CS Paper Radar

Bayesian thermal digital twin for a space habitat subjected to an impact event

Sreehari Manikkan, Seungho Rhee, Herta Montoya, Davide Ziviani, Shirley J. Dyke, Ilias Bilionis

eess.SY eess.SP ·submitted 2026-09-04 01:28 UTC · v1

Abstract

Space habitats may experience disruptive events, such as micro-meteorite impacts, that can induce structural damage and thermal anomalies in the interior environment, requiring resilient Environmental Control and Life Support Systems (ECLSS). Digital twins offer a promising paradigm for supporting resilience, onboard decision making, and uncertainty-aware autonomy. However, limited work has developed digital twins for the thermal aspects of ECLSS. This work develops a Bayesian thermal digital twin for a habitat cyber-physical testbed experiencing impact-induced thermal anomalies. We construct a coupled thermal resistance-capacitance network model representing the physical and cyber thermal subsystems and embed physics-based activation functions to automate model selection, enable adaptation, and facilitate health-state estimation. Offline Bayesian calibration is performed for the physical subsystem using experimental temperature data. For the cyber subsystem, reduction in structural protective layer thickness is identified as the impact-sensitive parameter. After fixing the physical parameters and insensitive parameters, Bayesian inference is performed continuously to estimate impact-relevant cyber parameters, enabling detection of impact location, timing, and severity. Synthetic studies examine hyperparameter selection, observability, and noise effects, and the final framework is validated using experimental testbed data. Results show that the proposed digital twin can detect impact-induced thermal anomalies, infer impact-relevant parameters with quantified uncertainty, generate informative temperature forecasts, and support time-to-critical estimation for autonomous habitat operation.

Closest papers

Nearest neighbours by meaning across the whole index.

Embedding Model-form Uncertainty in Probabilistic Calibration of Digital Twins for Bridges

cs.CE ·2026-09-09 ·Daniel Andrés Arcones, Martin Weiser, Phaedon-Stelios Koutsourelakis, Jörg F. Unger
similarity 0.65
Abstract · 29 pages, 12 figures, 6 tables

Digital twins of bridges rely on physics-based models to infer full-field structural responses from sparse monitoring data. The reliability of these predictions depends on the calibration of model parameters while accounting for discrepancies between the model and the physical system. Such discrepancies, commonly referred to as model-form uncertainty (MFU), arise from simplifying assumptions and incomplete representations of physical processes, and can substantially affect predictive reliability. Explicitly quantifying MFU during calibration is therefore essential for trustworthy digital-twin predictions. This work presents a calibration framework that explicitly represents MFU through stochastic parameter embedding. The framework is demonstrated using a simplified two-dimensional cross-sectional thermal model of the Nibelungenbrücke calibrated against temperature measurements from its monitoring system. By explicitly accounting for MFU, the proposed methodology enables computationally efficient models to be reliably employed within digital-twin environments while maintaining predictive credibility. The framework introduces a three-step calibration strategy that progressively addresses sources of discrepancy while maintaining a clear distinction between identified uncertainties. Variance decomposition is used to characterize the structure of predictive uncertainty and its propagation to quantities of interest. Remaining discrepancies between predictive distributions and observations are quantified using Kolmogorov-Smirnov metrics to assess predictive consistency across seasonal conditions. The results demonstrate that explicitly accounting for MFU improves the interpretability and reliability of predictive uncertainties and validate the methodology for calibration of physics-based models supporting digital twins in structural health monitoring.

0.19

Ground-Truth-Aware Stress Testing of a Closed-Loop Smart-Building Digital Twin Under Sensor Drift and Missing Data

cs.CE ·2026-08-14 ·Lyes Saad Saoud
similarity 0.56
Abstract

Digital twins are increasingly used for smart-building monitoring and control, yet many evaluations focus on state estimation or fault detection rather than whether sensing errors materially affect closed-loop outcomes. This paper introduces a ground-truth-aware simulation framework that separates the latent physical state from a corrupted sensing layer and compares practical sensor-driven policies with an oracle controller. The synthetic twin includes 20 zones simulated at 15-minute intervals over 30 days and models occupancy-driven CO2, ventilation-energy trade-offs, sensor drift, measurement noise, and missing observations. Policy comparisons use a one-step information delay and common random numbers for paired Monte Carlo evaluation. Under nominal sensing, the raw-sensor controller disagreed with the oracle on 2.59% of decision steps, while aggregate CO2, energy, and comfort outcomes remained nearly unchanged. At 8x nominal drift, decision mismatch increased to 7.00%, but outcome gaps remained small. Across a 4x4 drift-missingness grid, none of 48 sensor-driven policy-condition combinations crossed the predeclared material-divergence thresholds. A three-sample rolling median increased nominal mismatch from 2.59% to 6.31% without meaningful outcome improvement, and Ground-Truth Regret rankings varied with utility weights. The results show that sensor error, decision disagreement, and outcome degradation are related but distinct. Because the study is fully synthetic and uncalibrated, its contribution is methodological rather than a claim of real-building performance.

0.04

Attributing Sensor Deviations to Degradation, Weather, or Attack in Oilfield Digital Twins: A Simulation Study of Probabilistic Attribution and Cost-Based Decisions

cs.CR eess.SY ·2026-09-25 ·Mustafa S. Aljumaily, Nawar S. Alseelawi, Hayder Kareem Abed
code/data similarity 0.56
Abstract · 15 pages, 8 figures, 8 tables. Simulation study; code: https://github.com/nawaralseelawi/oilfield-dt-attribution

When an oilfield digital twin disagrees with its instruments, the operator must decide whether the cause is hardware degradation, harsh-weather effects, or malicious data manipulation. Existing digital-twin work appears to treat these causes separately: sensor-validation architectures target faults, and attack-focused twins have been evaluated on water-sector testbeds. We study joint cause attribution on a simulated four-well wellpad with 15 coupled instruments, legitimate operating transients, and weather. A physics-informed twin, identified from normal data only, produces analytical-redundancy residuals; windowed features feed a gradient-boosted classifier whose posterior drives an alarm gate with a fixed false-alarm rate and a cost-based decision rule that may defer to an analyst. On three independently generated sites, the classifier reaches macro-F1 of 0.818 on windows where the injected deviation is observable (0.723 when latent post-onset windows are included at the primary site). The physics twin accounts for essentially all of this: removing the data-driven twin changes macro-F1 by less than 0.01, whereas removing all twins drops it to about 0.58. Attacks are detected quickly (median 1.7 h) but attributed correctly at alarm time only 42% of the time, rising to 73% six hours later. A cost-aware policy that defers ambiguous cases had the lowest expected cost among all policies in every one of 144 cost and prior settings tested, sometimes by a small margin; the result depends on illustrative costs and on analysts resolving deferred cases. A twin-aware attacker was detected in 45% of episodes yet almost never attributed to attack. These results are conditional on the simulator's generative assumptions and have not been validated on field data.

0.39

RESILAGENT: A Three-Pillar Architecture for Cyber-Physical Resilience in Electrical Power and Energy Systems

cs.CR cs.AIeess.SY ·2026-11-16 ·Nikolaos Kekatos, Georgios Koutidis, Konstantinos Antonakopoulos, Stylianos Basagiannis, Sokratis Katsikas +4 more
publishedbenchmark similarity 0.55
Abstract · 7 pages, 5 figures, 1 table. Accepted at the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR 2026)

Electrical Power and Energy Systems face hybrid threats that combine cyber intrusions, physical sabotage and climate-driven stress, and routinely outpace today's siloed monitoring stacks. We present RESILAGENT, a concept architecture organised around three operational pillars, Sensing & Data Intelligence, Resilience Analytics & Reporting, and Incident Response & Recovery, mediated by a Cloud-based Orchestrator and exercised through a closed Detect-Simulate-Decide-Sign loop. The framework fuses agentic artificial intelligence and multimodal large language models for cross-modal detection, real-time digital twins for what-if simulation, and a permissioned blockchain anchor for tamper-evident threat intelligence and CER/NIS2-aligned evidence. We instantiate it on two scenarios, a transmission operator under coordinated cyber compromise, sabotage and heatwave, and a distribution operator under a supply-chain compromise during a storm, and report an IEEE-bus micro-benchmark that quantifies each pillar through false-data-injection attack detection, cyber-physical fusion lift, N-1 contingency screening and anchor cost.

0.44

The PUR-1 Cyber-Physical Digital Twin

cs.CE cs.LG ·2026-08-31 ·Vasileios Theos, Jonah Lau, Konstantinos Gkouliaras, Zachery Dahm, Konstantinos Vasili +5 more
similarity 0.54
Abstract

Digital twin technologies have the potential to improve operational flexibility and responsiveness capabilities of nuclear systems. To provide decision support, cyber event characterization, state estimation, predictive control, and real-time dynamic processing of operational data, however, an efficient digital twin needs to integrate multiple models (data-driven as well as physics-based) with explainability while at the same time maintain two-way synchronization with the physical facility at a time constant less than its operational cycle. In this work, we present the Purdue University Reactor One Digital Twin (PUR-1 DT), a cyber-physical digital twin with a complete high-fidelity physics-based and AI-driven virtual model stack (neutronics, thermal-hydraulics, point kinetics) which provides closed-loop explainable diagnostics, forecasting, predictive control, and action recommendation back to the reactor via two-way communications and a cyber-physical testbed. We demonstrate real-time synchronized state estimation and short-term forecasting over a full reactor operational cycle and conduct a series of benchmarking experiments to validate accuracy and latency. Our results show good agreement with experimental results and lay the groundwork for further development and experimental demonstration of DT-enabled functionalities in real-world facilities.

0.48

Digital Twin Degradation: Detecting Cyber Physical Attacks via Temporal Inconsistencies

cs.CR cs.AIcs.LG ·2026-08-17 ·Konstantinos E. Kampourakis, Vasileios Gkioulos, Sokratis Katsikas
similarity 0.54
Abstract · 18 pages, 2 figures

Digital Twins (DTs) are increasingly used to monitor and analyze Cyber Physical Systems (CPS). However, in adversarial environments, the fidelity of a DT cannot be assumed. Communication delays, data manipulation, sensor degradation, or partial information loss may cause the DT state to diverge from the physical process it represents. Such divergence creates temporal inconsistencies that may reveal cyber physical attacks. This paper proposes a detection framework that monitors temporal consistency between the physical system and a potentially degraded DT view. A DT predictor is trained exclusively on normal system behavior to model short-term system dynamics. During operation, discrepancies between predicted and observed states are transformed into multi-horizon temporal features capturing the magnitude, persistence, and evolution of prediction residuals. An unsupervised density model characterizes normal consistency patterns, while a sequential change detection mechanism identifies sustained deviations indicative of attacks. The approach is evaluated on three widely used Industrial Control System (ICS) datasets, SWaT, HAI, and BATADAL, under multiple DT degradation scenarios, including time desynchronization and partial observability loss. Results show that temporal inconsistency patterns enable reliable event-level attack detection with bounded false alarm rates and low detection latency. The proposed method achieves up to 98% detection reliability on SWaT and false alarm rates below 2%. Unlike conventional anomaly detection methods, the proposed framework does not require attack signatures or labeled attack data and remains effective even when the DT view is degraded. These results suggest that DT degradation, often treated as a limitation, can instead serve as a useful signal for cyber physical security monitoring.

0.50

Estimating Inconsistency Response Surfaces under Uncertainty in Cyber-Physical System Development

cs.LG cs.SEeess.SY ·2026-09-10 ·Johannes Mäkelburg, Tim Schwabe, Maribel Acosta
top venue similarity 0.54
Abstract · Extended version of the paper accepted at IEEE ICDM 2026; 10 pages + appendix, 11 figures, 3 tables

Cyber-Physical Systems (CPS) are commonly represented through multiple interconnected models. During development, CPS consistency requires that shared model elements remain compatible across these models. Uncertainty, for example, due to sensor noise or model abstraction, changes the admissible values of model elements and can introduce inconsistencies, i.e., situations in which models can no longer be jointly satisfied. While existing approaches can determine consistency for a given uncertainty configuration, they provide limited support for systematically exploring, analyzing, and explaining inconsistency across large uncertainty spaces. We address this challenge by reformulating inconsistency as an intervention response modeling problem. Using Saltelli sampling and multi-fidelity Monte Carlo estimation, we generate intervention-response datasets and train a surrogate model that directly predicts inconsistency from the propagated uncertainty geometry. Experiments on 48 scenarios and 10 CPS domains show that the surrogate matches Monte Carlo estimates while reducing evaluation time from milliseconds to microseconds, enabling orders-of-magnitude more response-surface evaluations within fixed computational budgets. Building on the learned response surfaces, we perform sensitivity analysis to identify dominant uncertainty drivers and introduce a gradient-based consistency recourse method to determine minimal uncertainty interventions that restore consistency. The results show that inconsistency under uncertainty can be effectively learned, analyzed, and repaired through response-surface modeling, providing a scalable foundation for uncertainty-aware consistency management in CPS development.

0.51

Decision-Making in Digital Twins: Optimization, Control, and Learning

eess.SY math.OC ·2026-10-12 ·Enlu Zhou
similarity 0.53
Abstract

A digital twin is a virtual representation of a physical system, continuously updated with data from the physical system, enabling dynamic information exchange and decision-making. This bidirectional interaction, which distinguishes digital twins from conventional simulation models, introduces new challenges to simulation-based optimization, control, and learning. This paper reviews recent developments in decision-making methodologies motivated by digital twins. We focus on three interconnected areas: simulation optimization, sequential decision making, and risk-aware decision making. For simulation optimization, we discuss data-driven simulation optimization under input uncertainty, streaming input data, decision-dependent observations, and limited computational and data-collection resources. For sequential decision making, we review the connections among digital twins, stochastic optimal control, and reinforcement learning, with emphasis on Bayesian approaches that update models and policies as new information becomes available. For risk-aware decision making, we discuss distributionally robust and Bayesian risk formulations as alternative approaches for addressing model uncertainty. Throughout the paper, we emphasize the common problem of making decisions while the underlying model is being updated. We conclude by identifying research challenges and opportunities.

0.27