CS Paper Radar

Reasoning-supported Robustness Validation of Automotive E/E Components

Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel

cs.AI ·submitted 2026-08-17 11:19 UTC · v2
published

Abstract

This article presents an ontology-supported approach to tackle the complexity of the Robustness Validation (RV) process of automotive electrical/electronic (E/E) components. The approach uses formalized knowledge from the RV process and stress, operating, and load profiles, so-called Mission Profiles (MPs). In contrast to the error-prone industrially established manual procedure, we show how component characteristics are formalized in OWL in order to form the foundation of an efficient automated analysis selection and decision support during the RV process. Additionally, a rule-based transformation of component characteristics upon propagation via SWRL is described. The proposed approach is based on the idea of mapping MPs to an OWL representation in order to allow to execute semantic queries against MP data to improve their integration into the RV process. The resulting ontology-supported application framework has been applied to an industrial use-case from automotive power electronics. A generalization of the approach is described and demonstrated by applying it to stress test selection within the AEC Q100 standard. We present experimental results showing that the RV process can be significantly improved in terms of reduced design time and increased exhaustiveness by automating the analyses selection step and the provisioning of all the relevant data to be used.

Comment
Substantially extended journal version of the ICSC 2017 paper. Adds PMML integration, mounting-point normalization, SWRL-based value propagation and EMI threshold checking, and AEC-Q100 stress-test and process-change qualification
Journal ref
International Journal of Semantic Computing, Vol. 11, No. 4, pp. 473-496, 2017
DOI
10.1142/S1793351X17400190

Closest papers

Nearest neighbours by meaning across the whole index.

Ontology-supported Design Parameter Management for Change Impact Analysis

cs.SE ·2026-08-22 ·Jan Novacek, Ali Ahari, Alessandro Cornaglia, Frederik Haxel, Alexander Viehl +2 more
published similarity 0.69
Abstract · Published in: 2018 44th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)

This paper presents an ontology-supported approach to the management of design parameters in engineering. This approach aims specifically at enabling Change Impact Analysis through Requirements Traceability and acquainted expert knowledge of design parameters. The approach is suitable for both software and hardware designs. The activities and features are mainly obtained by (1) the application of an ontology-based universal system modeling procedure proposal for model integration, (2) the utilization of a knowledge base for capturing expert knowledge and (3) a semantic Mission Profile Aware Design platform. OWL is used to represent information and the underlying data model can improve knowledge transfer among heterogeneous systems which are common in complex engineering projects. At the same time, effort to perform reasoning on such models can be reduced. A demonstration and hands-on description of two illustrative use cases complements the paper.

0.57

Ontology-based Requirements Transformation

cs.SE ·2026-08-22 ·Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel
published similarity 0.64
Abstract · Published in: 2019 International Symposium on Systems Engineering (ISSE)

This paper presents an ontology-based approach to the supply chain-aware transformation of functional and environmental load requirements given by so-called Mission Profiles (MPs). The approach aims at improving the efficiency of the engineering process through supporting the transformation process and enabling a better integration of the transformation into existing Model-based Systems Engineering (MBSE) processes. We propose a methodology and a supporting system which aids in the transformation process while the latter feature is obtained by constructing and working on models. Consequent utilization of the standardized language OWL to express model representations further enables better knowledge integration and transfer among hetero-geneous systems. In addition to that, this favors knowledge reuse across projects which can reduce overall costs. Moreover, the system enables stripping off irrelevant information from MPs, thus improving protection of intellectual property.

0.59

Ontology-Mediated Neurosymbolic Constraint Acquisition from Multiple Stakeholders

cs.AI ·2026-09-24 ·Stefan Bischof, Juliana Kainz, Danilo Valerio
published similarity 0.61
Abstract · Accepted for KG-NeSy Workshop, co-located with ISWC 2026

Neurosymbolic research typically assumes a pre-existing symbolic specification, leaving the upstream challenge of acquiring and formalizing requirements and constraints largely unaddressed. We present an architecture that fills this gap by using an OWL configuration ontology to mediate between neural constraint sources and downstream consumers. In this framework, LLM assistants elicit soft stakeholder preferences, while hardware specifications define hard physical and engineering limits. The ontology unifies these heterogeneous inputs, leverages description logic to identify unsatisfiability, and generates symbolic explanations that enable LLMs to interactively renegotiate terms with users. Any remaining conflicts are resolved downstream via priority-based relaxation. We illustrate our approach on a microgrid use case from the FLEXI project and argue its generalizability to multi-stakeholder domains where constraint acquisition is distributed across human and automated sources of unequal authority.

0.45

Constructing Dynamic Master Logic Models as Knowledge Graphs for Complex System Diagnostics Using Retrieval-Augmented Large Language Models

cs.AI ·2026-08-12 ·Saman Marandi, Yu-Shu Hu, Mohammad Modarres
similarity 0.60
Abstract · 36 Pages, 8 Figures

Dynamic Master Logic (DML) provides a hierarchical framework for representing system behavior by linking functional objectives to underlying structural elements. However, DML construction typically relies on expert interpretation of technical documentation, limiting scalability for complex systems. This study presents a framework for automated construction of DML models from system descriptions and their representation as Knowledge Graphs (KG-DML), using Retrieval-Augmented Generation and Large Language Models as enabling tools. Building on prior work with small-scale systems, the framework extends automated KG-DML construction and evaluation to substantially larger and more complex systems. Model construction proceeds across the DML hierarchy using targeted retrieval while preserving functional dependencies and explicit logical relationships. The resulting KG-DML supports diagnostic reasoning, safety assessment, upward failure propagation, and downward dependency tracing. A multi-level validation methodology evaluates layer-specific precision and recall, logical gate consistency, and overall structural integrity. Application to the Low-Pressure Coolant Injection system of a decommissioned Boiling Water Reactor demonstrates consistent reconstruction across repeated runs. The results show that automated KG-DML construction can transform technical documentation into executable functional models for diagnostic and reliability analysis.

0.10

Chain of Physics: Supporting Fault Diagnosis with Engineering-Inspired Large Language Model Reasoning

cs.LG eess.SP ·2026-11-10 ·Wenqi Zhou, Leonardo Baldo, Kai Goebel, Manuel Arias Chao
benchmark similarity 0.59
Abstract

Fault diagnosis in complex systems requires linking observed changes in physical quantities to the failure mechanisms that produce them. Experienced engineers perform this task by combining sensor information with knowledge of system behavior and fault propagation. Large Language Models (LLMs) can support this process, but their diagnostic reasoning depends on the availability of asset-specific engineering knowledge and on how this knowledge is represented and used during inference. This work introduces Chain of Physics (CoP), an LLM-based fault-diagnosis framework built around a Constrained Knowledge Graph (CKG) generated automatically from asset-specific reference documentation. CoP addresses failure-sensor association from textual engineering knowledge. The CKG stores diagnostic chains connecting failure modes, changes in physical quantities, and monitoring sensors. During inference, semantically similar graph paths are retrieved for each question and used as both information and in-context examples for the reasoning process. Candidate failure modes are extracted from the question and analysed independently through dedicated LLM calls, which generate plausible failure-to-observation chains. A final decision module compares these chains with the available answer choices. CoP is evaluated on the FailureSensorIQ benchmark across four industrial asset classes and three LLMs. Compared with direct prompting and conventional Retrieval-Augmented Generation (RAG), CoP improves diagnostic accuracy across all evaluated models, with gains ranging from 7.8 to 19.6 percentage points and from 11.7 to 18.2 percentage points, respectively. The results show that structured engineering knowledge can improve LLM-based diagnostic reasoning when graph retrieval is combined with in-context examples of fault propagation.

0.17

Towards Cyber-Physical Cognition: A Unified Ontology-Driven Knowledge Graph for Real-Time Autonomous Grid Operations

eess.SY ·2026-08-17 ·Sathvik Sankaranarayanan, Michael Mandulak, Ibrahim Shahbaz, Eman Hammad
published similarity 0.59
Abstract · Accepted author manuscript at the IEEE Annual Conference of the Industrial Electronics Society (IEEE IECON 2026). This version has been acce…

Modern power systems and smart grids are often composed of fragmented and heterogeneous data silos, which lack the cohesion needed for effective cross-domain analysis. For this, this paper introduces a universal ontology framework for the operational representation of intelligent cyber-physical power systems via a unified knowledge graph and an ontology capable of cross-domain reasoning. This work focuses on bridging cyber-physical simulators as a stepping stone towards that vision. By establishing a unified semantic middleware grounded in IEC 61970 (CIM) and IEC 62351/61850 standards, this framework integrates disparate cyber and physical simulation environments, illustrated via OMNeT++ and PowerWorld, into a single knowledge graph. Evaluation across three standard power system benchmarks demonstrates sub-linear scaling in both knowledge graph size and construction time. We further validate the framework's efficacy for real-time decision support, achieving millisecond-level query performance across both domains, maintained across six cumulative structural mutations to the knowledge graph. The resulting unified knowledge graph provides a robust, scalable information corpus for autonomous smart grid operations, enabling complex analysis of real-world power systems.

0.20

Semantic Graph Unification for Industrial Digital Threads: Bridging 11 Heterogeneous Manufacturing Systems Through Ontology-Driven Knowledge Graphs

cs.AI ·2026-08-11 ·Grama Chethan
similarity 0.58
Abstract

Modern manufacturing enterprises operate heterogeneous systems -- ERP, MES, PLM, SCADA, QMS, SCM -- each with its own data model and API. The resulting silos prevent holistic analysis, delay root-cause investigation, and obstruct Industry 4.0 traceability. Point-to-point integration scales as O(n^2) and accumulates brittle dependencies. This paper presents an open framework for semantic graph unification of industrial digital threads. An ontology-driven RDF knowledge graph unifies data from 11 simulated sources across nine domains through a five-stage ETL pipeline with automated entity resolution spanning 97 owl:sameAs identity links. The ontology encompasses 78 RDFS classes, 108 object properties, and 243 data properties, drawing on ISA-95, OPC UA, eClass, the Asset Administration Shell, RAMI 4.0, and additional standards. An automated discovery engine applies nine strategy categories -- cross-station correlation, alarm coverage, ECN impact, CUSUM/EWMA drift detection -- to surface insights spanning system boundaries. The primary empirical result: blocking 24 cross-system tools reduces recall from 1.00 to 0.31 (F1 from 1.00 to 0.48), showing that 69% of discoverable signals require cross-system graph joins. Leave-one-out ablation confirms six of nine strategies contribute unique signals. Verification against a 65-signal manifest (16 positive, 49 null) yields F1 = 1.00 (95% Clopper-Pearson CI [0.79, 1.00]); as the manifest was author-constructed, this constitutes verification not independent validation. The graph is exposed to LLM agents via 287 Model Context Protocol tools as a SPARQL-native semantic layer. Five industry templates (aerospace, CPG, pharma, medical devices, turbine blades) demonstrate schema stability across manufacturing verticals.

0.04

Narrow and Deep: An Ontology Tower as the Knowledge of an LLM Agent for an Industrial Equipment System

eess.SY cs.AI ·2026-10-08 ·Younghwan Joo, Sung-il Kim
similarity 0.55
Abstract · 28 pages, 6 figures, 3 tables

Large language model (LLM) agents are beginning to operate industrial energy equipment, and what they get right depends on what they are told about the plant. Established building ontologies name many kinds of points across many sites, whereas an industrial equipment system needs few entities with much knowledge about each. This study proposes the ontology tower, a narrow-and-deep ontology of a single equipment system whose knowledge deepens in two ways: through quantities derived from the measured points by physical relations, and through lessons from the operating journal incorporated as knowledge nodes. On a real low-humidity air-handling test plant operated daily through a programmable logic controller, agents received a text projected from its tower in a preregistered evaluation of nine tasks replayed from the plant's records, using four open-weight models from 9 to about 750 billion parameters. This knowledge raised the rate at which the agents avoided the most plausible misjudgment of each task by about 20 percentage points, and the overall task score of the 9-billion-parameter model as much as that of the largest. Operating lessons were used when incorporated into the tower or placed in the prompt as records, but seldom when left in the journal behind a search tool. In live runs through an invariant safety layer, the agents brought the controlled variable into its target band in 12 of 14 runs. An ontology narrow in entities but deep in what is known about them can thus supply the knowledge that an agent for an industrial equipment system needs.

0.25