CS Paper Radar

Ontology-supported Design Parameter Management for Change Impact Analysis

Jan Novacek, Ali Ahari, Alessandro Cornaglia, Frederik Haxel, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel

cs.SE ·submitted 2026-08-22 13:25 UTC · v1
published

Abstract

This paper presents an ontology-supported approach to the management of design parameters in engineering. This approach aims specifically at enabling Change Impact Analysis through Requirements Traceability and acquainted expert knowledge of design parameters. The approach is suitable for both software and hardware designs. The activities and features are mainly obtained by (1) the application of an ontology-based universal system modeling procedure proposal for model integration, (2) the utilization of a knowledge base for capturing expert knowledge and (3) a semantic Mission Profile Aware Design platform. OWL is used to represent information and the underlying data model can improve knowledge transfer among heterogeneous systems which are common in complex engineering projects. At the same time, effort to perform reasoning on such models can be reduced. A demonstration and hands-on description of two illustrative use cases complements the paper.

Comment
Published in: 2018 44th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)
Journal ref
2018 44th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), Prague, Czech Republic, 2018, pp. 9-16
DOI
10.1109/SEAA.2018.00011

Closest papers

Nearest neighbours by meaning across the whole index.

Ontology-based Requirements Transformation

cs.SE ·2026-08-22 ·Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel
published similarity 0.79
Abstract · Published in: 2019 International Symposium on Systems Engineering (ISSE)

This paper presents an ontology-based approach to the supply chain-aware transformation of functional and environmental load requirements given by so-called Mission Profiles (MPs). The approach aims at improving the efficiency of the engineering process through supporting the transformation process and enabling a better integration of the transformation into existing Model-based Systems Engineering (MBSE) processes. We propose a methodology and a supporting system which aids in the transformation process while the latter feature is obtained by constructing and working on models. Consequent utilization of the standardized language OWL to express model representations further enables better knowledge integration and transfer among hetero-geneous systems. In addition to that, this favors knowledge reuse across projects which can reduce overall costs. Moreover, the system enables stripping off irrelevant information from MPs, thus improving protection of intellectual property.

0.60

Reasoning-supported Robustness Validation of Automotive E/E Components

cs.AI ·2026-08-17 ·Jan Novacek, Alexander Viehl, Oliver Bringmann, Wolfgang Rosenstiel
published similarity 0.69
Abstract · Substantially extended journal version of the ICSC 2017 paper. Adds PMML integration, mounting-point normalization, SWRL-based value propaga…

This article presents an ontology-supported approach to tackle the complexity of the Robustness Validation (RV) process of automotive electrical/electronic (E/E) components. The approach uses formalized knowledge from the RV process and stress, operating, and load profiles, so-called Mission Profiles (MPs). In contrast to the error-prone industrially established manual procedure, we show how component characteristics are formalized in OWL in order to form the foundation of an efficient automated analysis selection and decision support during the RV process. Additionally, a rule-based transformation of component characteristics upon propagation via SWRL is described. The proposed approach is based on the idea of mapping MPs to an OWL representation in order to allow to execute semantic queries against MP data to improve their integration into the RV process. The resulting ontology-supported application framework has been applied to an industrial use-case from automotive power electronics. A generalization of the approach is described and demonstrated by applying it to stress test selection within the AEC Q100 standard. We present experimental results showing that the RV process can be significantly improved in terms of reduced design time and increased exhaustiveness by automating the analyses selection step and the provisioning of all the relevant data to be used.

0.66

Ontology of Software Maintenance

cs.SE ·2026-11-18 ·Luis Olsina, Pablo Becker, Maria Fernanda Papa
similarity 0.60
Abstract · 10 pages, 3 figures, and 2 tables

Software maintenance is often a long and costly phase of the software lifecycle, encompassing activities such as defect correction, adaptation, code improvement, and functionality enhancement. Conceptual inconsistencies and terminological variation continue to hinder effective communication among researchers and practitioners. To address this gap, this paper presents the Software Maintenance Top-Domain Ontology (SwMaintTDO), a high-domain ontology developed within a five-tier ontological architecture. This ontology was constructed using competency questions, ontological analysis of documented maintenance processes, artifacts, and resources, and alignment with established software engineering standards. SwMaintTDO provides a unified and extensible conceptual model for representing key maintenance processes, roles, resources, artifacts, goal purposes, and the transition of target modifiable and context entities from current to updated maintenance situations. The applicability and value of SwMaintTDO are demonstrated through its application -via its concepts and relationships- to the process specification of a corrective maintenance strategy.

0.34

LLM-Assisted Workflow for Structural Difference Visualization in Evolving Software Requirements

cs.SE cs.HCcs.IR ·2026-09-23 ·Koi McFarland, Songhui Yue
top venue similarity 0.59
Abstract · \c{opyright} 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current…

This paper presents an LLM-assisted workflow for visualizing structural differences in evolving software require- ments. Implemented in the OntologyWeb environment, the work- flow represents baseline and current requirements as triple-based semantic graphs and supports side-by-side comparison of curated graph snapshots. The comparison view aligns matched entities and uses visual encoding to highlight structural changes.

0.63

Ontology-Mediated Neurosymbolic Constraint Acquisition from Multiple Stakeholders

cs.AI ·2026-09-24 ·Stefan Bischof, Juliana Kainz, Danilo Valerio
published similarity 0.57
Abstract · Accepted for KG-NeSy Workshop, co-located with ISWC 2026

Neurosymbolic research typically assumes a pre-existing symbolic specification, leaving the upstream challenge of acquiring and formalizing requirements and constraints largely unaddressed. We present an architecture that fills this gap by using an OWL configuration ontology to mediate between neural constraint sources and downstream consumers. In this framework, LLM assistants elicit soft stakeholder preferences, while hardware specifications define hard physical and engineering limits. The ontology unifies these heterogeneous inputs, leverages description logic to identify unsatisfiability, and generates symbolic explanations that enable LLMs to interactively renegotiate terms with users. Any remaining conflicts are resolved downstream via priority-based relaxation. We illustrate our approach on a microgrid use case from the FLEXI project and argue its generalizability to multi-stakeholder domains where constraint acquisition is distributed across human and automated sources of unequal authority.

0.45

Developing a Unified Verification and Validation Activity Standard at JPL

cs.SE eess.SY ·2026-09-23 ·Maximilian Vierlboeck, Ellen Van Wyk, Natalia Sanchez, Bogdan Oaida, Torrance James Eberhart +4 more
similarity 0.56
Abstract · 21 pages, 10 figures

Verification and validation practices (V&V) at NASA's Jet Propulsion Laboratory (JPL) have diverged over the past decade, creating fragmentation that increases overhead, reduces cross-project efficiencies, and inhibits institutional knowledge transfer. We present a unified V&V activity schema developed through human-centered design workshops involving 29 practitioners across multiple mission types and disciplines. The schema builds on a relationship-based architecture that allows for separating methods (Test, Analysis, Inspection, Demonstration, and Review of Design) while maintaining a common attribute set. Formalized as a platform-agnostic SysML model, the schema defines bidirectional relationships between requirements, V&V activities, venues, and evidence. Implementation in JPL's Jama platform demonstrates controlled customization through templates and modular item types, balancing rigor with agility while enabling automations, pattern reuse, and digital thread integration.

0.30

MARQ: A Modular, LLM-Agnostic Requirement Quality Assessor Infused with Systems Engineering Knowledge

cs.AI cs.SE ·2026-10-26 ·Jannatul Shefa, Alejandro Salado, Paul Wach, Taylan G. Topcu
similarity 0.56
Abstract

Requirements engineering (RE) is foundational to systems engineering (SE), as requirement defects can propagate downstream and adversely affect development outcomes. Although large language models (LLMs) are promising for requirement quality assessment, prior work shows that off-the-shelf models miss a large share of expert-identified defects, perform unevenly across quality criteria, and vary across executions. This study investigates whether infusing expert-derived SE knowledge can improve LLM-based requirement quality evaluation beyond off-the-shelf capability. We present MARQ, a modular, LLM-agnostic prototype that supplements LLMs with a criterion-specific knowledge stack operationalizing INCOSE requirement quality criteria and evaluated against off-the-shelf baselines on an expert-labeled NASA requirement set using Claude Opus 5, GPT-5.6 Sol, and the open-weight Gemma 3 12B, with 100 executions per model. MARQ achieves median F1 scores of 0.80 for Claude Opus 5, 0.62 for GPT-5.6 Sol, and 0.53 for Gemma 3 12B, compared with off-the-shelf baselines of 0.55, 0.52, and 0.18, respectively. However, the nature of these gains is model-dependent. Claude Opus 5 improves defect detection and false-alarm control; GPT-5.6 Sol gains detection and better execution-level consistency at the cost of more false alarms; and Gemma 3 12B reaches the performance of off-the-shelf proprietary models, although it remains highly variable. Criterion-level analysis shows gains concentrated in Correctness and Conformance, trade-offs between misses and false alarms within individual criteria, and model-dependent responses across several criteria. These findings position SE knowledge infusion as a promising model-agnostic pathway for strengthening trustworthy LLM-based RE support while underscoring the need for criterion-specific interventions and human-in-the-loop review.

0.04

Constructing Dynamic Master Logic Models as Knowledge Graphs for Complex System Diagnostics Using Retrieval-Augmented Large Language Models

cs.AI ·2026-08-12 ·Saman Marandi, Yu-Shu Hu, Mohammad Modarres
similarity 0.55
Abstract · 36 Pages, 8 Figures

Dynamic Master Logic (DML) provides a hierarchical framework for representing system behavior by linking functional objectives to underlying structural elements. However, DML construction typically relies on expert interpretation of technical documentation, limiting scalability for complex systems. This study presents a framework for automated construction of DML models from system descriptions and their representation as Knowledge Graphs (KG-DML), using Retrieval-Augmented Generation and Large Language Models as enabling tools. Building on prior work with small-scale systems, the framework extends automated KG-DML construction and evaluation to substantially larger and more complex systems. Model construction proceeds across the DML hierarchy using targeted retrieval while preserving functional dependencies and explicit logical relationships. The resulting KG-DML supports diagnostic reasoning, safety assessment, upward failure propagation, and downward dependency tracing. A multi-level validation methodology evaluates layer-specific precision and recall, logical gate consistency, and overall structural integrity. Application to the Low-Pressure Coolant Injection system of a decommissioned Boiling Water Reactor demonstrates consistent reconstruction across repeated runs. The results show that automated KG-DML construction can transform technical documentation into executable functional models for diagnostic and reliability analysis.

0.10