CS Paper Radar

Multi-Level Bayesian Calibration of a Multi-Component Dynamic System Model

Berkcan Kapusuzoglu, Sankaran Mahadevan, Shunsaku Matsumoto, Yoshitomo Miyagi, Daigo Watanabe

cs.CE eess.SYstat.MEstat.ML ·submitted 2026-08-19 01:44 UTC · v1
publishedunusualhighly cited

Abstract

This paper proposes a multi-level Bayesian calibration approach that fuses information from heterogeneous sources and accounts for uncertainties in modeling and measurements for time-dependent multi-component systems. The developed methodology has two elements: quantifying the uncertainty at component and system levels, by fusing all available information, and corrected model prediction. A multi-level Bayesian calibration approach is developed to estimate component-level and system-level parameters using measurement data that are obtained at different time instances for different system components. Such heterogeneous data are consumed in a sequential manner, and an iterative strategy is developed to calibrate the parameters at the two levels. This calibration strategy is implemented for two scenarios: offline and online. The offline calibration uses data that is collected over all the time-steps, whereas online calibration is performed in real-time as new measurements are obtained at each time-step. Analysis models and observation data for the thermo-mechanical behavior of gas turbine engine rotor blades are used to analyze the effectiveness of the proposed approach.

Comment
ASME Journal of Computing and Information Science in Engineering
Journal ref
J. Comput. Inf. Sci. Eng. 23(1), 011006 (2023)
DOI
10.1115/1.4055315

Closest papers

Nearest neighbours by meaning across the whole index.

Embedding Model-form Uncertainty in Probabilistic Calibration of Digital Twins for Bridges

cs.CE ·2026-09-09 ·Daniel Andrés Arcones, Martin Weiser, Phaedon-Stelios Koutsourelakis, Jörg F. Unger
similarity 0.52
Abstract · 29 pages, 12 figures, 6 tables

Digital twins of bridges rely on physics-based models to infer full-field structural responses from sparse monitoring data. The reliability of these predictions depends on the calibration of model parameters while accounting for discrepancies between the model and the physical system. Such discrepancies, commonly referred to as model-form uncertainty (MFU), arise from simplifying assumptions and incomplete representations of physical processes, and can substantially affect predictive reliability. Explicitly quantifying MFU during calibration is therefore essential for trustworthy digital-twin predictions. This work presents a calibration framework that explicitly represents MFU through stochastic parameter embedding. The framework is demonstrated using a simplified two-dimensional cross-sectional thermal model of the Nibelungenbrücke calibrated against temperature measurements from its monitoring system. By explicitly accounting for MFU, the proposed methodology enables computationally efficient models to be reliably employed within digital-twin environments while maintaining predictive credibility. The framework introduces a three-step calibration strategy that progressively addresses sources of discrepancy while maintaining a clear distinction between identified uncertainties. Variance decomposition is used to characterize the structure of predictive uncertainty and its propagation to quantities of interest. Remaining discrepancies between predictive distributions and observations are quantified using Kolmogorov-Smirnov metrics to assess predictive consistency across seasonal conditions. The results demonstrate that explicitly accounting for MFU improves the interpretability and reliability of predictive uncertainties and validate the methodology for calibration of physics-based models supporting digital twins in structural health monitoring.

0.19

Variable Dimension IMM and GPB2 Filters for Tracking in Multiple Model Systems

eess.SP ·2026-09-25 ·Roberto Pérez-Pérez, Ángel F. García-Fernández
top venuecode/data similarity 0.50
Abstract · Matlab code of VD-IMM and VD-GPB2 is provided at https://github.com/ropperez/VD_Multiple_Models

This paper presents mathematically principled filters for multiple-model systems with states of different dimensionality, specifically the variable-dimension interacting multiple model (VD-IMM) filter and the variable-dimension generalised pseudo-Bayesian filter of order 2 (VD-GPB2). To do so, we first provide a Bayesian modelling of a variable dimensional dynamic system, and its measurements. Then, for variable dimensional linear Gaussian dynamic and measurement models, the VD-IMM filter is derived by assuming a posterior that has a Gaussian density for each mode, and then performing a Kullback-Leibler Divergence (KLD) minimisation after each prediction step to keep the Gaussian density form for each mode. Subsequently, the Bayesian update step is performed, keeping a Gaussian density for each mode. The VD-GPB2 filter considers the same model as the VD-IMM filter and also assumes that the posterior for each mode is Gaussian. In contrast, the VD-GPB2 filter propagates a Gaussian mixture for each mode in the prediction step. In the update step, the VD-GPB2 filter performs a KLD minimisation to have a Gaussian density for each mode. Simulation results show the benefits of the VD-IMM and VD-GPB2 filters compared to previous alternatives.

0.55

A Bayesian Framework for Safe Optimal Control of Unknown Systems from Input-Output Data

eess.SY cs.LGmath.OC ·2026-11-02 ·Robert Lefringhausen, Annalena Daniels, Michael Fink, Sandra Hirche
code/data similarity 0.49
Abstract · 15 pages, 4 figures, 2 tables. Submitted to Automatica. Code available at https://github.com/TUM-ITR/PosteriorScenarioPlanning.jl

As control engineering is applied to increasingly complex systems, learning-based control, which uses empirical data to reduce the reliance on first-principles models, has emerged as a promising paradigm. However, such approaches must cope with nonlinear and stochastic dynamics, the absence of state measurements, and scarce data, while ensuring safe operation under constraints, which requires rigorous uncertainty quantification. Whereas existing methods treat these challenges in isolation, this article proposes a Bayesian framework that jointly addresses them. A prior in state-space form is updated from input-output data using particle Markov chain Monte Carlo methods, yielding a representation of joint uncertainty over dynamics and latent states. Building on this representation, a validation procedure is developed that provides probabilistic guarantees for constraint satisfaction under arbitrary causal control laws. For control synthesis, a formulation penalizing the conditional value-at-risk of the constraint function is proposed, together with an adaptive calibration mechanism that adjusts the performance-robustness trade-off to achieve a desired robustness level. The probability of successful certification is characterized theoretically. The framework is extended to a receding-horizon setting, where posterior updates from new measurements allow the controller to progressively reduce uncertainty and improve performance. The approach is demonstrated on the optimal control of a vertical farm.

0.42

Uncertainty-Aware Parameter Estimation for Condition Monitoring of Power Converters

eess.SY ·2026-08-31 ·Tomas Monopoli, Jiahong Liu, Shuai Zhao
similarity 0.48
Abstract

Changes in circuit parameters can indicate component degradation in power converters, but measurement noise and limited parameter observability can make these changes difficult to detect reliably. This paper proposes an uncertainty-aware parameter estimation framework to distinguish genuine parameter changes from variations caused by estimation uncertainty. Using a differentiable switched converter model, the method requires only one or two samples per switching period. Model-derived residual whitening and a Bayesian posterior approximation quantify estimation uncertainty and reveal poorly identifiable parameters. Simulations demonstrate improved estimation accuracy over least-squares and physics-informed neural-network benchmarks, with uncertainty estimates consistent with repeated noise realizations. Experiments on a laboratory buck converter validate the estimated parameters against independently derived references and demonstrate the detection of a controlled output-capacitance reduction. The proposed framework provides a basis for reliable parameter-change detection in power converter condition monitoring.

0.34

Large-Scale Bayesian Optimisation Using Uncertainty-Calibrated Product-of-Experts Gaussian Process Models with Trust Regions

cs.LG ·2026-11-01 ·Yean Hoon Ong
similarity 0.48
Abstract

The use of collections of independent local Gaussian processes (GP-ind) combined with trust regions is a widely adopted approach for large-scale and high-dimensional Bayesian optimisation (BO). However, this approach suffers from several limitations, including discontinuities at the boundaries of disjoint regions, an inability to capture long-range spatial correlations, potential information loss, and abrupt increases in computational overhead. To address these limitations, this paper introduces a novel BO algorithm, termed BO-pro-c-tr. The proposed method employs a product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) as its surrogate model and incorporates a one-to-many association strategy for integrating GP-pro-c with trust regions. Empirical results suggest that, when combined with the GP-LCB acquisition function, BO-pro-c-tr achieves an average reduction of 2.6% in simple regret and 34.9% in computational overhead relative to BO algorithms based on independent local GP models coupled with trust regions.

0.07

Prediction Uncertainty Controlled Computer Model Calibration

cs.LG stat.MLstat.APstat.CO+1 ·2026-10-22 ·Ryan Heejoon Byun, Dayeon Yoon, Won Chang
benchmark similarity 0.48
Abstract

Computer-model calibration is usually undertaken in service of prediction, yet neither Bayesian Kennedy-O'Hagan (KOH) calibration nor amortized simulation-based inference is built to control the predictive error of the calibrated simulator. When parameters are weakly identified or the data-model discrepancy is misspecified, the simulator-output bands induced by a nominal posterior level can be far from nominal. We propose a two-layer framework that targets predictive miscoverage directly. First, a conditional flow-matching model learns an amortized posterior for the calibration parameters, trained on simulator outputs perturbed with Gaussian-process discrepancies of varying structure. Second, conformal risk control arranges posterior draws for the target observation into nested candidate sets and selects the smallest one whose fixed-rank pointwise bands attain a prescribed time-averaged miscoverage on a synthetic calibration sample. Under exchangeability of calibration and target observations, the bands control expected miscoverage in finite samples. In a synthetic benchmark, the proposed bands are roughly 20% the width of KOH-MCMC bands with miscoverage near the 10% target. In calibrating an age-structured SEIR model to the 2010 Malawi measles outbreak, they are again sharper and near-nominal, and the weeks they fail to cover coincide with the asymmetric epidemic decline, exposing structural inadequacy of the mechanistic model.

0.15

Bayesian thermal digital twin for a space habitat subjected to an impact event

eess.SY eess.SP ·2026-09-04 ·Sreehari Manikkan, Seungho Rhee, Herta Montoya, Davide Ziviani, Shirley J. Dyke +1 more
similarity 0.47
Abstract

Space habitats may experience disruptive events, such as micro-meteorite impacts, that can induce structural damage and thermal anomalies in the interior environment, requiring resilient Environmental Control and Life Support Systems (ECLSS). Digital twins offer a promising paradigm for supporting resilience, onboard decision making, and uncertainty-aware autonomy. However, limited work has developed digital twins for the thermal aspects of ECLSS. This work develops a Bayesian thermal digital twin for a habitat cyber-physical testbed experiencing impact-induced thermal anomalies. We construct a coupled thermal resistance-capacitance network model representing the physical and cyber thermal subsystems and embed physics-based activation functions to automate model selection, enable adaptation, and facilitate health-state estimation. Offline Bayesian calibration is performed for the physical subsystem using experimental temperature data. For the cyber subsystem, reduction in structural protective layer thickness is identified as the impact-sensitive parameter. After fixing the physical parameters and insensitive parameters, Bayesian inference is performed continuously to estimate impact-relevant cyber parameters, enabling detection of impact location, timing, and severity. Synthetic studies examine hyperparameter selection, observability, and noise effects, and the final framework is validated using experimental testbed data. Results show that the proposed digital twin can detect impact-induced thermal anomalies, infer impact-relevant parameters with quantified uncertainty, generate informative temperature forecasts, and support time-to-critical estimation for autonomous habitat operation.

0.28

Bayesian Optimisation Using Product-of-Experts Gaussian Process Models with Uncertainty Calibration

cs.LG ·2026-09-14 ·Yean Hoon Ong
similarity 0.47
Abstract

Bayesian optimisation (BO) typically relies on a single global Gaussian process (GP) model as its surrogate model. However, GP regression has cubic computational complexity in the number of training data points, limiting its applicability to large-scale optimisation problems. The product-of-experts Gaussian process model with uncertainty calibration (GP-pro-c) mitigates this limitation by combining multiple local GP experts, enabling improved uncertainty quantification, reduced computational cost, and preservation of global correlations. Despite these desirable properties, the use of GP-pro-c in BO has not been thoroughly studied. This paper introduces BO-pro-c, a Bayesian optimisation algorithm that uses GP-pro-c as its surrogate model, and evaluate its performance across a diverse range of BO settings. Experimental results suggest that BO-pro-c maintains competitive optimisation performance while achieving a 0.9% reduction in simple regret and a 39.4% reduction in computational overhead relative to a BO algorithm based on a single global GP model.

0.40