work, we investigate energy-efficient operating regimes in HCF transmission systems. We show that the optimum energy per bit in SMF systems is ultimately throughput-limited - maximising throughput will minimise energy per bit. In contrast, the transceiver-limited throughput of HCF leads to two separate launch power optima - minimum-energy-per-bit and maximum-throughput. We derive a closed-form equation for the minimum-energy-per-bit launch power for HCF links in terms of the link parameters, including the amplifier efficiency, transceiver power consumption and link gain. We use our model to explore the impact of span length and fibre attenuation in both operating regimes, showing how energy per bit considerations significantly impact the optimum span length. Optimising for energy efficiency can lead to 50% reduction in link energy per bit for only a 3% throughput penalty at 3000 km, whilst also reducing the required amplifier launch power from >33 dBm to <23 dBm. This work highlights the importance of including physical layer energy considerations in HCF link design.

Closest papers

Nearest neighbours by meaning across the whole index.

When Less is More: Emerging Network-Wide Use Cases for Hollow-Core Fibers in Optical Networks [Invited]

cs.ET cs.NI ·2026-11-05 ·Mëmëdhe Ibrahimi, Giovanni Simone Sticca, Angelo Ferrara, Francesco Musumeci, Massimo Tornatore
similarity 0.59
Abstract

Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering 30\% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0.05-0.1 dB/km), and nonlinearities reduced by three to four orders of magnitude. While the physical-layer benefits of HCF have been extensively demonstrated, recent industrial commitments by hyperscalers (e.g., Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call for a systematic assessment of the impact of HCF at the network level. Building on a series of prior contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energy-efficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission; and (iv) coexistence of classical and quantum (QKD) channels. Consolidated results across realistic metro, national, and continental topologies convey a unifying message: in each use case, a selective HCF upgrade captures a significant share of the achievable benefit compared to a network overhaul. The required HCF budget is use-case-specific, i.e., 6-24\% of the total network fiber length for edgeDC consolidation (up to 50\% fewer edgeDCs), 40\% of the network links for QKD/classical coexistence (up to 38\% fewer quantum modules), and 40-60\% of the network links for energy-efficient capacity scaling via BiDi-HCF (up to 28\% lower network power per Tbps and 70\% more served traffic, at half the HCF strand count of a unidirectional HCF upgrade), whereas for energy-efficient high-power amplification the gain keeps growing with the HCF budget (up to 60\% lower network power per Tbps at the national scale) and what saturates is the benefit of increasing the EDFA output power.

0.25

Realistic modeling of Photonic Terahertz Communication based on a real-world 30 km 30 Gbps experimental demonstration

eess.SP ·2026-09-26 ·Mingxu Wang, Jianjun Yu, Xianming Zhao, Jiali Chen, Ye Zhou +7 more
publishedbenchmark similarity 0.51
Abstract · 15 pages, 10 figures

Experimental studies have demonstrated that THz links can support multi-kilometer, gigabit-per-second wireless transmission. However, few studies have effectively validated channel models through high-capacity, long-distance experiments. In this work, we experimentally demonstrate a 30 km ultra-long-haul photonic THz wireless communication system. 16 Gbaud quadrature phase shift keying (QPSK) signals are transmitted and tested, achieving a maximum data rate of 30 Gbps. For the first time, we validate two widely used THz channel models using a fully implemented 30 km experimental setup, providing a systematic and thorough analysis that integrates theoretical modeling with experimental results. We also perform an analysis of power consumption in photonic THz communication systems and provide a detailed comparison between simulated and experimental power consumption results. Finally, a detailed performance comparison between the simulation and experimental results, including signal-to-noise ratio (SNR), bit error rate (BER) and data rate, are provided. Our work provides essential insights for the design and energy-efficient deployment of future high-capacity THz networks, establishing a benchmark for subsequent research in channel modeling, experimental verification, and system-level energy efficiency.

0.34

Quasi-Single-Mode Transmission over Ultra-Low Loss Few-Mode Fibre for Data Centre Interconnects

eess.SP ·2026-08-14 ·Fabio A. Barbosa, Rostislav R. Khrapko, Ming-Jun Li, Filipe M. Ferreira
published similarity 0.51
Abstract · This article has been accepted for publication in IEEE Photonics Technology Letters. This is the author's version which has not been fully e…

A novel ultra-low-loss few-mode fibre is experimentally investigated for quasi-single-mode transmission over data centre interconnect distances. Multipath interference is characterised across the C-band matching a modified Gaussian noise model to experimental results obtained with conventional training-sequence-based digital signal processing, enabling inservice assessment without traffic disruption. This model shows strong agreement with power-fluctuation measurements performed on a dedicated unmodulated-laser setup. The impact of equaliser length and digital backpropagation on system performance is also analysed. Compared with standard ultralow-loss single-mode fibres, transmission experiments reveal only minor signal-to-noise ratio degradation for up to 42-Gbaud DP-256-QAM over a 24-km span. These findings highlight the potential of ultra-low-loss few-mode fibre for scalable, highcapacity data centre interconnect applications while offering potential for future space-division multiplexing upgrades.

0.20

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.50
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.57

Distributed Fiber Monitoring on a Coherent DSP ASIC: Implementation of Longitudinal Power Monitoring

eess.SP physics.optics ·2026-11-19 ·Takeo Sasai, Yukinobu Nakajima, Minami Takahashi, Runa Kaneko, Masanori Nakamura +3 more
similarity 0.49
Abstract · 11 pages, 19 figures

Coherent DSP ASICs and transceivers to date report a rich set of optical link metrics, yet these remain cumulative over the link and provide no spatial localization. This paper presents the implementation design of fiber-longitudinal power monitoring (LPM), which recovers spatially resolved power profiles from received traffic, on a coherent DSP ASIC chip. We first identify the challenges specific to DSP implementation, and describe the enabling algorithm and architecture. We then present the key design considerations for retaining the estimation fidelity of the on-chip LPM during in-service operation. On this basis, we implement LPM on a coherent DSP, a 3-nm 800G low-power DSP ASIC housed in an OSFP pluggable module, which constitutes, to our knowledge, the first coherent DSP ASIC and transceiver to perform distributed fiber monitoring and data communication simultaneously. The on-chip LPM is experimentally validated over links of up to 1005 km using 400ZR+ and 800ZR+ traffic, with no measurable impact on Q factor or module power consumption. Multi-vendor interoperability is also demonstrated, where the on-chip LPM operates on signals transmitted by third-party transceivers. These results extend coherent DSPs from cumulative to spatially resolved monitoring, allowing pluggable transceivers, deployable from DCI to long-haul, to act not only as cost-efficient transmission elements but also as distributed monitoring points across diverse optical network infrastructure.

0.31

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.49
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.47
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

Information in Polarization, Energy from Optical Power: Stokes-Orthogonal Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Mazen O. Hasna, Khalid A. Qaraqe
similarity 0.47
Abstract

Joint information and energy transfer over inter satellite free space optical links is commonly based on explicit resource splitting, which couples communication reliability and energy delivery. This paper proposes a constant total power Stokes orthogonal architecture that conveys information through polarization while preserving the received optical power for photovoltaic conversion. Complementary polarization branches support balanced information detection through their AC components, while their DC components drive matched multi junction photonic power converters. The developed framework jointly characterizes pointing impaired propagation, bit error rate, outage, and nonlinear harvested power. The analysis establishes that the two information symbols only exchange the branch powers, leaving the unordered input power pair unchanged. Hence, the total harvested energy remains symbol invariant even under nonlinear conversion, without an explicit information energy power split or linear efficiency approximation. Numerical results confirm the analytical model, with the closed form BER approximation remaining within 0.43 percent of the exact evaluation over the examined pointing conditions. Compared with ideal lossless power splitting, the proposed architecture avoids the conventional BER versus harvested power tradeoff and provides an analytical baseline for power neutral joint information and energy transfer in inter satellite optical links.

0.24