CS Paper Radar

Climbing the Design Ladder: Sequential Knowledge Distillation for Early-Stage Circuit Timing Prediction

Reza Moravej, Fahad Rahman Amik, Zhanguang Zhang, Didier Chételat, Yingxue Zhang

cs.LG cs.AR ·submitted 2026-10-05 17:33 UTC · v1

Abstract

Integrated circuit design involves multiple design stages: logic synthesis, floorplanning, placement, and routing, with each stage taking hours to weeks to complete. Discovering timing violations late in this flow forces costly iterations back to earlier stages, wasting computational resources and delaying product launches. While predicting post-routing timing from early-stage data could prevent these failures, existing machine learning approaches struggle with the massive abstraction gap between post-synthesis logical descriptions and post-routing physical layouts. We propose STEP-KD (Sequential Timing Evaluation via Progressive Knowledge Distillation), which leverages intermediate design stages as ``stepping stones'' for progressive knowledge transfer rather than attempting direct prediction. STEP-KD trains teacher models at the post-routing, post-placement, and post-floorplan stages, then sequentially distills their knowledge to a post-synthesis student model through representation alignment. Experiments on diverse circuits demonstrate that STEP-KD reduces timing prediction error compared to direct distillation and supervised baselines, and in most settings compared to the industry-standard Static Timing Analysis (STA) tool. STEP-KD reduces the weighted mean absolute percentage error of Total Negative Slack prediction to 19.78\%, compared with 74.84\% for STA. Our proposed method is step forward to identify timing problems earlier, avoiding expensive late-stage redesigns.

Closest papers

Nearest neighbours by meaning across the whole index.

PPAPlace: Differentiable Cross-Stage Objectives for Chip Placement Optimization

cs.LG cs.AIcs.AR ·2026-08-13 ·Ruogu Chen, Jie Han
publishedcode/data similarity 0.62
Abstract · 9 pages, 4 figures, 6 tables, accepted at ICCAD 2026

Macro placement significantly affects a chip's post-route performance, power, and area (PPA). Most placement methods optimize half-perimeter wirelength (HPWL) as the primary objective. However, recent benchmarking shows a near-zero correlation between HPWL and post-route timing metrics such as the worst negative slack (WNS) and total negative slack (TNS). As a result, all six evaluated artificial intelligence (AI) placers degraded PPA relative to the hierarchical baseline. Recent efforts have tried to train cross-stage predictors to close this gap. However, existing methods focus on macro-only representations and use pre-route metrics as training labels. A label fidelity study of ten circuits at four design flow stages reveals that HPWL and pre-route timing poorly reflect final post-route timing rankings. In contrast, post-global-routing achieves the best balance between final timing fidelity and label generation cost-effectiveness. Based on this finding, PPAPlace is a timing-driven differentiable surrogate predicting post-route PPA from macro and standard-cell placements. The surrogate is a dual-stream predictor that combines graph attention over the chip netlist with spatial convolution over the placement grid. It is trained on post-global-routing labels. The predicted WNS and TNS gradients flow end-to-end back to cell coordinates. PPAPlace exploits these gradients in two ways: as a co-objective injected into an analytical placer's optimization loop (PPAPlace-CoOpt), and as a post-placement refinement step that adjusts macro positions via projected gradient descent (PPAPlace-Refine). On five ChiPBench test circuits excluded from training, PPAPlace improves average WNS and TNS by 22\% and 51\% over the hierarchical baseline while preserving power and routability, using the same predictor without test-circuit retraining. Code is available at https://github.com/ValleyC/PPAPlace.

0.53

LevelSyn: Physical-Aware Logic Synthesis via Level-Asynchronous Graph Neural Networks

cs.AR cs.AIcs.LG ·2026-09-03 ·Jingyi Zhou, Zhengyuan Shi, Ziyang Zheng, Qiang Xu
publishedbenchmark similarity 0.62
Abstract

As integrated circuit technology scales into the nanometer regime, the traditional disconnect between logic synthesis and physical design has led to significant PPA (Power, Performance, and Area) degradation and prolonged design closure cycles. Traditional logic synthesis relies on non-physical Wire Load Models (WLMs), while recent spectral-based placement predictors often neglect the inherent hierarchical logic depth and signal flow of netlists, which leads to low-fidelity spatial estimations. To bridge this gap, we propose LevelSyn, a novel physical-aware logic synthesis framework that integrates hierarchical representation learning with a wirelength-driven optimization engine. At its core, LevelSyn leverages a level-asynchronous Graph Neural Network (GNN) to predict high-fidelity gate coordinates by capturing the structural and directional semantics of And-Inverter Graphs (AIGs). To handle industrial-scale designs, a level-aligned subgraph partitioning strategy is introduced to eliminate memory bottlenecks while preserving local logical dependencies. These spatial insights are seamlessly integrated into a newly developed physical-informed synthesis engine within the Berkeley ABC framework. Experimental results on the EPFL benchmark suite demonstrate that LevelSyn significantly outperforms state-of-the-art (SOTA) methods, achieving an average power reduction of 6.89\% and a timing delay improvement of 27.48\%. Furthermore, post-place-and-route validation shows a 99.59\% reduction in design rule check (DRC) violations, highlighting its effectiveness in accelerating design convergence.

0.28

SynAct: A Reasoning-Acting Large Language Model Agent for Adaptive Synthesis Optimization

cs.AR cs.AI ·2026-08-13 ·Fangzhou Liu, Peiyi Han, Jiawei Liu, Yuan Pu, Zhuolun He +3 more
similarity 0.61
Abstract · 12 pages, 8 figures

Logic synthesis transforms RTL designs into gate-level netlists, where PPA results are highly sensitive to the choice of optimization commands, making synthesis tuning both high-dimensional and expensive. Previous approaches fall into two categories: automated methods, which perform black-box search over fixed action spaces with limited decision-level interpretability, and LLM-based methods, which typically generate static scripts upfront and cannot adapt to evolving circuit states. We present SynAct, an adaptive closed-loop LLM reasoning--acting agent that iteratively diagnoses live synthesis reports and reasons over the current circuit state, retrieved tool knowledge, and historical optimization experience to issue targeted commands. SynAct focuses on improving timing, particularly worst negative slack (WNS), while maintaining balanced area and power trade-offs. Experiments on a commercial synthesis tool across 14 designs show that SynAct reduces average WNS to 27% of that from bootstrap synthesis.

0.10

SAFTAC: Simulation-Augmented Fine-Tuning of Open-Source LLMs for Analog Circuit Design

cs.AR cs.AI ·2026-11-05 ·Junsheng Huang, Yifan Sun, Zhuoer Zhang, Ning Wei, Yening Liu +5 more
top venue similarity 0.61
Abstract · Accepted to NeurIPS 2026

Circuit design for analog integrated circuits (ICs) is challenging because circuit topology, device sizing, and circuit performance are tightly coupled. Existing large language model (LLM)-based methods either rely on inference-time correction around frozen models or train on limited circuit types without directly using simulation outcomes as training signals. A key bottleneck is that existing datasets do not provide sufficient task information for training LLMs on end-to-end specification-conditioned design. To fill this gap, we first construct a large-scale simulation-grounded dataset with 8,626 design tasks across 10 different types of analog circuits, where each task includes a textual description, labeled I/O ports, loading condition, target specifications, a testbench, and a reference netlist. Using this dataset, we present SAFTAC, a simulation-augmented fine-tuning framework that trains LLMs to generate and revise analog circuit design. SAFTAC combines three-stage supervised fine-tuning, which progressively builds the capabilities required for analog circuit design and feedback-guided correction, with simulation feedback-augmented reinforcement fine-tuning, which further optimizes models using simulation-grounded rewards. We evaluate SAFTAC under single-pass generation and two-pass generation with simulation feedback, showing improvements over the strongest closed-source LLM by 15.9% and 7.8%, respectively.

0.39

Search-Guided Reasoning Trace Curation for Verilog Generation

cs.AR cs.AI ·2026-10-26 ·Matthew DeLorenzo, Kevin Tieu, Prithwish Jana, Piyush Jha, Dileep Kalathil +2 more
similarity 0.60
Abstract

Recent advances in large language models (LLMs) have improved Verilog generation. However, most training pipelines distill natural-language reasoning traces whose intermediate design decisions are weakly structured and are primarily selected according to the correctness of the final generated RTL. We present MCTS-SFT, a verifier-guided framework for curating reasoning traces for supervised fine-tuning (SFT) of Verilog generation models. MCTS-SFT formulates trace construction as search over intermediate reasoning states and uses Monte Carlo Tree Search (MCTS) to propagate functional feedback from complete Verilog rollouts to earlier design decisions. Within this framework, we introduce Plan-MCTS, which searches over compact hardware-design plans that explicitly represent interfaces, timing, state, behavior, and update rules. We further study plan-preserving supervision, in which the searched structured state is retained as part of the downstream SFT target. Our experiments find that Plan-MCTS achieves the highest functional trace yield, with 84.2% correct traces compared with 81.9% for one-shot structured planning and 82.0% for unguided tree exploration. For identical Plan-MCTS trajectories and Verilog outputs, retaining the explicit searched plan during SFT raises pass@10 from 52.56% to 57.7%, demonstrating that the representation of intermediate design decisions materially affects downstream learning. In a separate 6,000-trace study, MCTS-curated supervision improves pass@10 over full-response chain-of-thought distillation by up to 3.7 points while reducing downstream generation length by approximately 50% on VerilogEval-v2. These results demonstrate that structured hardware planning, verifier-guided search, and explicit intermediate-state supervision provide complementary mechanisms for constructing more effective and token-efficient training data for Verilog generation.

0.17

GoalEvolve: From Handcrafted Algorithm Priors to Goal-Driven Evolution of Physical Design Algorithms

cs.AR cs.AI ·2026-08-17 ·Haixu Liu, Lei Zhou, Yuhao Ren, Yumao Wu, Zhiang Wang
similarity 0.60
Abstract

Physical design algorithms operate within tightly coupled, multi-stage optimization flows, where stage-local gains may vanish or induce downstream degradation. Existing program-evolution frameworks often rely on stage-local objectives or undifferentiated multi-metric feedback, which neither guarantee better final results nor identify which unmet requirement should guide the next iteration. We present GoalEvolve, a goal-driven framework that makes physical design algorithm evolution accountable for the final quality of results (QoR) of the complete flow. Given a multi-objective QoR target region, GoalEvolve converts unmet requirements into normalized target gaps, identifies the dominant bottleneck, and uses stage-resolved checkpoint evidence to locate the responsible stage. An LLM-based Teacher then narrows the search to a relevant algorithmic decision and source region, while parallel Student agents implement and validate hypotheses through full-flow evaluation. Local effects, optimization debt, and downstream retention are retained as mechanism evidence for subsequent evolution. Across eight ASAP7 designs, GoalEvolve improves post-route TNS by 30.67% on average and reduces leakage and dynamic power by 21.18% and 9.42% versus default OpenROAD. Relative to commercial-tool goals, it closes 62.20% of the normalized power gap on power-dominant designs, surpasses the TNS goals on both timing-dominant designs, and closes 32.48% of the equal-weight timing-power gap on joint designs. Across all three designs evaluated against Codex goal mode under matched budgets, GoalEvolve further improves TNS by 26.46% while reducing leakage and dynamic power by 12.38% and 0.76%, respectively.

0.24

OpenLayout: An Open and Agentic-Driven Platform for Holistic VLSI Physical Design and Benchmarking

cs.AR ·2026-11-13 ·Qiufeng Li, Sizhe Tang, Quan Cheng, Zirui Wang, Wantong Li +2 more
publishedbenchmarkpositioncode/data similarity 0.60
Abstract · Accepted by ICCAD2026

Physical design automation of very large-scale integrated circuits (VLSI) has made significant strides, progressing from single-stage placement and routing toward increasingly integrated full-flow implementation. Yet, existing approaches struggle with the vast design space optimization (DSO) arising from diverse technology nodes, circuit designs, and varied constraints. The substantial runtime of physical-design tools further exacerbates this challenge, leaving industrial workflows heavily dependent on experienced engineers to navigate the design space and achieve power, performance, and area (PPA) targets, incurring significant engineering effort. We argue that large language models (LLMs) with strong reasoning capabilities, enriched with distilled human design expertise, offer a promising path toward efficient and automated DSO. Unlike traditional algorithms, LLMs can interpret complex design contexts and naturally incorporate human expertise expressed in natural language for reasoning, acting, observing, and adapting throughout the design process, a capability that conventional optimization methods cannot exploit. To this end, we present OpenLayout, an agentic platform that leverages multi-agent collaboration with embedded design knowledge to enable self-iterative DSO. We further introduce OpenLayout-Bench, a benchmark targeting advanced technology nodes with commercial EDA tools to systematically evaluate physical design automation capabilities of LLMs. Experimental results demonstrate that OpenLayout achieves state-of-the-art performance, with approximately 20% accuracy improvement over baseline methods. Our work is open-sourced at https://github.com/fenggev56/OpenLayout

0.44

SyntheticHLS: Building Diverse Synthetic High-Level Synthesis Datasets using LLMs

cs.AR cs.LG ·2026-09-09 ·Stefan Abi-Karam, Miaoyan Zhou, Callie Hao
publishedbenchmarkcode/data similarity 0.59
Abstract · Accepted and to be presented at the International Conference on Field Programmable Technology (FPT) 2026

Deep learning and large language models (LLMs) are rapidly gaining adoption in semiconductor design, driving demand for training datasets. Most efforts focus on hardware description languages (HDLs) while designs for high-level synthesis (HLS), a popular approach to domain-specific accelerators, remain scarce. HLS dataset efforts emphasize manual curation or design parameterization, seldom addressing high-quality LLM-based generation or diversity in code length, hierarchy, design-space size, latency, resource utilization, and application domain, potentially limiting model generalization. We propose SyntheticHLS, a framework for generating large-scale, complex, diverse synthetic HLS datasets using LLMs. Its two key ideas are: 1) an iterative feedback-guided mutation loop that uses paired HLS source code and design-space specifications to incrementally transform seed designs into more complex, scalable designs; and 2) quantitative metrics of HLS design complexity and design-space scalability that serve as measurable objectives for LLM-guided mutation. We systematically cross-validate an HLS Quality-of-Results (QoR) deep learning model trained and tested across common HLS benchmarks, zero-shot synthetic designs, and iteratively mutated synthetic designs. Synthetic designs transfer well to common benchmark test sets while the reverse does not hold. SyntheticHLS's iteratively mutated designs provide the most generalizable training corpus among the datasets studied. Analysis of the mutation process and dataset shows that metric-guided trajectories consistently improve targeted complexity and scalability objectives without regressing non-target metrics. Mutated designs span a substantially broader, more diverse design space than zero-shot generated designs. Our framework, dataset, and evaluation are open-source: https://github.com/sharc-lab/synthetic-hls.

0.33