CS Paper Radar

Embedding Model-form Uncertainty in Probabilistic Calibration of Digital Twins for Bridges

Daniel Andrés Arcones, Martin Weiser, Phaedon-Stelios Koutsourelakis, Jörg F. Unger

cs.CE ·submitted 2026-09-09 13:42 UTC · v1

Abstract

Digital twins of bridges rely on physics-based models to infer full-field structural responses from sparse monitoring data. The reliability of these predictions depends on the calibration of model parameters while accounting for discrepancies between the model and the physical system. Such discrepancies, commonly referred to as model-form uncertainty (MFU), arise from simplifying assumptions and incomplete representations of physical processes, and can substantially affect predictive reliability. Explicitly quantifying MFU during calibration is therefore essential for trustworthy digital-twin predictions. This work presents a calibration framework that explicitly represents MFU through stochastic parameter embedding. The framework is demonstrated using a simplified two-dimensional cross-sectional thermal model of the Nibelungenbrücke calibrated against temperature measurements from its monitoring system. By explicitly accounting for MFU, the proposed methodology enables computationally efficient models to be reliably employed within digital-twin environments while maintaining predictive credibility. The framework introduces a three-step calibration strategy that progressively addresses sources of discrepancy while maintaining a clear distinction between identified uncertainties. Variance decomposition is used to characterize the structure of predictive uncertainty and its propagation to quantities of interest. Remaining discrepancies between predictive distributions and observations are quantified using Kolmogorov-Smirnov metrics to assess predictive consistency across seasonal conditions. The results demonstrate that explicitly accounting for MFU improves the interpretability and reliability of predictive uncertainties and validate the methodology for calibration of physics-based models supporting digital twins in structural health monitoring.

Comment
29 pages, 12 figures, 6 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Bayesian thermal digital twin for a space habitat subjected to an impact event

eess.SY eess.SP ·2026-09-04 ·Sreehari Manikkan, Seungho Rhee, Herta Montoya, Davide Ziviani, Shirley J. Dyke +1 more
similarity 0.65
Abstract

Space habitats may experience disruptive events, such as micro-meteorite impacts, that can induce structural damage and thermal anomalies in the interior environment, requiring resilient Environmental Control and Life Support Systems (ECLSS). Digital twins offer a promising paradigm for supporting resilience, onboard decision making, and uncertainty-aware autonomy. However, limited work has developed digital twins for the thermal aspects of ECLSS. This work develops a Bayesian thermal digital twin for a habitat cyber-physical testbed experiencing impact-induced thermal anomalies. We construct a coupled thermal resistance-capacitance network model representing the physical and cyber thermal subsystems and embed physics-based activation functions to automate model selection, enable adaptation, and facilitate health-state estimation. Offline Bayesian calibration is performed for the physical subsystem using experimental temperature data. For the cyber subsystem, reduction in structural protective layer thickness is identified as the impact-sensitive parameter. After fixing the physical parameters and insensitive parameters, Bayesian inference is performed continuously to estimate impact-relevant cyber parameters, enabling detection of impact location, timing, and severity. Synthetic studies examine hyperparameter selection, observability, and noise effects, and the final framework is validated using experimental testbed data. Results show that the proposed digital twin can detect impact-induced thermal anomalies, infer impact-relevant parameters with quantified uncertainty, generate informative temperature forecasts, and support time-to-critical estimation for autonomous habitat operation.

0.28

A Vehicle-Integrated Approach to Digital Twin Deployment for Bridges Through Drive-By Sensing

cs.LG ·2026-09-25 ·Zihao Liu, Daigo Kawabe, Jiaji Wang, Chul-Woo Kim, Mehrisadat Makki Alamdari
similarity 0.58
Abstract · Extended abstract for 2nd International Conference on Engineering Structures (ICES2026)

Ageing bridge infrastructure is a growing global concern, yet conventional Structural Health Monitoring (SHM) systems are costly and difficult to scale, and routine visual inspections remain subjective. Drive-by, or indirect, bridge inspection, in which a sensorised vehicle recovers structural information from vehicle-bridge interaction (VBI) and vehicle-road interaction (VRI) responses, offers a scalable alternative. However, key challenges remain unresolved, including separating bridge responses from road roughness, detecting damage under normal traffic, and generalising across diverse bridge types. This paper presents a vehicle-integrated digital twin framework that unifies physics-based modelling and machine learning for continuous monitoring of bridge and road conditions. The framework comprises three pillars. First, surrogate models of VBI and VRI are constructed using a Fourier Neural Operator that learns function-to-function mappings from operating conditions to vehicle responses. Trained on both simulated and field data, these surrogates deliver millisecond-scale inference, replacing computationally intensive full-order analyses. Second, the design of a custom electric inspection vehicle, its sensor layout, and signal processing chain are optimised through Bayesian optimisation to maximise bridge information yield while suppressing road and vehicle noise. Unsupervised damage-assessment pipelines based on adversarial autoencoders, matrix profiles, and transformer architectures have been developed and validated to process the resulting vehicle data. Third, the complete workflow is validated through coordinated multi-site field trials in Australia and Japan, covering a range of bridge types, traffic conditions, and environmental settings.

0.32

TRACE: Learning to Self-Calibrate Wireless Digital Twins from ISAC Measurements

cs.AI eess.SP ·2026-09-26 ·Saad Masrur, Saeed R. Khosravirad, Ismail Guvenc
similarity 0.55
Abstract · Under Review

Wireless digital twins (DTs) rely on 3D environment models to predict radio propagation and support wireless-network decisions, yet these models are often initialized from imperfect 3D maps. Errors in building position, height, footprint, and orientation can therefore cause a high-fidelity propagation engine to simulate the wrong physical environment. In this paper, we study how a deployed wireless network can repair an existing DT using its own radio frequency (RF) measurements. In particular, we introduce Twin Residual Alignment and Calibration Engine (TRACE), a physics-grounded learning-based self-calibration framework that treats twin maintenance as residual alignment between the physical world and the current DT. Using the same sensing configuration as the physical measurements, TRACE ray-traces the current DT, coherently backprojects the measured and simulated RF onto a common world grid, and extracts the same local region around each building's current DT position. A multi-view corrector then fuses evidence across sensing nodes and neighboring buildings to predict a gated six-parameter correction per building, without relying on absolute layout or sensor ordering, and supports iterative correction through re-rendering. On 5,400 held-out samples from unseen simulated scenes at 28 GHz, TRACE reduces 3D position RMSE from 2.202 m to 0.302 m and yaw RMSE from 4.978° to 0.894°, outperforming ViT and U-Net baselines under changes in layout, building count, sensing-node count, and SNR. On measured 28 GHz RF data from the NIST outdoor courtyard, a model trained only on synthetic RF reduces mean planar wall-position error from 1.00 m to 7.8 cm, without measured-data fine-tuning or geometric labels. These results show that the discrepancy between measured and twin-rendered RF can serve as a learning signal for repairing a wireless DT.

0.12

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.55
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

Bias-Aware Adjoint Calibration and Optimal Control of Stochastic Multiscale Bioprocess Digital Twins

cs.LG stat.ML ·2026-10-07 ·Keilung Choy, Wei Xie
similarity 0.54
Abstract · 35 pages, 8 figures

We develop a bias-aware digital-twin calibration and control framework for multiscale bioprocess models within a biological systems-of-systems (Bio-SoS) paradigm. The digital twin is represented by a stochastic differential equation (SDE) model and calibrated from sparse observations using quasi-likelihood estimation and adjoint sensitivity analysis. SDE generator-based moment expansions characterize truncation-induced parameter bias, while forward-backward adjoints quantify how calibration uncertainty propagates to value functions and policy performance. The resulting parameter-error distribution supports both policy-directed data acquisition and uncertainty-aware policy optimization through a second-order Gaussian-averaged objective. We characterize the asymptotic behavior of the resulting exploration criterion and derive a physical-system performance under the optimized policy. To implement these ideas, we develop an Actor-Simulator algorithm that jointly updates model parameters, selects informative experiments, and optimizes control policies. Numerical studies demonstrate improved calibration accuracy, sample efficiency, and control performance relative to state-of-the-art baselines.

0.29

Integrating Machine Learning and Uncertainty Quantification for Real-Time Decision-Making in Digital Twins: A System-Centric Review and Perspective

cs.LG stat.AP ·2026-11-03 ·Yi-Ping Chen, Ying-Kuan Tsai, Seul Lee, Vispi Karkaria, Dex Doksoo Lee +1 more
similarity 0.54
Abstract

Digital Twins are evolving from passive virtual representations into closed-loop systems that continuously synchronize with physical assets and drive real-time decisions. Yet predictive modeling, machine learning (ML), uncertainty quantification (UQ), and decision-making have been studied as separate capabilities, leaving limited understanding of their integration and maintenance during online operation. This narrative review, scoped by the functional requirements of real-time decision-making rather than by Digital Twin terminology alone, examines how such decisions are generated and sustained in engineering Digital Twins. We first examine foundational decision-making architectures and representative engineering applications, followed by methods that address their limitations across the decision loop. We identify optimization-based, policy-based, and knowledge-based approaches as the major pathways from virtual representation to action. Across them, ML plays three roles in decision-making: enabling efficient surrogate modeling, transforming heterogeneous physical feedback into decision-relevant information, and accelerating or directly generating decisions. UQ supports uncertainty-aware decisions and model adaptation, while continual validation, drift detection, and adaptation help maintain reliable operation as the physical system evolves. Together, these findings underscore the need for a shift from a model-centric to a system-centric perspective on Digital Twins, where its performance depends on the interactions with sensing, state estimation, computation, decision-making, and adaptation rather than on their standalone performance. Therefore, future research should shift from isolated algorithm development toward system-level co-design, scalable decision-making, and approaches to design, and data-efficient continual adaptation and validation for AI-enabled autonomous systems.

0.15

A Human-Centric Adaptive Multi-Fidelity Digital Twin Framework for Cyber-Physical Systems

cs.HC eess.SY ·2026-11-18 ·Clarisa Grijalva-Lugo, Yu-Zheng Lin, Shalaka Satam, Sicong Shao, Jesus Pacheco +2 more
similarity 0.53
Abstract · 20 pages, 3 figures, 11 tables; submitted to Advanced Engineering Informatics

Digital twins of cyber-physical systems must operate with scarce data, on assets that change after deployment, and for humans whose needs differ, yet existing implementations fix fidelity at design time and do not match the representation to the human or the task. This paper proposes a human-centric adaptive multi-fidelity digital twin framework that models the evolving human, the physical twin, and the digital twin core, and adds a human inference and adaptation function that estimates the human state, predicts the response, and adapts the representation. The framework defines low-, medium-, and high-fidelity tiers distinguished by adaptivity and by coupling, quantified as the ratio of the digital twin latency to the duration of the process step it follows. Three proof-of-concept instantiations are evaluated: a virtual reality tutor, a computer numerical control milling model, and an industrial training station. The low tier estimated learner sentiment with an accuracy of 0.86. The forecasters of the milling model and the training station, both medium-tier, showed a normalized error decline of 0.39 to 0.89 and a human adaptation gain of 1.16 to 1.51, but their latency exceeded the physical process step by 25 to 87 times. Only the station's vision model met the physical step. The tiers are separated by which functions adapt and where the latency constraint lies, not by a monotone increase in gain or coupling.

0.22

Multi-Level Bayesian Calibration of a Multi-Component Dynamic System Model

cs.CE eess.SYstat.MEstat.ML ·2026-08-19 ·Berkcan Kapusuzoglu, Sankaran Mahadevan, Shunsaku Matsumoto, Yoshitomo Miyagi, Daigo Watanabe
publishedunusualhighly cited similarity 0.52
Abstract · ASME Journal of Computing and Information Science in Engineering

This paper proposes a multi-level Bayesian calibration approach that fuses information from heterogeneous sources and accounts for uncertainties in modeling and measurements for time-dependent multi-component systems. The developed methodology has two elements: quantifying the uncertainty at component and system levels, by fusing all available information, and corrected model prediction. A multi-level Bayesian calibration approach is developed to estimate component-level and system-level parameters using measurement data that are obtained at different time instances for different system components. Such heterogeneous data are consumed in a sequential manner, and an iterative strategy is developed to calibrate the parameters at the two levels. This calibration strategy is implemented for two scenarios: offline and online. The offline calibration uses data that is collected over all the time-steps, whereas online calibration is performed in real-time as new measurements are obtained at each time-step. Analysis models and observation data for the thermo-mechanical behavior of gas turbine engine rotor blades are used to analyze the effectiveness of the proposed approach.

0.66