CS Paper Radar

PPAPlace: Differentiable Cross-Stage Objectives for Chip Placement Optimization

Ruogu Chen, Jie Han

cs.LG cs.AIcs.AR ·submitted 2026-08-13 21:50 UTC · v1
publishedcode/data

Abstract

Macro placement significantly affects a chip's post-route performance, power, and area (PPA). Most placement methods optimize half-perimeter wirelength (HPWL) as the primary objective. However, recent benchmarking shows a near-zero correlation between HPWL and post-route timing metrics such as the worst negative slack (WNS) and total negative slack (TNS). As a result, all six evaluated artificial intelligence (AI) placers degraded PPA relative to the hierarchical baseline. Recent efforts have tried to train cross-stage predictors to close this gap. However, existing methods focus on macro-only representations and use pre-route metrics as training labels. A label fidelity study of ten circuits at four design flow stages reveals that HPWL and pre-route timing poorly reflect final post-route timing rankings. In contrast, post-global-routing achieves the best balance between final timing fidelity and label generation cost-effectiveness. Based on this finding, PPAPlace is a timing-driven differentiable surrogate predicting post-route PPA from macro and standard-cell placements. The surrogate is a dual-stream predictor that combines graph attention over the chip netlist with spatial convolution over the placement grid. It is trained on post-global-routing labels. The predicted WNS and TNS gradients flow end-to-end back to cell coordinates. PPAPlace exploits these gradients in two ways: as a co-objective injected into an analytical placer's optimization loop (PPAPlace-CoOpt), and as a post-placement refinement step that adjusts macro positions via projected gradient descent (PPAPlace-Refine). On five ChiPBench test circuits excluded from training, PPAPlace improves average WNS and TNS by 22\% and 51\% over the hierarchical baseline while preserving power and routability, using the same predictor without test-circuit retraining. Code is available at https://github.com/ValleyC/PPAPlace.

Comment
9 pages, 4 figures, 6 tables, accepted at ICCAD 2026

Closest papers

Nearest neighbours by meaning across the whole index.

TAPCO-G: LLM-Guided Design-Adaptive Timing and Power Co-Optimization with Graph-Based Physical Priors

cs.AR cs.AI ·2026-11-10 ·Wuqian Tang, Zixiao Wang, Che-Chien Lin, Fong-Hua Fu, Laura Angélica Shion-Korsak +3 more
similarity 0.65
Abstract · 27 pages

Post-placement timing and power co-optimization is critical to meeting setup timing targets and reducing power within placement constraints. A cell replacement can improve timing along one path while increasing power or reducing slack on others. Conventional optimizers follow fixed rules for scheduling and accepting repairs, limiting their ability to address design-specific bottlenecks. A large language model (LLM) can propose changes to these rules, but on its own it cannot reliably estimate how a cell replacement affects endpoint slack and power. TAPCO-G combines LLM-guided optimizer adaptation with graph-based physical priors to evaluate candidate cell replacements. The outer loop tunes tool settings using physical-design feedback and revises executable repair policies when tuning stalls. The inner loop anchors delay estimates to static timing analysis snapshots, accounts for upstream driver-load changes, and propagates delay shifts to timing endpoints. It combines these estimates with coarse-to-fine power screening to prioritize candidates for physical trials. TAPCO-G produced placement-legal, logic-equivalent implementations and outscored CERBERUS on all eight ASAP7 benchmarks from the MLCAD 2026 Contest, with a mean quality score gain of 5.516 points, and scored 21.648 points higher than TAPCO on average. These results demonstrate the effectiveness of the proposed co-optimization framework.

0.24

Hybrid ML for Lightweight Pre-Route Delay Estimation in Open-Source IC Design

cs.LG ·2026-08-18 ·Marvin Castro Castro, Erick Carvajal Barboza
code/data similarity 0.62
Abstract

Static Timing Analysis (STA) is a critical step in the design flow of digital integrated circuits, however, obtaining accurate delay estimations can represent a challenge when limited information regarding physical design is available. In response, this work presents a hybrid and light-weight machine learning (ML) based approach that combines a decision tree with linear regression to improve pre-routing delay estimations generated by the open-source RTL-to-GDSII tool OpenLane. The proposed model achieves an 80\% reduction in error compared to OpenLane's estimates, demonstrates a 71\% improvement even without utilizing OpenLane-specific parameters. Overall, this method offers an alternative to traditional delay propagation techniques and more complex machine learning models that is not only accurate, but is also over 300 times smaller, 2 times faster and offers a higher explainability.

0.28

Climbing the Design Ladder: Sequential Knowledge Distillation for Early-Stage Circuit Timing Prediction

cs.LG cs.AR ·2026-10-05 ·Reza Moravej, Fahad Rahman Amik, Zhanguang Zhang, Didier Chételat, Yingxue Zhang
similarity 0.62
Abstract

Integrated circuit design involves multiple design stages: logic synthesis, floorplanning, placement, and routing, with each stage taking hours to weeks to complete. Discovering timing violations late in this flow forces costly iterations back to earlier stages, wasting computational resources and delaying product launches. While predicting post-routing timing from early-stage data could prevent these failures, existing machine learning approaches struggle with the massive abstraction gap between post-synthesis logical descriptions and post-routing physical layouts. We propose STEP-KD (Sequential Timing Evaluation via Progressive Knowledge Distillation), which leverages intermediate design stages as ``stepping stones'' for progressive knowledge transfer rather than attempting direct prediction. STEP-KD trains teacher models at the post-routing, post-placement, and post-floorplan stages, then sequentially distills their knowledge to a post-synthesis student model through representation alignment. Experiments on diverse circuits demonstrate that STEP-KD reduces timing prediction error compared to direct distillation and supervised baselines, and in most settings compared to the industry-standard Static Timing Analysis (STA) tool. STEP-KD reduces the weighted mean absolute percentage error of Total Negative Slack prediction to 19.78\%, compared with 74.84\% for STA. Our proposed method is step forward to identify timing problems earlier, avoiding expensive late-stage redesigns.

0.36

EGGPlacer: Energy-Guided Generative Chip Placement with Diffusion Models

cs.AR cs.AI ·2026-10-22 ·Qi Zhou, Guojun Liu, Juanhong Zhao, Guangzhi Qi, Zehao Chen +1 more
similarity 0.61
Abstract · 27 pages, 9 figures, 11 tables. Preprint

Chip placement strongly affects routed wirelength and thermal behavior, yet these downstream metrics are difficult to evaluate during macro placement. Learning-based macro placers commonly optimize the macro-only half-perimeter wirelength (HPWL), denoted mHPWL, which ignores standard cell connectivity and spatial demand. In contrast, analytical mixed-size placers optimize differentiable full netlist wirelength and density objectives but are typically unaware of thermal effects. We propose EGGPlacer, an energy-guided diffusion framework that incorporates analytical placement feedback and thermal feedback into macro placement generation. An analytical placer acts as an online physical response model, exposing the standard cell distribution and a full netlist wirelength proxy induced by each intermediate macro placement, while a differentiable thermal model provides temperature feedback. These signals are formulated as composable energies and injected throughout reverse diffusion without retraining the underlying generative model. Experiments on public placement benchmarks show that EGGPlacer achieves competitive mixed-size HPWL relative to strong analytical and learning-based macro placers. In the end-to-end evaluation, EGGPlacer also obtains the lowest average routed wirelength and peak temperature among the evaluated methods. Ablation studies further demonstrate that analytical and thermal guidance provide distinct and complementary benefits across wirelength proxies, routed wirelength, and thermal objectives.

0.29

Evaluating AI Agents for Industrial-Level Chip Floorplanning: A Framework and Empirical Study

cs.AI ·2026-11-09 ·Nova-Silicon Team
similarity 0.60
Abstract

Floorplanning is an early step in turning a logical circuit into a physical chip: it positions large circuit modules and constrains the space available for subsequent logic placement and wiring. These decisions affect congestion and timing, but their physical consequences emerge through downstream implementation. For AI agents, the task requires translating engineering constraints into spatial decisions whose quality cannot be judged by successful tool execution alone. We present an evaluation framework that connects submitted layouts to a prescribed downstream implementation flow, checks geometric validity, measures physical quality, and reports resource use. On one industrial design whose 99 macros occupy approximately 71\% of a fixed L-shaped layout region, we compare our specialized system Nova-SI with general-purpose engineering agents and agents restricted to file access, obtaining complete physical measurements for 39 layout outputs. Under our 0--100 composite quality score, Nova-SI achieves a mean of 57.97 without online feedback from the prescribed power-grid and placement evaluation, compared with 31.17 for the strongest measured general-purpose configuration, GPT-6 Astra. The difference is supported by raw congestion and timing measurements and persists across scoring-sensitivity checks. Layout-level analysis further shows that similar global utilization can conceal substantially different local congestion. Together, the protocol and case study assess agents through the physical consequences of their delivered layouts and provide evidence about system performance on this industrial instance.

0.23

TicTacBench: Benchmarking Timing Closure Capabilities of Coding Agents

cs.AI ·2026-09-20 ·Bowei Wang, Zhigang Fang, Zhijie Yang, Renzhi Chen, Shanshan Li +1 more
publishedbenchmark similarity 0.58
Abstract · Accepted at ICCD26

Recent advances in large language models (LLMs) have led to the emergence of coding agents capable of performing complex engineering tasks, including register-transfer level (RTL) design and optimization. Existing RTL benchmarks mainly evaluate functional correctness and performance, power, and area (PPA) of the generated RTL designs, leaving agents' ability for \emph{timing closure} under-evaluated. We propose TicTacBench, a benchmark specifically designed to evaluate coding agents' capabilities for RTL-level timing closure under post-place-and-route (post-PnR) evaluation. TicTacBench contains 30 diverse tasks, each provided with a suboptimal RTL design, realistic timing constraints, functional equivalence verification, and timing reports. With over 300 runs of coding agents driven by 8 frontier LLMs, we find that even the best agent can only close 53.3\% of tasks with 7.18\% area-delay product (ADP) degradation and 8.83\% energy-delay-squared product (EDDP) improvement on average. We identify common failure categories that explain why agents fail to close timing. Then we propose TicTacSkill, a new method that guides agents to follow standard timing-closure procedures and improves the Timing Closure Rate by 9\%. These results suggest that while coding agents have made significant progress in RTL design, their timing-closure capability still has substantial room for improvement.

0.30

Coarse-to-Fine Macro Placement via Evolutionary Search and Critical Macro Tuning

cs.AR ·2026-09-28 ·Biao Liu, Zhiping Jin, Kaixuan Sun, Zengrui Lu, Qingquan Zhang +1 more
benchmarkcode/data similarity 0.58
Abstract · 18 pages

Macro placement is a critical stage in chip physical design that substantially affects downstream implementation quality. Recent search-based methods improve existing layouts through partial reconstruction, but quality-biased or spatially restricted macro selection can limit the diversity of reconstruction proposals, potentially hindering escape from local optima. Moreover, coarse-grid representations restrict placement precision. To address these challenges, we propose C2FPlace, a \textbf{C}oarse-to-\textbf{F}ine macro \textbf{Place}ment framework that integrates population-based evolutionary search with fine-grained refinement. During coarse-grained optimization, tournament selection chooses promising parents from randomly sampled groups of layouts, and stochastic partial rip-up and re-place generates offspring by sampling macro subsets across the entire layout. A two-phase schedule samples reconstruction ratios from a higher range early in the search and a lower range later, supporting broad exploration followed by more conservative refinement. During fine-grained optimization, critical macro tuning enables positional adjustments beyond the coarse grid to obtain additional half-perimeter wirelength (HPWL) reduction. Experiments on the ISPD2005 benchmark show that C2FPlace reduces HPWL by 17.82\% over EGPlace and 17.86\% over RollPlace on average. On the ICCAD2025 benchmark, C2FPlace achieves the best average ranking among the compared methods under the evaluated power, performance, and area (PPA) metrics. Our codes are available in \href{https://github.com/lxxxxb/C2FPlace}{https://github.com/lxxxxb/C2FPlace}.

0.40

Topology as a Design Variable: Joint Architecture-Sizing Optimization for SRAM

cs.LG ·2026-11-06 ·Can Wang, Junhao Ma, Yikai Wang, Shan Shen, Wei W. Xing
publishedcode/data similarity 0.57
Abstract · Accepted by ASPDAC2027

SRAM's power-performance-area-stability trade-off depends on bitcell topology, a discrete architectural choice that interacts non-separably with continuous transistor sizing. However, no open-source SRAM tool treats topology as an optimizable variable. OpenRAM generates SRAM layouts but performs no optimization, while OpenYield supports high-fidelity evaluation but restricts optimization to scalar sizing of a fixed 6T cell. OpenYieldV2 closes this gap through three integrated contributions. First, a fully parameterized compiler generates complete 6T and 10T SRAM macros with peripheral circuits and replica-bitline self-timing, enabling topology comparison under identical simulation conditions. Second, a few-shot TabPFN surrogate learns topology-dependent PPA responses with limited full-macro SPICE samples. Third, a coarse-to-refined multi-objective optimizer combines global exploration of discrete architectural choices with local refinement of continuous transistor sizes. Experiments across varying design conditions reveal a topology decision boundary that shifts with operating constraints rather than following a fixed design rule. Jointly optimizing across this boundary improves hypervolume by up to 17.3\% over the strongest single-topology baseline. OpenYieldV2 is open-source to support reproducible SRAM design research.

0.39