CS Paper Radar

Reliability-Constrained Hybrid Beamforming for Multistatic ISAC in Vehicular Networks

Congcong Liu, Junhui Zhao, Xiaoming Wang, Dongming Wang

eess.SY ·submitted 2026-08-17 08:50 UTC · v1

Abstract

This letter investigates reliability constrained hybrid beamforming for transceiver separated multistatic integrated sensing and communication in vehicular networks. A target position Cramer Rao bound minimization problem is formulated under outage probability, transmit-power, and analog constant modulus constraints. To handle the constrained non convex problem, we develop a proportional-integral Lagrangian proximal policy optimization algorithm. Simulation results show that the proposed algorithm keeps the average outage probability at or below the reliability threshold, around 8%-10%, improves constraint satisfaction, and achieves stable sensing performance.

Comment
4 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Cooperative Target Localization in RIS-Enabled ISAC Systems

eess.SP ·2026-09-30 ·Rouhollah Amiri, Abdollah Ajorloo, Mohammad Mahdi Mojahedian, Ahmad Reza Hassanshahi, Fabiola Colone
similarity 0.61
Abstract

This paper develops a cooperative integrated sensing and communication (ISAC) framework in which a multi-antenna base station (BS) simultaneously localizes a target and serves multiple communication users, a subset of which is equipped with reconfigurable intelligent surfaces (RISs). The Fisher information matrix (FIM) for target positioning is derived, explicitly characterizing its dependence on the BS beamforming coefficients, RIS phase profiles, and bistatic sensing geometry. Under the stated scaling assumptions, coherent RIS phase alignment yields a Fisher-information gain that scales quadratically with the number of RIS elements, whereas independent random phases provide a linear gain in expectation. We formulate a sensing-centric joint active and passive beamforming problem that minimizes the position error bound (PEB) subject to per-user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. The resulting non-convex problem is addressed through an iterative successive convex approximation (SCA) procedure that solves a sequence of convex subproblems. We further develop a target localization estimator that fuses one direct time-of-arrival (ToA) measurement, one angle-of-arrival (AoA) measurement, and multiple RIS-assisted indirect ToA measurements. Under small measurement errors and asymptotically efficient first-stage ToA/AoA estimation, the estimator covariance approaches the Cramér--Rao bound (CRB) to first order. Numerical results validate the analytical scaling laws and demonstrate the localization gains enabled by cooperative RIS-equipped users.

0.13

Resource allocation in Distributed ISAC Systems: A Location Sensitive Mode Selection and Task Assignment Framework

eess.SP ·2026-09-30 ·Kwadwo Mensah Obeng Afrane, André B. J. Kokkeler, Yang Miao
theory similarity 0.61
Abstract

In this work we propose a region of interest (ROI)-aware mode selection and task assignment (RAMSTA) framework for distributed integrated sensing and communication (ISAC) systems. In realistic ISAC use-cases, the sensing performance requirement can be location dependent. Vehicular targets at a traffic intersection, unmanned aerial vehicle approaching a restricted airspace or a sparsely populated areas may require different levels of detection or localization accuracy. This warrants the design of location sensitive resource allocation to account for the varying sensing performance requirements. Thus, we design a sigmoid-based ROI proximity parameter to tune the communication-sensing trade-off in a weighted sum rate and position posterior Cramér-Rao lower bound minimization problem. The resulting mixed-integer non-linear program is solved by applying a penalized convex-concave procedure. We show that the ROI sensitivity thresholds allows the adaptive variation of the communication-sensing trade-off with respect to the predicted location of the target and relative to a predefined ROI.

0.28

Massive MIMO ISAC Under Target-Angle Uncertainty: CRLB Outage Analysis and Robust Resource Allocation

eess.SP ·2026-09-16 ·Smriti Uniyal, Tianyu Fang, Van-Dinh Nguyen, Hien Quoc Ngo, Markku Juntti +1 more
similarity 0.59
Abstract

In integrated sensing and communications (ISAC), the same spectral and hardware resources are shared for two functionalities. Most ISAC designs assume perfect target-angle information neglecting angle estimation errors, which introduce steering-vector mismatches, degrade sensing accuracy, and may invalidate deterministic sensing guarantees. This paper investigates monostatic massive multiple-input-multiple-output (MIMO) ISAC systems under imperfect target-angle estimates. We derive closed-form expressions for the Cramér-Rao lower bounds (CRLBs) of target azimuth and elevation estimates in the presence of angle uncertainty. We characterize the cumulative distribution functions and outage probabilities of the CRLBs under Gaussian, generalized uniform, and von Mises angle-error models. Our analysis reveals that, in the small-error regime, the CRLBs increase quadratically with the angle errors due to transmit steering-vector mismatch. To ensure reliable sensing, we propose a robust power allocation framework that jointly optimizes pilot training and communications/sensing transmission powers to maximize the communications sum rate while satisfying CRLB outage constraints. The resulting nonconvex problem is solved using an alternating-optimization algorithm based on successive convex approximation. Numerical results validate the developed analysis and show that the proposed robust design reduces azimuth and elevation CRLB outage probabilities by up to $60\%$ compared with conventional non-robust schemes. It attains up to $45\%$ higher sum rates than the non-robust design under strict CRLB thresholds.

0.20

Joint Association and Beamforming Design for Cooperative ISAC Systems

eess.SP ·2026-11-04 ·Abhishek Rajasekaran, Mehdi Karbalayghareh, Xiaoyan Ma, David J. Love, Christopher G. Brinton
theory similarity 0.58
Abstract · 6 pages, 5 figures

Cooperation among multiple base stations (BSs) improves both communication and sensing in integrated sensing and communication (ISAC) networks. However, it requires deciding which BSs serve each communication user (CU) and each target, and how each BS beamforms. In this work, we consider joint BS-CU and BS-target association, and beamforming for a general cooperative ISAC system, overcoming prior simplifications such as single-user or target setups, fixed BS roles, coherent radar or separate waveforms. We maximize a joint communication rate and position Cramer-Rao lower bound (CRLB) based tradeoff utility while guaranteeing a minimum service per-CU using a data queue model. We develop a successive convex approximation (SCA)-based beamforming with closed-form updates. The discrete association problem is solved as an overarching layer using a low-complexity algorithm. Numerical results validate the effectiveness of the algorithm and unveil benefits of cooperative communication and sensing.

0.26

Certified Dynamic Subspace Optimization for Bayesian ISAC Design

eess.SP ·2026-11-12 ·Zongyao Zhao, Cheng-Jie Zhao, Zhaolin Wang, Qingjiang Shi, Yuanwei Liu
similarity 0.58
Abstract · 19 pages, 10 figures, submitted to IEEE journal

Full-space covariance optimization is costly in large-array Bayesian integrated sensing and communication (ISAC). A fixed transmit subspace can reduce this cost, but the resulting optimality loss depends on the posterior distribution. In this paper, a certified dynamic subspace method is developed for angle Bayesian Cramér-Rao bound (BCRB) minimization under joint angle and complex-gain uncertainty. For uniform linear arrays, exact response preservation over a nondegenerate posterior angular interval requires the full antenna space. Subspace sufficiency is therefore assessed through full-space objective-gap bounds. A communication-feasible basis is initialized from the user-channel span and local BCRB sensitivity. Restricted semidefinite programs are then solved. Primal restoration and dual repair yield gap bounds that remain valid after lossless user-beam recovery. When an accurate restricted solve does not certify the requested tolerance, the basis is expanded using a direction identified from the covariance dual slacks. Under a strict communication-power margin, joint uniqueness of the restricted optimal dual multipliers is established. With exact restricted solves, this uniqueness guarantees strict BCRB improvement after certificate-driven expansion. Numerical results validate the bounds against full-space references for the sampled problems. Compared with a fixed Fisher ordering, the proposed method can reach the same certificate target with fewer dimensions. On large arrays, total runtime is reduced relative to the full-space and factorized baselines at matched certificate targets.

0.25

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.58
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.58
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

Resilience in Wireless: A Lyapunov-Constrained Integrated Sensing, Communication, and Control Approach

eess.SP ·2026-10-23 ·Yifan Ge, Ningyan Guo, Yuanhao Cui, Dingyou Ma, Zhiyong Feng +1 more
similarity 0.58
Abstract · 13 pages

Traditional wireless networks mainly use reliability metrics to evaluate network stability. However, reliable data delivery alone cannot fully characterize network stability under variations in wireless environments and physical tasks. Wireless network resilience provides a broader perspective by describing the ability to maintain acceptable service and recover from disruptions. We develop an integrated sensing, communication, and control (ISCC) framework that incorporates communication reliability and sensing error into a state-dependent Lyapunov constraint for adaptive BS beamforming. The resulting transmit-power minimization problem is non-convex and solved via semidefinite relaxation and successive convex approximation with rank-one recovery. We establish conditional mean-square ultimate boundedness, while simulations demonstrate improved resilience and faster recovery over a static baseline.

0.25