CS Paper Radar

TAPCO-G: LLM-Guided Design-Adaptive Timing and Power Co-Optimization with Graph-Based Physical Priors

Wuqian Tang, Zixiao Wang, Che-Chien Lin, Fong-Hua Fu, Laura Angélica Shion-Korsak, Xinyun Zhang, Bei Yu, Chun-Yao Wang

cs.AR cs.AI ·submitted 2026-11-10 11:19 UTC · v1

Abstract

Post-placement timing and power co-optimization is critical to meeting setup timing targets and reducing power within placement constraints. A cell replacement can improve timing along one path while increasing power or reducing slack on others. Conventional optimizers follow fixed rules for scheduling and accepting repairs, limiting their ability to address design-specific bottlenecks. A large language model (LLM) can propose changes to these rules, but on its own it cannot reliably estimate how a cell replacement affects endpoint slack and power. TAPCO-G combines LLM-guided optimizer adaptation with graph-based physical priors to evaluate candidate cell replacements. The outer loop tunes tool settings using physical-design feedback and revises executable repair policies when tuning stalls. The inner loop anchors delay estimates to static timing analysis snapshots, accounts for upstream driver-load changes, and propagates delay shifts to timing endpoints. It combines these estimates with coarse-to-fine power screening to prioritize candidates for physical trials. TAPCO-G produced placement-legal, logic-equivalent implementations and outscored CERBERUS on all eight ASAP7 benchmarks from the MLCAD 2026 Contest, with a mean quality score gain of 5.516 points, and scored 21.648 points higher than TAPCO on average. These results demonstrate the effectiveness of the proposed co-optimization framework.

Comment
27 pages

Closest papers

Nearest neighbours by meaning across the whole index.

PPAPlace: Differentiable Cross-Stage Objectives for Chip Placement Optimization

cs.LG cs.AIcs.AR ·2026-08-13 ·Ruogu Chen, Jie Han
publishedcode/data similarity 0.65
Abstract · 9 pages, 4 figures, 6 tables, accepted at ICCAD 2026

Macro placement significantly affects a chip's post-route performance, power, and area (PPA). Most placement methods optimize half-perimeter wirelength (HPWL) as the primary objective. However, recent benchmarking shows a near-zero correlation between HPWL and post-route timing metrics such as the worst negative slack (WNS) and total negative slack (TNS). As a result, all six evaluated artificial intelligence (AI) placers degraded PPA relative to the hierarchical baseline. Recent efforts have tried to train cross-stage predictors to close this gap. However, existing methods focus on macro-only representations and use pre-route metrics as training labels. A label fidelity study of ten circuits at four design flow stages reveals that HPWL and pre-route timing poorly reflect final post-route timing rankings. In contrast, post-global-routing achieves the best balance between final timing fidelity and label generation cost-effectiveness. Based on this finding, PPAPlace is a timing-driven differentiable surrogate predicting post-route PPA from macro and standard-cell placements. The surrogate is a dual-stream predictor that combines graph attention over the chip netlist with spatial convolution over the placement grid. It is trained on post-global-routing labels. The predicted WNS and TNS gradients flow end-to-end back to cell coordinates. PPAPlace exploits these gradients in two ways: as a co-objective injected into an analytical placer's optimization loop (PPAPlace-CoOpt), and as a post-placement refinement step that adjusts macro positions via projected gradient descent (PPAPlace-Refine). On five ChiPBench test circuits excluded from training, PPAPlace improves average WNS and TNS by 22\% and 51\% over the hierarchical baseline while preserving power and routability, using the same predictor without test-circuit retraining. Code is available at https://github.com/ValleyC/PPAPlace.

0.53

TicTacBench: Benchmarking Timing Closure Capabilities of Coding Agents

cs.AI ·2026-09-20 ·Bowei Wang, Zhigang Fang, Zhijie Yang, Renzhi Chen, Shanshan Li +1 more
publishedbenchmark similarity 0.61
Abstract · Accepted at ICCD26

Recent advances in large language models (LLMs) have led to the emergence of coding agents capable of performing complex engineering tasks, including register-transfer level (RTL) design and optimization. Existing RTL benchmarks mainly evaluate functional correctness and performance, power, and area (PPA) of the generated RTL designs, leaving agents' ability for \emph{timing closure} under-evaluated. We propose TicTacBench, a benchmark specifically designed to evaluate coding agents' capabilities for RTL-level timing closure under post-place-and-route (post-PnR) evaluation. TicTacBench contains 30 diverse tasks, each provided with a suboptimal RTL design, realistic timing constraints, functional equivalence verification, and timing reports. With over 300 runs of coding agents driven by 8 frontier LLMs, we find that even the best agent can only close 53.3\% of tasks with 7.18\% area-delay product (ADP) degradation and 8.83\% energy-delay-squared product (EDDP) improvement on average. We identify common failure categories that explain why agents fail to close timing. Then we propose TicTacSkill, a new method that guides agents to follow standard timing-closure procedures and improves the Timing Closure Rate by 9\%. These results suggest that while coding agents have made significant progress in RTL design, their timing-closure capability still has substantial room for improvement.

0.30

AI-Driven, Timing-Aware Power Optimization

cs.AR cs.LG ·2026-10-08 ·Amit Sharma
similarity 0.60
Abstract

Post-route power recovery changes cell choices under tightly coupled timing, electrical and physical constraints, and the value of each change depends on what it costs to repair its side effects. We propose an AI-driven framework in which a learned model drives both phases of the optimization: it ranks the powerrecovery edits to try and the repair actions that follow, while deterministic electronic design automation (EDA) analyses govern every acceptance. The framework records baseline constraint margins, identifies the damage a recovery transaction introduces in each analysis view, holds pre-existing violations at their baseline rather than working them inside the power step, and caps repair spending at a fraction of the measured saving. An ensemble of gradient-boosted models predicts power change, normalized damage reduction and constraint-regression risk from action and timing-context features available before each trial; calibrated, conservative estimates feed separate acquisition scores for recovery and repair, with a deterministic fallback when the model is uncertain. Recovery and repair remain speculative until physical implementation and fresh analysis establish baseline preservation and positive net saving. We specify the contract, the learned policy, the transactional flow and a pre-registered public evaluation protocol on open designs. Evidence from a companion study on public designs supports the contract; the learned policy is proposed, and no trained-model results or proprietary design measurements are reported.

0.21

Hydra: Phase-Aware Workload Characterization of LLM Inference across Edge SoC Generations, Backends, and Quantization Levels

cs.AR cs.AIcs.DCcs.PF ·2026-08-25 ·Amir Taherin, Sana Taghipour Anvari, Charles Amante, Yixiao Chen, Ruben Noroian +7 more
publishedcode/data similarity 0.59
Abstract · Accepted at the IEEE International Symposium on Workload Characterization (IISWC 2026)

Edge LLM deployment is shaped by more than model size and precision: inference backend, hardware platform, memory traffic, and power management all affect latency and efficiency. We present Hydra, a common-schema, phase-aware workload characterization framework for LLM inference on edge SoCs. Hydra instruments HuggingFace Transformers and llama.cpp with a shared per-prompt timing schema and fuses those records with hardware telemetry, enabling a multi-dimensional characterization of performance, system-resource utilization, and efficiency across prefill and decode phases. Using Hydra, we evaluate three consecutive edge System-on-Chip (SoC) generations (AGX Xavier, AGX Orin, and AGX Thor), 13 instruction-tuned LLMs from seven families, five execution formats, and consider input/output-length sensitivity. The resulting artifact contains roughly 107K per-prompt records and is publicly released with Hydra. Our analysis shows that aggregate latency alone hides key deployment effects: backend structure changes where latency is introduced, quantization reduces memory traffic and energy but does not predict power monotonically, and SoC generation changes how utilization and efficiency should be interpreted. By connecting phase-level timing with system-resource utilization and efficiency metrics, Hydra enables reproducible, phase-aware characterization of edge LLM inference. Hydra's source code and the collected per-prompt trace corpus are available open-source at: https://github.com/amirtaherin/hydra

0.66

WaveletECO: A Closed-Loop Physical ECO Platform and a Specialized Local Language Model

cs.AR cs.AI ·2026-09-20 ·Guoxiang Xu, Guozhen Ji, Zijian Luo, Zhengrui Chen, Qi Sun +1 more
similarity 0.59
Abstract · 5 pages, 2 figures, 2 tables

Engineering change order (ECO) is an important step in repairing timing and electrical violations during the late stages of chip design. Existing Agentic EDA methods primarily focus on tool invocation, with less attention to model decision quality and targeted training. A central challenge in ECO is multi-round decision-making: the model must use the results of each round to determine the next repair action. We propose WaveletECO, which integrates a closed-loop execution platform with large language models to enable agents to execute ECO decisions effectively. We also train a local 9B model through supervised fine-tuning and CPO-SimPO using execution demonstrations and decision-preference data, enabling ECO decision-making with a locally deployed model. Across 594 evaluation runs on 22 designs, WaveletECO-Policy (BF16) and (INT8) score 79.63 and 79.65, respectively, compared with GPT-6 Astra's 77.44. The estimated inference cost of INT8 is about 1/147 of GPT-6 Astra's. These results show that specialized model training supports effective, low-cost multi-round ECO repair, with repair quality retained under INT8 quantization.

0.24

The Inference Engineering Pareto Atlas: Which Optimizations Dominate the Cost, Quality, and Latency Frontier?

cs.AI ·2026-09-15 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.59
Abstract

LLM inference optimizations report speedups on different models, GPUs, prompts, and quality metrics, making them hard to compare or combine. We build a cost, quality, and latency Pareto atlas to identify the best configurations for different deployment constraints. Since exhaustive testing is impractical, we measure 54 configurations of Qwen2.5-7B-Instruct running on vLLM 0.12 across L4, A100, and H100 GPUs and use these anchors to calibrate a simulator. It reproduces measurements at anchored batch sizes, with cross campaign drift below 1.5 percent. A separate quality evaluation tests FP16, AWQ 4bit, FP8 weights, and FP8 KV cache on 200 GSM8K questions with five examples per prompt. Sparse attention is evaluated only in simulation. On the calibrated grid, 18 of 36 configurations reach the Pareto frontier. Combined methods reach it more often than individual methods, with 9 of 15 combinations versus 9 of 21 single methods. Quality testing changes the winners. AWQ 4bit reduces per token latency to 0.34 times baseline on L4 but loses 5.9 percent of strict GSM8K accuracy, narrowly missing the 95 percent quality floor within sampling uncertainty. Flexible answer extraction matches FP16 accuracy, suggesting the loss comes from formatting rather than arithmetic. FP8 weights retain 99.4 percent of baseline accuracy at 0.61 to 0.65 times baseline latency across all three GPUs and appear in three of four regime winners. A naive FP8 KV cache maintains normal throughput but answers none of the 200 questions correctly, showing why speed alone is insufficient. Under two prompt designs, n gram speculative decoding measures at 0.90 to 0.98 times baseline and adds no benefit on this stack. The best choice depends on the constraint and GPU: H100 wins for tight latency, while A100 wins for throughput and low cost at 0.106 dollars per million tokens.

0.16

ECO: Energy-Oriented Configuration Optimization for Attention FFN Disaggregated LLM Serving

cs.AR ·2026-10-06 ·Zou Qingyun, Bin Gao, Zhuobin Huang, Weng-Fai Wong, Tulika Mitra +1 more
similarity 0.59
Abstract

Energy-efficient LLM serving requires minimizing serving GPU energy while meeting latency and throughput service-level objectives (SLOs). Attention--FFN disaggregation (AFD) enables separate resource allocation and operating controls for attention and expert computation, but their energy effects remain coupled through the execution pipeline. Realizing its energy-saving potential therefore requires navigating a hierarchical configuration space in which deployment structures constrain admissible controls and shape their end-to-end effects. Finding low-energy configurations that meet SLOs is challenging because physical evaluations are costly and only a small fraction of candidates can be measured. We present Energy-Oriented Configuration Optimization (ECO), which jointly searches deployment structures and their admissible operating controls under a limited measurement budget. ECO constructs a structure-aware energy prior from calibrated stage behavior and pipeline dependencies, then learns residual prediction errors with a Gaussian process. Its cost-aware constrained Bayesian optimization prioritizes measurements according to expected energy improvement while accounting for SLO feasibility, execution success, and evaluation cost, and returns the lowest-energy measured feasible configuration. Across all 16 scenarios on A6000 and A100 with Qwen and DeepSeek, ECO's frozen configurations, evaluated on disjoint requests, reduce serving energy by 40.5\% and increase output token rate by 20.7\% on average relative to baselines while meeting target SLOs. Across the 8 A6000 scenarios, its selected feasible energy averages 33.1\% below generic constrained Bayesian optimization and 25.8\% below genetic search.

0.21

StateTune: Transforming LLM-Assisted EDA Flow Tuning into a Stateful, Closed-Loop Process

cs.AR cs.LGcs.MA ·2026-08-19 ·Kunlong Li, Shangshang Yao, Su Zheng, Lingli Wang
publishedbenchmark similarity 0.59
Abstract · Accepted to the 2026 IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

EDA flow parameter tuning is critical for quality-of-results~(QoR), yet the parameter space is large, tightly coupled, and full evaluations are prohibitively expensive. Prior LLM-assisted tuners mainly use the LLM as an external proposer with transient working context; we instead present \textbf{StateTune}, which reformulates LLM-assisted EDA tuning as a closed-loop, state-carrying process. Its optimizer state is a typed, evidence-gated \emph{persistent optimization memory} that is updated by every evaluation and shared between candidate generation and budget allocation. On top of this optimizer state, an expected hypervolume improvement (EHVI)-guided, runtime-aware promotion policy ranks quick-stage candidates by expected Pareto frontier gain per unit of runtime cost. Evaluated on a Cadence industrial flow across six benchmark blocks (two technology nodes \(\times\) three designs), against five baselines including LLM+retrieval-augmented generation (RAG) and preference-based Bayesian optimization (BO) tuners, StateTune achieves the strongest final hypervolume on all six benchmark blocks, showing a stable improvement in frontier quality across the full matrix; it also matches or surpasses the strongest baselines on worst negative slack (WNS), area, and power across the same set. Ablation shows persistent memory is the largest contributor: removing it costs 58.5\% of the hypervolume. Dedicated analyses of evidence-gating sensitivity, memory poisoning, cross-design transfer, and three-seed reproducibility (CV\,\(<\)\,7\% on five of six blocks) further validate the memory design.

0.49