CS Paper Radar

Ground-Truth-Aware Stress Testing of a Closed-Loop Smart-Building Digital Twin Under Sensor Drift and Missing Data

Lyes Saad Saoud

cs.CE ·submitted 2026-08-14 22:03 UTC · v1

Abstract

Digital twins are increasingly used for smart-building monitoring and control, yet many evaluations focus on state estimation or fault detection rather than whether sensing errors materially affect closed-loop outcomes. This paper introduces a ground-truth-aware simulation framework that separates the latent physical state from a corrupted sensing layer and compares practical sensor-driven policies with an oracle controller. The synthetic twin includes 20 zones simulated at 15-minute intervals over 30 days and models occupancy-driven CO2, ventilation-energy trade-offs, sensor drift, measurement noise, and missing observations. Policy comparisons use a one-step information delay and common random numbers for paired Monte Carlo evaluation. Under nominal sensing, the raw-sensor controller disagreed with the oracle on 2.59% of decision steps, while aggregate CO2, energy, and comfort outcomes remained nearly unchanged. At 8x nominal drift, decision mismatch increased to 7.00%, but outcome gaps remained small. Across a 4x4 drift-missingness grid, none of 48 sensor-driven policy-condition combinations crossed the predeclared material-divergence thresholds. A three-sample rolling median increased nominal mismatch from 2.59% to 6.31% without meaningful outcome improvement, and Ground-Truth Regret rankings varied with utility weights. The results show that sensor error, decision disagreement, and outcome degradation are related but distinct. Because the study is fully synthetic and uncalibrated, its contribution is methodological rather than a claim of real-building performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Attributing Sensor Deviations to Degradation, Weather, or Attack in Oilfield Digital Twins: A Simulation Study of Probabilistic Attribution and Cost-Based Decisions

cs.CR eess.SY ·2026-09-25 ·Mustafa S. Aljumaily, Nawar S. Alseelawi, Hayder Kareem Abed
code/data similarity 0.59
Abstract · 15 pages, 8 figures, 8 tables. Simulation study; code: https://github.com/nawaralseelawi/oilfield-dt-attribution

When an oilfield digital twin disagrees with its instruments, the operator must decide whether the cause is hardware degradation, harsh-weather effects, or malicious data manipulation. Existing digital-twin work appears to treat these causes separately: sensor-validation architectures target faults, and attack-focused twins have been evaluated on water-sector testbeds. We study joint cause attribution on a simulated four-well wellpad with 15 coupled instruments, legitimate operating transients, and weather. A physics-informed twin, identified from normal data only, produces analytical-redundancy residuals; windowed features feed a gradient-boosted classifier whose posterior drives an alarm gate with a fixed false-alarm rate and a cost-based decision rule that may defer to an analyst. On three independently generated sites, the classifier reaches macro-F1 of 0.818 on windows where the injected deviation is observable (0.723 when latent post-onset windows are included at the primary site). The physics twin accounts for essentially all of this: removing the data-driven twin changes macro-F1 by less than 0.01, whereas removing all twins drops it to about 0.58. Attacks are detected quickly (median 1.7 h) but attributed correctly at alarm time only 42% of the time, rising to 73% six hours later. A cost-aware policy that defers ambiguous cases had the lowest expected cost among all policies in every one of 144 cost and prior settings tested, sometimes by a small margin; the result depends on illustrative costs and on analysts resolving deferred cases. A twin-aware attacker was detected in 45% of episodes yet almost never attributed to attack. These results are conditional on the simulator's generative assumptions and have not been validated on field data.

0.39

Bayesian thermal digital twin for a space habitat subjected to an impact event

eess.SY eess.SP ·2026-09-04 ·Sreehari Manikkan, Seungho Rhee, Herta Montoya, Davide Ziviani, Shirley J. Dyke +1 more
similarity 0.56
Abstract

Space habitats may experience disruptive events, such as micro-meteorite impacts, that can induce structural damage and thermal anomalies in the interior environment, requiring resilient Environmental Control and Life Support Systems (ECLSS). Digital twins offer a promising paradigm for supporting resilience, onboard decision making, and uncertainty-aware autonomy. However, limited work has developed digital twins for the thermal aspects of ECLSS. This work develops a Bayesian thermal digital twin for a habitat cyber-physical testbed experiencing impact-induced thermal anomalies. We construct a coupled thermal resistance-capacitance network model representing the physical and cyber thermal subsystems and embed physics-based activation functions to automate model selection, enable adaptation, and facilitate health-state estimation. Offline Bayesian calibration is performed for the physical subsystem using experimental temperature data. For the cyber subsystem, reduction in structural protective layer thickness is identified as the impact-sensitive parameter. After fixing the physical parameters and insensitive parameters, Bayesian inference is performed continuously to estimate impact-relevant cyber parameters, enabling detection of impact location, timing, and severity. Synthetic studies examine hyperparameter selection, observability, and noise effects, and the final framework is validated using experimental testbed data. Results show that the proposed digital twin can detect impact-induced thermal anomalies, infer impact-relevant parameters with quantified uncertainty, generate informative temperature forecasts, and support time-to-critical estimation for autonomous habitat operation.

0.28

Reliability-Aware Scheduling for Digital Twin Maintenance

cs.NI ·2026-08-22 ·Milica Jankov, Carlo Fischione
published similarity 0.54
Abstract · accepted to IEEE GLOBECOM 2026

In Industrial Internet of Things systems, learning-enabled Digital Twins (DTs) support remote monitoring by using data reported by distributed devices to maintain digital representations of physical processes. When uplink resources are limited, a base station cannot collect new observations from every device at every communication slot and must decide which devices should transmit. This decision becomes challenging when the physical process changes after the DT models have already been trained. In such cases, recent observations alone may not keep the DT accurate, because the learned model may no longer match the underlying process. This paper studies how to schedule observation requests so that the DT maintained at the base station remains close to the true physical process. We define the Ensemble Disagreement Indicator (EDI) as an uncertainty measure computed at the base station from the spread among estimates produced by independently trained DT predictors. Building on EDI, we propose R-VoU, a reliability-aware value-of-update scheduler that prioritizes the observations expected to most improve the DT by reducing a cost based on uncertainty and predicted DT error. The DT is further adjusted online using the difference between received observations and current predictions. Experiments on process manufacturing data show that, under limited communication budgets, R-VoU achieves the lowest combined cost and DT estimation error among the compared schedulers that use only information available before each scheduling decision.

0.59

EnergyEminence: Source-Aware Environmental Calibration and Evaluation in a Physics-Grounded Grid Digital Twin

cs.LG eess.IV ·2026-09-28 ·Huy Trinh, Michael Mai, Yu Nong
similarity 0.53
Abstract

Power-grid digital twins must combine data-driven prediction with physically meaningful state evolution while preserving the provenance of environmental observations. This paper presents an early-stage EnergyEminence testbed that couples an IEEE 118-bus-style graph-temporal predictor, nonlinear AC cascade simulation, and operator-dashboard-like temporal replay. In addition, we introduce a shared bounded calibration that converts wildfire-detection confidence and spatial extent into source-comparable wildfire interpretable and explainable evidence. We then evaluate it with visually diverse fire and hard-negative videos. Sixteen synthetic environmental videos are curated to generate 160 source-tracked grid scenarios, and a source-video-disjoint test yields 10 true positives, 8 false positives, 22 true negatives, and no false negatives. The errors occur in stressed, non-cascading scenarios conditioned on an unseen growing-fire source. Our diagnostic then reveals environmental shortcut learning that is obscured by scenario-level random splitting. The paper therefore contributes a data-centric and inspectable evaluation workflow for multimodal grid-resilience models, together with evidence supporting separation of environmental alerting from electrical cascade inference

0.22

Reinforcement Twinning via Twin-Calibrated Bayesian Policy Search and Replay-Driven Identification

eess.SY ·2026-11-02 ·Miguel A. Mendez, Lorenzo Schena, Romain Poletti, Yannick Lecomte, Sebastiano Randino +1 more
similarity 0.53
Abstract

The feasibility of updating and synchronising digital twins of actuated systems from operational data depends strongly on how the system is controlled and, consequently, on the data generated during operation. This establishes a direct link between control actuation and model identifiability. This work presents a reinforcement-twinning framework that exploits this link through three computational components. A Gaussian-process surrogate of the physical return combines the twin prediction, used as a calibrated trend, with a discrepancy learned from measured returns, allowing Bayesian policy search to exploit the twin without being tied to its predictions. Candidate policies are proposed around the policy that is optimal for the twin, while measured returns can expand this region. The resulting physical episodes are replayed on the twin after observer-based synchronisation with sparse measurements, and its parameters are identified by combining Bayesian optimisation with gradient-based refinement. Selected information-oriented episodes deploy an excitation policy to improve parameter identifiability. The framework is demonstrated on a Burgers-flow analogue of dynamic-induction control in wind farms, with a deliberately misspecified model structure. Despite substantially biased return predictions, the twin provides a useful starting policy and search region, placing the guided search ahead of unguided Bayesian optimisation from its first physical evaluations. This advantage is maintained when the search region is allowed to expand in response to changes in measured returns, whereas searches over-constrained by the twin-defined region are eventually overtaken by the unguided alternatives. The results support reinforcement twinning as a framework for jointly adapting models and control policies when physical interaction is limited and model discrepancy cannot be neglected.

0.25

Bias-Aware Adjoint Calibration and Optimal Control of Stochastic Multiscale Bioprocess Digital Twins

cs.LG stat.ML ·2026-10-07 ·Keilung Choy, Wei Xie
similarity 0.53
Abstract · 35 pages, 8 figures

We develop a bias-aware digital-twin calibration and control framework for multiscale bioprocess models within a biological systems-of-systems (Bio-SoS) paradigm. The digital twin is represented by a stochastic differential equation (SDE) model and calibrated from sparse observations using quasi-likelihood estimation and adjoint sensitivity analysis. SDE generator-based moment expansions characterize truncation-induced parameter bias, while forward-backward adjoints quantify how calibration uncertainty propagates to value functions and policy performance. The resulting parameter-error distribution supports both policy-directed data acquisition and uncertainty-aware policy optimization through a second-order Gaussian-averaged objective. We characterize the asymptotic behavior of the resulting exploration criterion and derive a physical-system performance under the optimized policy. To implement these ideas, we develop an Actor-Simulator algorithm that jointly updates model parameters, selects informative experiments, and optimizes control policies. Numerical studies demonstrate improved calibration accuracy, sample efficiency, and control performance relative to state-of-the-art baselines.

0.29

Ruleless Digital Twins: Toward Declarative Decision-Making Through Standardized Frameworks and Technologies

cs.SE ·2026-10-07 ·Ivan Spajić, Volker Stolz
similarity 0.53
Abstract · 47 pages (bibliography included), expanded version of the Spajić and Stolz (2026) DataMod paper

Digital twins (DTs) can be thought of as digital counterparts of physical objects, or more generally, twinning targets (TTs). To enact changes on and optimize for properties of their TTs, DTs use an element of decision-making. Traditionally, many domains, such as home automation, utilize rule-based decision-making models to imperatively define DT actions based on desired TT conditions. With evolving user specifications, rule-based models have become increasingly complex to develop and maintain, particularly in scenarios involving optimizations under dynamically changing systems, such as those affected by weather or dynamic energy pricing. We present an alternative in the form of ruleless digital twins (RDTs) that automatically produce optimal decisions with respect to purely declarative user specifications, similarly to the well-established ruleless approach of model predictive control. They do so through a combination of a semantic knowledge base, logical inference, simulation models, and an autonomic computing architecture, each exclusively based on a widely-used standard or technology. We evaluate our proof of concept through an incubator case study and experiments against a rule-based bang-bang controller in the context of a virtual office room environment. Results show core that RDT functionality performs better than the control in terms of maintaining desired room temperatures and minimizing energy costs under dynamically changing spot pricing. Additionally, due to combinatorial decision tree construction, RDTs require considerable computational power for longer prediction horizons, although their applicability to specific problem domains (and use of shorter horizons) ultimately falls on their users.

0.31

Agreement Is Not Assurance: Evidence-Independent Safety Gates for Agentic AI in DER-Rich Distribution Grids

eess.SY ·2026-11-11 ·Qianxue Xia
similarity 0.53
Abstract · 10 pages, 3 figures, 4 tables

Physics-based safety gates for large language model (LLM) agents can approve unsafe actions when the agent and gate rely on the same corrupted measurements or network records. We formulate this shared-evidence failure for voltage-constrained distributed energy resource (DER) export decisions and analyze how nearly critical DER telemetry can bias state estimation while evading residual-based bad-data detection. We propose evidence-independent verification (EIV), which combines advanced metering infrastructure (AMI) voltage readings, measurement selection based on predicted voltage rise, and bounded physical probes. An IEEE 123-bus hidden-truth testbed evaluates 1,654 near-limit requests under telemetry attacks and record errors. For telemetry attacks targeting the nominal gate, an AC-twin gate with bad-data detection approved 95% of unsafe requests, compared with 3.1% for EIV; EIV rejected 22% of safe clean requests. At matched false-rejection settings, direct AMI checks outperformed incorporating the same readings into state estimation. Gate-targeted attacks exposed a vulnerability in telemetry-based response prediction. Command-based prediction removed that route, but targeted attacks on fresh validation cases still produced a 20% unsafe-approval rate under the tested attack pool. LLM agents frequently sought independent evidence voluntarily, but injected instructions and phase-label errors caused unsafe decisions. When offered the EIV checker as a tool, they used it in 93-100% of episodes; mandatory use did not reduce observed violations, which primarily reflected checker errors. These results distinguish enforcement of verification from reliability of the verifier itself.

0.27