CS Paper Radar

GoalEvolve: From Handcrafted Algorithm Priors to Goal-Driven Evolution of Physical Design Algorithms

Haixu Liu, Lei Zhou, Yuhao Ren, Yumao Wu, Zhiang Wang

cs.AR cs.AI ·submitted 2026-08-17 15:45 UTC · v1

Abstract

Physical design algorithms operate within tightly coupled, multi-stage optimization flows, where stage-local gains may vanish or induce downstream degradation. Existing program-evolution frameworks often rely on stage-local objectives or undifferentiated multi-metric feedback, which neither guarantee better final results nor identify which unmet requirement should guide the next iteration. We present GoalEvolve, a goal-driven framework that makes physical design algorithm evolution accountable for the final quality of results (QoR) of the complete flow. Given a multi-objective QoR target region, GoalEvolve converts unmet requirements into normalized target gaps, identifies the dominant bottleneck, and uses stage-resolved checkpoint evidence to locate the responsible stage. An LLM-based Teacher then narrows the search to a relevant algorithmic decision and source region, while parallel Student agents implement and validate hypotheses through full-flow evaluation. Local effects, optimization debt, and downstream retention are retained as mechanism evidence for subsequent evolution. Across eight ASAP7 designs, GoalEvolve improves post-route TNS by 30.67% on average and reduces leakage and dynamic power by 21.18% and 9.42% versus default OpenROAD. Relative to commercial-tool goals, it closes 62.20% of the normalized power gap on power-dominant designs, surpasses the TNS goals on both timing-dominant designs, and closes 32.48% of the equal-weight timing-power gap on joint designs. Across all three designs evaluated against Codex goal mode under matched budgets, GoalEvolve further improves TNS by 26.46% while reducing leakage and dynamic power by 12.38% and 0.76%, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

Drift-Constrained Optimization: Only Direction Matters in Fine-Tuning Instruct Models

cs.AI ·2026-09-12 ·Fei Yuan, Changjiang Gao, Yilei Tu, Yifeng Liu, Shujian Huang +1 more
code/data similarity 0.61
Abstract

Fine-tuning instruct models often improves target performance while inducing behavioral drift from the reference model, which can degrade existing capabilities. Rather than treating this drift as an uncontrolled consequence of optimization, we specify a behavioral drift budget before optimization and ask how to boost the target-task performance within it. Locally, behavioral drift induces a shared geometry anchored at the reference model, with the drift budget defining a boundary within this space. In this space, drift determines distance from the reference, leaving update direction as the remaining degree of freedom. Fine-tuning updates can therefore be compared through their directional efficiency, naturally reformulating fine-tuning as a direction-selection problem. This reformulation makes a concrete prediction: changing the accessible directions can qualitatively alter the outcome of fine-tuning. We test this prediction in a stringent QA-only setting, where strong instruct models are fine-tuned only on final answers but must still generate multi-step reasoning at inference. Despite this mismatch, a coarse layer-selective probe reverses the failure of QA-only fine-tuning and reveals the existence of effective directions, with multiple neighboring configurations improving target performance while preserving reasoning and general capabilities. Across Qwen3-8B and Qwen3-14B, these directions substantially improve scientific reasoning and multilingual translation. Over more than 100 languages, the resulting models match or outperform dedicated translation systems and provide a stronger initialization for subsequent reinforcement learning. Our results suggest that fine-tuning is not just about how much a model changes, but how that change is spent. https://github.com/CONE-MT/DCO and https://huggingface.co/collections/LLaMAX/dco

0.45

OpenLayout: An Open and Agentic-Driven Platform for Holistic VLSI Physical Design and Benchmarking

cs.AR ·2026-11-13 ·Qiufeng Li, Sizhe Tang, Quan Cheng, Zirui Wang, Wantong Li +2 more
publishedbenchmarkpositioncode/data similarity 0.60
Abstract · Accepted by ICCAD2026

Physical design automation of very large-scale integrated circuits (VLSI) has made significant strides, progressing from single-stage placement and routing toward increasingly integrated full-flow implementation. Yet, existing approaches struggle with the vast design space optimization (DSO) arising from diverse technology nodes, circuit designs, and varied constraints. The substantial runtime of physical-design tools further exacerbates this challenge, leaving industrial workflows heavily dependent on experienced engineers to navigate the design space and achieve power, performance, and area (PPA) targets, incurring significant engineering effort. We argue that large language models (LLMs) with strong reasoning capabilities, enriched with distilled human design expertise, offer a promising path toward efficient and automated DSO. Unlike traditional algorithms, LLMs can interpret complex design contexts and naturally incorporate human expertise expressed in natural language for reasoning, acting, observing, and adapting throughout the design process, a capability that conventional optimization methods cannot exploit. To this end, we present OpenLayout, an agentic platform that leverages multi-agent collaboration with embedded design knowledge to enable self-iterative DSO. We further introduce OpenLayout-Bench, a benchmark targeting advanced technology nodes with commercial EDA tools to systematically evaluate physical design automation capabilities of LLMs. Experimental results demonstrate that OpenLayout achieves state-of-the-art performance, with approximately 20% accuracy improvement over baseline methods. Our work is open-sourced at https://github.com/fenggev56/OpenLayout

0.44

PROOF-Gen: From Optimized Data to Better Distillation

cs.AI cs.LG ·2026-08-24 ·Anh Ta, Junjie Zhu, Shahin Shayandeh
top venue similarity 0.60
Abstract

Supervised fine-tuning on teacher-generated trajectories is the standard first stage for distilling tool-calling capabilities into deployable models. Post-training pipelines that drive shipped tool-calling agents re-run this stage on a daily or weekly cadence, paying the frontier-teacher cost each cycle, yet the mechanism is generate-and-filter (keep the teacher's passing trajectories, discard the rest) and each cycle leaves behind the same hard scenarios because failures supply no signal. On τ2-bench, 57% of teacher trials fail, two-thirds of them near-misses (most tool calls correct, undone by one decisive error). We introduce PROOF-Gen (Per-scenario Reflective Optimization to Overcome FailedGeneration), which recovers golden trajectories from these failures via per-scenario prompt optimization. For each failed task, a reflector analyzes the execution trace and evaluation feedback, then writes corrective guidance that steers the teacher to a passing trajectory. The guidance is stripped before training, so the student learns from clean demonstrations with no task-specific scaffold. On τ2-bench, per-scenario optimization recovers 93% of failed scenarios. Fine-tuned on the combined data, Qwen3-4B-Instruct-2507 improves from Pass^1=0.132 to 0.529 and Gemma 4 E4B-it gains +7.2pp on BFCL v4 multi-turn. In a deployed pipeline, the method lifts trajectory quality by +6.3pp goal completion and transfers to a deployed on-device model (+1.5pp goal completion; +1.7 to +5.0pp across response-quality metrics), with positive transfer in every locale (non-English average +1.48pp).

0.37

Climbing the Design Ladder: Sequential Knowledge Distillation for Early-Stage Circuit Timing Prediction

cs.LG cs.AR ·2026-10-05 ·Reza Moravej, Fahad Rahman Amik, Zhanguang Zhang, Didier Chételat, Yingxue Zhang
similarity 0.60
Abstract

Integrated circuit design involves multiple design stages: logic synthesis, floorplanning, placement, and routing, with each stage taking hours to weeks to complete. Discovering timing violations late in this flow forces costly iterations back to earlier stages, wasting computational resources and delaying product launches. While predicting post-routing timing from early-stage data could prevent these failures, existing machine learning approaches struggle with the massive abstraction gap between post-synthesis logical descriptions and post-routing physical layouts. We propose STEP-KD (Sequential Timing Evaluation via Progressive Knowledge Distillation), which leverages intermediate design stages as ``stepping stones'' for progressive knowledge transfer rather than attempting direct prediction. STEP-KD trains teacher models at the post-routing, post-placement, and post-floorplan stages, then sequentially distills their knowledge to a post-synthesis student model through representation alignment. Experiments on diverse circuits demonstrate that STEP-KD reduces timing prediction error compared to direct distillation and supervised baselines, and in most settings compared to the industry-standard Static Timing Analysis (STA) tool. STEP-KD reduces the weighted mean absolute percentage error of Total Negative Slack prediction to 19.78\%, compared with 74.84\% for STA. Our proposed method is step forward to identify timing problems earlier, avoiding expensive late-stage redesigns.

0.36

Toward Autonomous RTL and Synthesis Optimization: Benchmarking and Self-Improving Agents

cs.AI cs.AR ·2026-11-10 ·Wenji Fang, Yao Lu, Jinghua Wang, Zhiyao Xie
published similarity 0.60
Abstract · ASP-DAC'27 Invited Paper

Recent advances in large language models (LLMs) and autonomous agents are creating new opportunities for hardware design optimization. This paper examines three connected directions toward autonomous RTL and synthesis optimization: (1) Realistic benchmarking. We discuss reference-based and open-ended RTL optimization benchmarks that evaluate optimization opportunities under realistic EDA workflows. (2) Tool-grounded RTL optimization. We present Dr. RTL, a multi-agent framework that automates critical-path analysis, RTL rewriting, and implementation-level evaluation, while continuously improving through reusable optimization skills. Evaluated on 20 real-world RTL designs, Dr.~RTL achieves average WNS/TNS improvements of 21\%/17\% with a 6\% area reduction over commercial synthesis. (3) Design-specific synthesis optimization. We explore agent-driven synthesis script tuning and the discovery of executable synthesis algorithms across intermediate representations, technology-independent optimization, and technology mapping. Finally, we envision AI-native design automation that jointly explores architectural, RTL, and EDA algorithm design spaces, guided by verification constraints and implementation feedback.

0.20

Temporal Property-driven Design Space Exploration with Reinforcement Learning for Cyber-Physical Systems

eess.SY ·2026-08-24 ·Tagir Fabarisov, Maxime Cordy
published similarity 0.59
Abstract · Accepted manuscript for IECON 2026 - 52nd Annual Conference of the IEEE Industrial Electronics Society, Doha, Qatar, 18-21 October 2026

Design-space exploration of configurable Cyber-Physical Systems (CPS) requires executable evaluation when design choices affect timing, fault propagation, recovery behavior, and temporal-property satisfaction. Repeated stochastic executions make exhaustive exploration impractical for large design spaces. This paper presents a temporal-property-driven CPS design workflow using Reinforcement Learning (RL). At design time, the RL agent selects subsystem alternatives to assemble a candidate system model. The model is then evaluated through simulation, during which online temporal-property monitors observe runtime traces and produce functional-property violation indicators. These indicators are combined with evaluated non-functional terms for budget, recoverability, sustained compliance, and operational use to calculate the reward used for subsequent candidate selection. The workflow is evaluated on a methane-sensitive mine-pump CPS. The corresponding executable case-study model is provided as additional contribution. RL-guided search identifies the highest-reward design observed in the experiments after 26 episodes (corresponds to 130 executable simulations). These designs were reached with fewer simulations than surrogate-guided Bayesian Optimization and population-based Genetic Algorithm baselines under the same executable model and reward formulation. Ablation study results indicate that value-based feedback and reuse of previous simulation traces contribute to this reduction.

0.22

PINNForge: Execution-Grounded Evolutionary Design of Physics-Informed Neural Networks

cs.AI ·2026-09-19 ·Mingyang Yu, Xu Yang, Jun Zhang, Jing Xu, Keqian Li
similarity 0.59
Abstract

Physics-informed neural networks (PINNs) require coordinated choices across representation, architecture, sampling, constraints, loss construction, and optimization, yet effective configurations can vary substantially across partial differential equations (PDEs). Existing automated design methods search over these choices, but training outcomes are still used primarily to rank candidates rather than to inform subsequent designs. We develop PINNForge, an execution-grounded large language model (LLM)-driven evolutionary framework that treats observed PINN training behavior as a cross-generation design signal. PINNForge initializes diverse configurations from PDE-related prior knowledge, executes them, retains globally strong configurations, and feeds their execution evidence and accumulated run-level experience back to the LLM. The LLM then revises and recombines coupled design components or explores new combinations within a generate--execute--evaluate--evolve loop. Across 25 PDE benchmarks, PINNForge achieves the lowest mean MSE on 24 tasks among RoPINN, PINNsFormer, PINNsAgent, and PINNForge. Removing knowledge guidance, execution feedback, or evolutionary search increases the median task-wise MSE ratio to 3.74$\times$, 12.10$\times$, and 10.10$\times$, respectively, relative to full PINNForge.

0.14

Online Automated Algorithm Design with Large Language Models

cs.NE ·2026-09-21 ·Zhiyao Zhang, Yichen Li, Xingyu Wu, Liang Feng, Kay Chen Tan
benchmark similarity 0.59
Abstract

Large language models (LLMs) enable automated algorithm design (AAD) through reasoning and code synthesis. However, most existing LLM-based AAD methods separate algorithm design from target optimization, deploying a fixed design even as the optimization state evolves. Conventional adaptive optimizers can respond to such changes, but their adjustments remain confined to predefined parameters, operators, or strategies. To address these limitations, we introduce online LLM-based AAD, a novel optimization paradigm that treats the algorithm itself as a state-dependent decision variable. At each stage, LLM agents synthesize an algorithm with new behavior logic from the current optimization state. Executing the generated algorithm advances the search and provides feedback for subsequent designs, coupling algorithm design with target optimization without requiring a separate offline algorithm pretraining stage. To implement this paradigm, we propose OnDesign, a multi-agent framework that reconciles competing design perspectives to synthesize executable algorithms and uses execution feedback to refine how runtime evidence is interpreted for subsequent designs. We evaluate OnDesign across two mainstream black-box optimization paradigms on three scenarios: Bayesian optimization, evolutionary continuous optimization, and evolutionary mixed-variable optimization. Extensive experiments on six benchmark suites and one engineering problem across multiple problem dimensions demonstrate superior overall performance over conventional optimizers and offline LLM-based AAD methods.

0.15