CS Paper Radar

Ontology-Mediated Neurosymbolic Constraint Acquisition from Multiple Stakeholders

Stefan Bischof, Juliana Kainz, Danilo Valerio

cs.AI ·submitted 2026-09-24 14:28 UTC · v1
published

Abstract

Neurosymbolic research typically assumes a pre-existing symbolic specification, leaving the upstream challenge of acquiring and formalizing requirements and constraints largely unaddressed. We present an architecture that fills this gap by using an OWL configuration ontology to mediate between neural constraint sources and downstream consumers. In this framework, LLM assistants elicit soft stakeholder preferences, while hardware specifications define hard physical and engineering limits. The ontology unifies these heterogeneous inputs, leverages description logic to identify unsatisfiability, and generates symbolic explanations that enable LLMs to interactively renegotiate terms with users. Any remaining conflicts are resolved downstream via priority-based relaxation. We illustrate our approach on a microgrid use case from the FLEXI project and argue its generalizability to multi-stakeholder domains where constraint acquisition is distributed across human and automated sources of unequal authority.

Comment
Accepted for KG-NeSy Workshop, co-located with ISWC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Reasoning-supported Robustness Validation of Automotive E/E Components

cs.AI ·2026-08-17 ·Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel
published similarity 0.61
Abstract · Substantially extended journal version of the ICSC 2017 paper. Adds PMML integration, mounting-point normalization, SWRL-based value propaga…

This article presents an ontology-supported approach to tackle the complexity of the Robustness Validation (RV) process of automotive electrical/electronic (E/E) components. The approach uses formalized knowledge from the RV process and stress, operating, and load profiles, so-called Mission Profiles (MPs). In contrast to the error-prone industrially established manual procedure, we show how component characteristics are formalized in OWL in order to form the foundation of an efficient automated analysis selection and decision support during the RV process. Additionally, a rule-based transformation of component characteristics upon propagation via SWRL is described. The proposed approach is based on the idea of mapping MPs to an OWL representation in order to allow to execute semantic queries against MP data to improve their integration into the RV process. The resulting ontology-supported application framework has been applied to an industrial use-case from automotive power electronics. A generalization of the approach is described and demonstrated by applying it to stress test selection within the AEC Q100 standard. We present experimental results showing that the RV process can be significantly improved in terms of reduced design time and increased exhaustiveness by automating the analyses selection step and the provisioning of all the relevant data to be used.

0.66

Towards Cyber-Physical Cognition: A Unified Ontology-Driven Knowledge Graph for Real-Time Autonomous Grid Operations

eess.SY ·2026-08-17 ·Sathvik Sankaranarayanan, Michael Mandulak, Ibrahim Shahbaz, Eman Hammad
published similarity 0.60
Abstract · Accepted author manuscript at the IEEE Annual Conference of the Industrial Electronics Society (IEEE IECON 2026). This version has been acce…

Modern power systems and smart grids are often composed of fragmented and heterogeneous data silos, which lack the cohesion needed for effective cross-domain analysis. For this, this paper introduces a universal ontology framework for the operational representation of intelligent cyber-physical power systems via a unified knowledge graph and an ontology capable of cross-domain reasoning. This work focuses on bridging cyber-physical simulators as a stepping stone towards that vision. By establishing a unified semantic middleware grounded in IEC 61970 (CIM) and IEC 62351/61850 standards, this framework integrates disparate cyber and physical simulation environments, illustrated via OMNeT++ and PowerWorld, into a single knowledge graph. Evaluation across three standard power system benchmarks demonstrates sub-linear scaling in both knowledge graph size and construction time. We further validate the framework's efficacy for real-time decision support, achieving millisecond-level query performance across both domains, maintained across six cumulative structural mutations to the knowledge graph. The resulting unified knowledge graph provides a robust, scalable information corpus for autonomous smart grid operations, enabling complex analysis of real-world power systems.

0.20

Constraint-Driven Context Engineering: Designing Domain Interfaces for AI Systems

cs.SE cs.AI ·2026-09-23 ·Xiwei Xu, Chen Wang, Mengmeng Yang, Yipeng Zhang, Jacky Jiang +4 more
similarity 0.59
Abstract · submitted to conference

Generative AI systems are increasingly deployed to address domain problems. These systems operate under technical, regulatory, institutional, and normative constraints that define acceptable AI behaviour and outcomes within their domains. We observe a recurring pattern in our industry engagement: partners often arrive with a functioning but relatively generic AI solution. The challenge is no longer to build an AI system from scratch, but to improve the quality and domain appropriateness of an AI-generated solution. In these settings, the limiting factor is often the quality, scope, and structure of the context available to the system. Yet, existing context engineering approaches primarily focus on supplying domain knowledge through retrieval, memory, and tools, with limited support for systematically identifying and operationalising the constraints that govern AI systems in their operational environments. This paper proposes Constraint-Driven Context Engineering (CDCE), a design approach for engineering domain interfaces for AI systems. Drawing on software architecture design and Domain-Driven Design (DDD), CDCE treats domain constraints as first-class design drivers. It identifies and characterises constraints, determines the required context assets, and designs representations through which these assets are made available to AI systems. We conducted a comparative multiple-case study with industry and public-sector partners across educational assessment, healthcare decision support, and financial-distress prediction. Depending on their characteristics, constraints can guide AI behaviour, enforce permissible boundaries, or support verification of AI-generated outcomes. The cases demonstrate CDCE's applicability across contrasting domains and show how constraint characteristics shape the resulting domain interfaces.

0.15

Neuro-symbolic AI for Industrial Configuration

cs.AI ·2026-09-24 ·Danilo Valerio, Philipp Kogler, Stefan Bischof, Thomas Hubauer, Huzefa Rangwala
publishedposition similarity 0.59
Abstract · Accepted at the Industrial Track at the NeSy Conference 2026

Large Language Models (LLMs) have shown impressive performance on a wide range of generative tasks. Yet their probabilistic nature makes them, in isolation, fundamentally unsuited for industrial product configuration, where outputs must be syntactically valid, semantically consistent with a knowledge base of hundreds of features and rules, and producible by an existing manufacturing chain. We argue that Neuro-symbolic (NeSy) AI methods lay out a promising path towards industrial-grade configurators that are reliable by design, explainable, and trustworthy. This paper describes a taxonomy of three NeSy integration strategies, namely hybrid inference, hybrid fine-tuning, and hybrid training, exploring their usage in the configuration domain. We report our effort to operationalize NeSy concepts in an industrial configuration copilot and derive a set of practical design choices for deploying trustworthy AI in engineering environments. We close with a discussion of open research challenges we consider most pressing, in particular how to scale NeSy methods from small academic demonstrators to the size of industrial configurators.

0.23

Ontology-based Requirements Transformation

cs.SE ·2026-08-22 ·Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel
published similarity 0.59
Abstract · Published in: 2019 International Symposium on Systems Engineering (ISSE)

This paper presents an ontology-based approach to the supply chain-aware transformation of functional and environmental load requirements given by so-called Mission Profiles (MPs). The approach aims at improving the efficiency of the engineering process through supporting the transformation process and enabling a better integration of the transformation into existing Model-based Systems Engineering (MBSE) processes. We propose a methodology and a supporting system which aids in the transformation process while the latter feature is obtained by constructing and working on models. Consequent utilization of the standardized language OWL to express model representations further enables better knowledge integration and transfer among hetero-geneous systems. In addition to that, this favors knowledge reuse across projects which can reduce overall costs. Moreover, the system enables stripping off irrelevant information from MPs, thus improving protection of intellectual property.

0.60

An Agentic Framework for Automated Power System Studies and Grid Connection Assessment

cs.AI ·2026-11-02 ·MaoXun Huang, Kshitij Kapoor, Eli Louise
benchmark similarity 0.58
Abstract · 8 pages for the main paper with 6 pages for Appendix

Connecting new generation and demand to the grid depends on two scarce skills: checking applications against a large, changing body of regulation, and running the network studies that decide where and how a project connects. We present Grid Agents, an AI system that brings both together, and the methodology we use to evaluate it. The Grid Ontology is its knowledge system. It represents the regulation, standards and engineering knowledge that grid work depends on, makes it searchable, and evolves as the agents learn from use. Every answer drawn from it rests on evidence the agents cite. Grid Studio is an agent system specialised for power-system engineering. It works in its own engineering environment with domain tools and a study framework, draws on the Grid Ontology, and relies on established solvers for every number it reports. In both, engineers make the decisions. We bring eight published power-system benchmark families, previously scattered across separate papers, into one suite of 519 tasks, and we verify not only each answer but the work behind it, by replaying the agent's tool calls. The Grid Ontology cites the right regulatory evidence more often than a general coding agent or retrieval pipelines, leads on LegalBench-RAG and ranks first on the public leaderboards of the Enterprise RAG Challenge and ViDoRe V3. Grid Studio scores highest on the 519 power-system tasks and is the fastest of all the systems we compare, both by a statistically significant margin. With an optimiser in the loop, its reinforcement packages cost 33-67% less on average than those the agent designs alone.

0.11

Auto-Formalizing Neuro-Symbolic Predictors

cs.LG cs.AI ·2026-10-01 ·Samuele Bortolotti, Weixin Chen, Han Zhao, Andrea Passerini, Stefano Teso +1 more
benchmarkcode/data similarity 0.57
Abstract

Neuro-Symbolic (NeSy) predictors incorporate prior knowledge into the prediction process of neural networks, ensuring that outputs satisfy specified constraints, making them particularly suitable for high-stakes applications where compliance with domain knowledge is essential. A key bottleneck in this paradigm is the acquisition of symbolic constraints: encoding domain knowledge into logical formulas remains a manual and expert-intensive process. In this work, we investigate the extent to which auto-formalization via LLMs can systematically translate textual knowledge into symbolic knowledge that can be plugged into NeSy predictors. To this end, we introduce auto-nesy-bench, a new benchmark for evaluating constraint formalization and its impact on downstream accuracy of NeSy predictors. Through an extensive evaluation across several domains, we find that LLMs can formalize constraints to a meaningful extent, generating formulas that are often similar to those provided by human experts. Moreover, when the generated formulas are syntactically valid, they can lead to high-quality downstream predictions. The code and benchmark are available at https://unitn-sml.github.io/auto-nesy-bench/.

0.24

Ontology-supported Design Parameter Management for Change Impact Analysis

cs.SE ·2026-08-22 ·Jan Novacek, Ali Ahari, Alessandro Cornaglia, Frederik Haxel, Alexander Viehl +2 more
published similarity 0.57
Abstract · Published in: 2018 44th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)

This paper presents an ontology-supported approach to the management of design parameters in engineering. This approach aims specifically at enabling Change Impact Analysis through Requirements Traceability and acquainted expert knowledge of design parameters. The approach is suitable for both software and hardware designs. The activities and features are mainly obtained by (1) the application of an ontology-based universal system modeling procedure proposal for model integration, (2) the utilization of a knowledge base for capturing expert knowledge and (3) a semantic Mission Profile Aware Design platform. OWL is used to represent information and the underlying data model can improve knowledge transfer among heterogeneous systems which are common in complex engineering projects. At the same time, effort to perform reasoning on such models can be reduced. A demonstration and hands-on description of two illustrative use cases complements the paper.

0.57